CHOOSE PRODUCT:

Select your product from the list or search for Type


UNIPUL | detergente universale igienizzante concentrato per pavimenti
UNIPUL

 Concentrated sanitizer universal cleaner Product for the ordinary and/or extraordinary cleaning of all hard surfaces, efficacious also at low concentrations of use. CHARACTERISTICS AND FIELD OF APPLICATION: cleaner at universal use, depending on the concentration in the water. It cleans ceramic materials, stones, cotto, cement and synthetic agglomerates, treated wood. Low foaming detergent. It doesn't leave halos on the surfaces and it isn't necessary rinsing. It leaves a pleasant odour in the environments. INSTRUCTIONS OF USE: Pure up to 1:1 part in water: for extraordinary deep cleaning washings on old waxy treatments on cotto and stones. Spread UNIPUL on the floor, leave it act for few minutes and then rub the surface with medium hard pads, remove the residue and rinse with water. Apply subsequently a coat of IDROFIN. Diluted 1: 3-5 parts in water: for washing where is necessary a strong degreasing action on very dirty surfaces. Diluted 1: 30-40 parts in water: for normal dirt in the ordinary cleaning of not treated hard surfaces. Diluted 1: 80-100 parts in water (1/3 glass in 8–10 lt of water): for the ordinary cleaning of treated floor surfaces, polished stones, glazed ceramics, porcelain stoneware, cement agglomerates, cotto, klinker. YIELD: it depends on the concentration of use. PACKAGING: 1 lt - 5 lt - 10 lt. CORRELATED SYSTEMS OF TREATEMENT: System of manutention and protection of the surfaces System of extraordinary cleaning on floors in cotto, stone and agglomerate 

FLORA | Detergente neutro per pulizia dei pavimenti di casa
FLORA

Concentrated detergent cleaner for floors Neutral detergent product for the ordinary cleaning of all hard surfaces: it combines the sanitizing function and the degreasing power. Not aggressive for the materials CHARACTERISTICS AND FIELD OF USE: not aggressive concentrated cleaner to clean floors in cotto, glazed ceramic, porcelain stoneware, natural stone, cement agglomerate, treated wood, synthetic surfaces. Low foaming detergent that leaves a pleasant odour of lavender in the environment. It doesn't leave halos on the surface. FLORA combines the detergent/degreaser action with an efficacious sanitizing function. INSTRUCTIONS FOR USE:     – Diluted 1: 2-4 parts in water: to remove considerable dirt in the periodic cleaning of untreated surfaces.     – Diluted 1: 20-30 parts in water (a glass in 8-10 litres of water): for normal dirt in the periodic cleaning of hard untreated surfaces.     – Diluted 1: 50-60 parts in water (1/2 glass in 8-10 litres of water): for the ordinary cleaning of polished stone surfaces, glazed ceramics, porcelain stoneware, klinker.     – Diluted 1: 80-100 parts in water (1/4 glass in 8-10 litres of water): for the ordinary cleaning of treated floor surfaces. YIELD: it depends on the concentration of use.  

PULIBRILL | Detergente concetrato brillantante per pavimenti in legno
PULIBRILL

Concentrated detergent for wooden floors  Neutral detergent product for  the ordinary cleaning of all types of floors in wood, painted or treated with oil and wax CHARACTERISTICS AND FIELD OF APPLICATION: concentrated cleaner specific to clean floorings in wood, treated with oil, wax or paint. It cleans and sanitizes surfaces, keeping the brilliance of the treatment during the time. It does not leave halos on the surface. It leaves a pleasant odour of lemon and mint in the environment. INSTRUCTIONS OF USE: the concentration of use depends on the type of dirt to be removed. Measurings: Diluted 1: 1-4 parts in hot water: to remove considerable dirt, in the periodic cleaning of treated surfaces. Diluted 1: 20-30 parts in water (a glass in 8-10 litres of water): for normal dirt in the periodic cleaning of treated surfaces. Diluted 1: 50-60 parts in water (1/3 of glass in 8-10 litres of water): for the daily cleaning of treated surfaces. YIELD: it depends on the concentration of use.  

FLACONE-MARBEC-BIOCARE.png
BIOCARE

Maintainer for oiled wooden floors Description: O/w emulsion of waxes, resins, non-ionic surfactants. Fields of application: maintainer of all wooden surfaces treated with Impregnating systems. Ideal for floors covered in oil ". Performance: resino/emulsion wax specifically for maintenance and preservation in time of impregnation oil treatments-waxy (non-FILM Naturalegno systems). Renews the surface protection treatment. Easy-ease of-repolishable. Does not form films glossy films them. Formulated product in water. Leaves no unpleasant odours in rooms. It does not release toxic or harmful components in environments. Instructions for use: shake before use. Spray or pour small amount of BIOCARE on surface and apply in a thin layer with a soft cloth without leaving excesses. No need to Polish. Do not stagnate the product on wood. BIOCARE can be buffered or rilucidato with a single brush with soft disk to remove marks left by trampling and restore the shine of the surface. Do not step on the surface during drying. BIOCARE can be buffered or rilucidato with a single brush with soft disk to remove marks left by trampling and restore the shine of the surface. Rinse equipment with water before drying of the product. Use Periodicit (depending on use): -every 2-3 months: on surfaces heavily trampled and subject to heavy wear (shops, bars, kitchens, etc.). -every 3-6 months: on moderate use surfaces (e.g. living rooms, bathrooms, tables). -every 12 months: for lower wear surfaces (e.g. rooms, furniture coverings). Surfaces treated with BIOCARE must be washed with PULIBRILL or other suitably neutral cleaners diluted in water.

