Self-leveling epoxy two-component water-based
Two-component self-levelling epoxy resin under water.
CHARACTERISTICS AND USE
It is used to make softwood floor self-levelling coatings continue, raincoats, with excellent impact resistance, wear resistance, chemical and weathering agents, easy cleaning and maintenance.
Compressive strength ASTM D695 > 50 N/mm2 ASTM D695 compression Module 2,200 N/mm2 about tensile breaking load ISO R527 > 18N/mm2 elongation tensile Module 2% ISO R527 1500N/mm2 flexural elastic modulus about UNI 7219 approximately 480 N/mm2.
INSTRUCTIONS FOR USE
The preparation of surfaces should be carried out by blasting (peening) recovery, Bush-hammering, milling, SECO-do the same conditions. IMPERPAV always applies on dry, clean, free from oil, grease and old paintings. IMPERPAV applies normally on suitable adhesion promoter according to the nature, conditions of support and sovrapponibilit times. The product applies, with American-type toothed spatula to check thickness made after the mixing with hardener. The product must be mixed with quartz aggregates in inert resin ratio 100: 70. The application of low thickness, or tem-low temperatures, can apply for reduced quantities of Quartz. It is possible to apply the roller product, in this case need to dilute it with 3-5% of denatured alcohol. The neutral version can be colored with pigment pastes 0.900 KG to 19.10 (A + B) of neutral IMPERPAV. The application of thin layers some colours (e.g. yellow, Orange, purple, etc.) must be sovradosate 1.8 Kg per IMPERPAV’s why you 19.10 can have a little opaque effect.
consumo per 1 mm di spessore – 0,900 KG/m2.
VERSIONE NEUTRA: latte da 19,10 Kg (base + indurente) – VERSIONE COLORATA: latte da 20 Kg (base + indurente).
Ask for information about the products
Request a free consultation by filling out the form below and sending us your request