CHOOSE PRODUCT:

Select your product from the list or search for Type


DEOSSIDA | Pulitore smacchiatore della patina d'invecchiamento delle pietre
DEOSSIDA

Stain remover for oxidation patinas on stone materials  Concentrated powderd extractor for the removal of oxidation patinas from stone materials exposed to weathering, renewing the look. It’s the ideal for extractive compresses, for a long and deep removal of rust stains and metallic oxides, penetrated in stone materials. RETROCHARACTERISTICS AND USE: Deossida is a specific extractor for compresses. We can use it for a deep removal of oxidation patinas caused by the ageing process of the material, rust stains, other metallic oxides for surfaces, stones, terracotta, cement, cinder and synthetic agglomeration and other stone sorbent materials, except calcareous stones with shiny surfaces (ex. Marble). INSTRUCTIONS FOR USE: knead with water before the use and mix until it forms a paste. Apply the product with a spatula, taking care to leave a coat of 2-3 mm of DEOSSIDA on the surface to clean. In case of removal of stains we recommend, if necessary, to cover the compress with a sheet of plastic (ex. film), to retard water evaporation. Leave drying the compress before of his dry removal with a nylon or sorghum brush. At the end rinse with a lot of water. If necessary, repeat the application. YIELD: on the average with a 1kg of paste (about 300 gr of dust) we can cover about 1mq of surface. PACKAGING: 250gr - 1kg

SMACCHIO LEGNO - Pulitore per legno invecchiato e smacchiatore del tannino
SMACCHIO LEGNO

STAIN REMOVER FOR AGED AND STAINED WOOD FIELDS OF APPLICATION For the extraordinary washing and renewal of wooden surfaces such as floors, coverings, garden furniture, door and window frames, etc. CHARACTERISTICS SMACCHIO LEGNO: removes aging patinas, algae and mold from woods exposed outside, unprotected or with protective impregnating finishes to be restored; renews the natural aspect of aged wood by preparing it for the application of a new protection (paints, oils, various impregnating agents); can also be used as a specific tannin stain remover on wooden surfaces, both raw and treated (oiled or painted); avoids to sand surfaces. INSTRUCTIONS FOR USE Shake it before using; remove previously varnishes, oils, waxes from the wood; apply the product with a paint brush, cloth, sponge or spray; keep the surface wet for 20 - 30 minutes, repeat the application if necessary; rub the surfaces with medium hardness pads or nylon brushes; rinse well with water and let the surface dry; repeat the application if necessary. Before proceeding with the application of any new protection, it is essential to wait for favorable environmental conditions for optimal drying of the wood. SMACCHIO LEGNO isn’t a paint remover or a wax remover and doesn’t remove paint layers, impregnating agents, oils and waxes. Perform preliminary tests on a small area to check the effectiveness of the product. YIELD Depending on the absorption of materials. -in the recovery of old wood 1lt / 6 - 8 m²; -as stain remover 1lt / 12 - 15 m². PACKAGING 1lt-5lt VIDEO

TIXO Smacchiatore per la rimozione delle macchie di olio e grasso di origine animale e vegetale su materiali lapidei
TIXO

Stain remover for the removal of oil stains and grease of animal and vegetable origin of stone materials Product in alkaline dispersion thickened to remove oils and animal and vegetable fats, drying oils, soot and residues (carbon black) from absorbent stone materials. Particularly suitable for vertical surfaces and / or localized interventions. FEATURES AND USE: on all stone materials (Cotto, Stone, glazed ceramics, clinker, stoneware, cements, grits, etc.). Do not use on wood, linoleum, rubber and PVC. Protect the painted surfaces and anodized aluminum from contact with TIXO. INSTRUCTIONS FOR USE: ready to use: proceed with the application of the product with a spatula or palette taking care to leave a layer of at least 3-5 mm TIXO on the stain to remove. If necessary, the extractive duration of the action can be increased by covering the wrap with a sheet of plastic material (eg. Soft tape or Domopack) so as to slow down the evaporation. Always let the wrap dry and then proceed to its removal Dry with nylon brush or broom. Rinse with an acid solution (eg. DELICACID or VIACEM diluted 1: 1 in water) the acid-resistant materials, while for the most delicate materials only rinse with plenty of water. Check that it is removed and repeat the application if necessary. YIELD: according to the absorbency and the type of material. On average, with 1 kg of product it is covers about 1-2 square meters of surface. 

ALGANET - Pulitore per la rimozione di incrostazione biologiche come alghe e licheni sui pavimenti e rivestimenti
ALGANET

Stain remover cleaner for fouling Product that removes deposits, even large, algae, moss and other bio-fouling as blackening by micro-organisms, residues of leaves and flowers, animal excrement, urine, etc. It has a strong power sanitizer on surfaces. It develops more effective action of bleach (sodium hypochlorite). FEATURES AND USE: on all surfaces and exterior stone artefacts (Cotto, Natural Stone, Concrete, Klinker, Porcelain tiles, ceramics, etc.). It has a strong power sanitizing of the treated surfaces. INSTRUCTIONS FOR USE: dissolve in a clean bucket of plastic material a part by weight of ALGANET in 6-8 parts of water (eg. 1 kg of powder in 6-8 liters of water) by mixing for several minutes. For maximum cleaning action, use warm water. The solution thus obtained should be used immediately and consumed within 3-4 hours. It can be applied with a brush, sponge, soft cloth, mop. Wet the surface to be treated, leaving the product to act as long as possible. Subsequently, the surface should be rinsed with water to remove dirt degraded. Proteggre plants, textiles, metal and wood. YIELD: with 1 kg of powder are prepared about 6-8 l iters of cleaning solution (average consumption 1 l / 5-7 sqm).  VIDEO

TOGLIRUGGINE LIQUIDO | Smacchiatore per la rimozione della ruggine dalle superfici in materiale lapideo
TOGLIRUGGINE LIQUIDO

STAIN REMOVER FOR RUST REMOVAL FROM STONE MATERIALS FIELDS OF APPLICATION Specific stain remover for the removal of rust stains and metal oxides surfaces in stone material. CHARACTERISTICS TOGLIRUGGINE LIQUIDO: can be used on all stone materials in general (eg cotto, stone, ceramic and cement). Not being an acidic product, it can be used on precious stone materials such as: polished marbles and travertines, polished grits and slates; removes stains from ferrous contamination (eg rusty ferrous objects); fertilizers based on ferrous sulphate for lawns; it works quickly and leaves no residue. In many cases the removal action takes place in a few minutes (5 - 10 minutes). INSTRUCTIONS FOR USE product ready to use. Proceed with the application of TOGLIRUGGINE LIQUID with a paint brush, taking care to leave a generous layer of product on the stain to be removed. Leave the product to act as long as the reaction to the rust extraction has not occurred successfully (the product will take on a purple color); the time necessary for the reaction depends on the type of material. Don’t let the product to dry on the surface. Once the reaction has occurred, it is advisable to remove the product within 10-15 minutes, rinsing with a slightly alkaline water solution (eg SGRISER diluted 10% in water). Repeat the application if necessary. YIELD: according to the absorption of materials. approximately 1 lt / 6 - 10 m² PACKAGING 0.5 lt - 5 lt VIDEO

PULI GRAFF - Prodotto per la rimozione dei graffiti e pennarelli da partei e muri
PULI GRAFF

Stain remover cleaner for inks and dissolving graffiti Product stain remover to remove the ink stone materials, markers, spray paint in general. Do not leave harmful residues in the material and is also effective for the removal of penetrated ink stains in the porosity of the material. It leaves no odor during use. FEATURES AND USE: on all stone materials (Cotto, Stone, Ceramic glazed and not, clinker, stoneware, cement, grit, etc.). Protect painted surfaces, wood and anodized aluminum from contact with PULIGRAFF. INSTRUCTIONS FOR USE: ready to use. Apply the product with a spatula or palette taking care to leave a layer of at least 3-5 mm PULIGRAFF on the stain to remove. If necessary, the extractive duration of the action can be increased by covering the wrap with a stretchable plastic sheet (eg. Soft tape or Domopack) so as to slow down the evaporation. Always let the wrap dry and then proceed to its removal Dry with a nylon brush or broom. Rinse finally with water. YIELD: on average with 1 kg of product it covers about 1-2 square meters of surface.

SMACCHIO POLVERE | Pulitore smacchiatore per sostanze organiche colorate (vino, frutta, caffè, ecc)
SMACCHIO POLVERE

Stain remover cleaner for colored organic matter (wine, coffee, futta, etc.) Product high effectiveness stain remover for the removal of oxidizable colored spots. It removes stains from stone materials: coffee, wine, juice, food residues typically, blood, urine and tannin. FEATURES AND USE: of Natural Stone, Cotto, Cement, grits, Agglomerates Synthetics, Ceramics. INSTRUCTIONS FOR USE: product to be dissolved in water before use and mix until it forms a paste. Do not use metal containers. Proceed with the application of the product with a spatula or plastic scoop, taking care to leave a layer of 2-3 mm SMACCHIO on the stain to remove. If necessary, the extractive duration of the action can be increased by covering the wrap with a sheet of plastic material (eg. Soft tape or Domopack). Allow to dry the pack prior to its removal Dry with nylon brush or broom. Finally, rinse with plenty of water. Control when removing the stain and repeat the application if necessary. Protect metal surfaces. YIELD: on average with 1 kg of prepared mixture (corresponds to about 300 g of powder) it covers about 1 square meter of surface.

SMACCHIO LIQUIDO | Smacchiatore da vino, frutta, caffè sul cotto, marmo, gres porcellanato, ecc
SMACCHIO LIQUIDO

Stain remover for the removal of organic stains colored stone materials Ready to use product quickly removes the stain of: coffee. wine, fruit, blood and urine tannin from the surfaces in terracotta, stone, cement porcelain stoneware, etc. CARATTESRISTICHE AND USE: on all stone surfaces as : natural stone, terracotta tiles and bricks, cement, synthetic agglomerate, porcelain stoneware, klinker, etc. INSTRUCTIONS FOR USE: Spread the product up to entirely cover the stain. Leave the time necessary for removal of the Stain (from a few minutes up to several hours). Rinse with water. Repeat the application if necessary. Protect the metal surfaces. Do not apply on metals and on surfaces too hot. Yield : in function of the absorption of the material: with 250 ml approximately 1-2mq of surface.

SOLVOSIL - Pulitore Smacchiatore per oli, grassi siliconi, colle e cere su cotto, pietra e agglomerato cementizio
SOLVOSIL

Stain remover for mineral oil stains, adhesives, waxes, silicones Product that removes stains of oils and synthetic lubricant greases, glues, waxes and paint materials from terracotta, stone, concrete and stone materials in general. FEATURES AND USE: on all stone materials (Cotto, Stone, Ceramic glazed and not, clinker, stoneware, cement, grit, etc.). Do not use on synthetic and synthetic slurries agglomerations. It possesses rapid and powerful action of dissolution of stains without leaving marks in the materials of which it is used. It does not leave streaks in the materials of which it is used. Thanks to the special addesante, the action of the product can be in time. INSTRUCTIONS FOR USE: ready to use product. OPEN WITH CAUTION. Mix well. Apply the product with a spatula or palette taking care to leave a layer of at least 3-5 mm SOLVOSIL on the stain to remove. If necessary, the extractive duration of the action can be increased by covering the wrap with a stretchable plastic sheet. Always let the wrap dry and then proceed to its dry-removal nylon brush or broom. Finally rinse with a mild detergent solution (eg. UNIPUL diluted in water). If necessary, repeat the application. Protect the painted and plastic surfaces. YIELD: on average with 1 kg of product it covers about 1-2 square meters of surface.