LIGNOLUX | Cera di manutenzione per pavimenti in legno oliati o cerat
LIGNOLUX

Oil-ceramic maintenance finisher for waxed or oiled wood floors Produced in liquid solution of oils and waxes. It polishes, cleans and renovates wooden surfaces. CHARACTERISTICS AND USE: on all types of wood surfaces treated with oil or wax inside (parquet, coatings, furniture). Do not use on varnished floors. It cleans the surface leaving a satin wax finish, with excellent resistance to tread and dirt. Easily renewable and restoreable over time. INSTRUCTIONS FOR USE: on the floor, sprinkle small amounts of LIGNOLUX on the surface and distribute the product in thin layer with a soft cloth without excess, until completely dry. On coatings and furniture, apply LIGNOLUX by spray / cloth / brush, homogenously wetting the surface without excess. Just dry the surface, polish with brush / pad / soft cloth. Generally, it is sufficient to apply a LIGNOLUX hand. Only on very rough and extremely irregular wooden surfaces may be required to apply a second hand. Rinse the equipment with DILUOIL before drying the product. YIELD: Approximately 1 lt / 30-40 sqm.

BEAUTY FLOOR

Maintenance wax for wood floors and varnished parquet Product that renovates and protects over time the initial coating of interior wood flooring CHARACTERISTICS AND USE: maintenance of all wood surfaces and varnished parquet. Reliable and easy to clean, it leaves a pleasing fragrance in the environment. Do not use on laminate. INSTRUCTIONS FOR USE: Use pure or diluted in water. Shake before use. Distribute small quantities of BEAUTY FLOOR onto the surface or directly on a soft cloth and spread the product in thin layer by homogenously wetting the surface without leaving any excess. Do not step over the product during drying. It is self-clarifying and it is not necessary to redraw. For greater gloss, after drying (15-30 minutes) rub the surface treated with wool cloth or felt polish. Frequency of use: Every 1-2 months: on heavily trampled surfaces and subject to heavy wear (shops, public places, offices, kitchens, bars, restaurants, etc.) Every 4 to 6 months: on moderate use surfaces (salt, entrances, baths) Every 6 to 12 months: on surfaces with minor wear (eg sleeping area, remittances). The surfaces treated with BEAUTY FLOOR must be washed with neutral detergents such as PULIBRILL. YIELD: Indicatively: 1 lt / 50-80 sqm.

DETER CLEAN Detergente sgrassante per legno esterno
DETER CLEAN

Degreaser for treated wood outdoors Product that quickly and thoroughly removes the dirt, smog, dusts, greasy deposits, algae and mold. Contains no solvents. Characteristics and application: the active substances in the formula help to solubilize the fatty substances, disgregandole and making them easily removable without damaging the wood. Returns at quality treated looks fresh and natural. Also ideal for cleaning glass, plastic and metal objects. The product is eco-friendly and readily bio-degradable. Can be used for manual or mechanical washing (i.e. cleaner) safely even in presence of greenery (gardens, planters, etc.). Instructions for use: ready to use product. Spray the product on the surface and wipe with a soft cloth, sponge or nylon brush until the dirt removal. In the case of stubborn dirt, leave product for a few minutes. Rinse with water. Yield: depending on the concentration of usage.

DECO 2 - Soluzione Decolorante per Legno-
DECO 2

Wood decolorising solution Produced in bi-component stabilizing solution for the discoloration of rough wood surfaces. CHARACTERISTICS AND USE: It is a two-component solution with a decolorizing action. Stabilized solution for the modular decoloration of all untreated woody essences. Does not develop toxic gases. INSTRUCTIONS FOR USE: mix 2 parts of Comp. A with 1 part of Comp. B and shake briefly. The solution thus obtained remains stable for about 8 hours. Do not leave the final unused solution in closed containers but dispose of it by dispersing it in abundant water. Distribute DECO-2 (A + B) on the surface with spray / spray brush / spray (avoid spraying) evenly by thoroughly bathing the wood. The decolorising action is progressive until the material is dry. Repeat if necessary. Eliminate wood scraping using an abrasive retina (eg 100-120). The intensity and end result of decolorization is a function of the type of wood essence and may vary, for the same wood, from element to element (strips, tablets, beams, etc.). It is therefore advisable to perform representative sampling of the finished product. YIELD: For each application, the yield of the A + B solution is about 8-10 sq / lt.

OX FIVE | Soluzione invecchiante per pavimenti in legno
OX-FIVE

Aging solution with controlled action for wood Aged specific product for oak and chestnut, compatible with subsequent paint and oil finishes. CHARACTERISTICS AND USE: aging the wood surface without causing strong and unhealthy inscriptions of wood essences. Non-hazardous product for safe use in all construction site situations. It does not leave residues on the wooden surface. Allows application of any finishing (varnishing, waxing, impregnation). INSTRUCTIONS FOR USE: dispose OX-FIVE on the surface with spray paint / spray (avoid spraying) following the absorption of wood. The aging action is progressive until the material is dry. Eliminate the wood sculpture that is formed after applying OX-FIVE using an abrasive paper or grid (eg Grana 100-120). The intensity and end result of aging is a function of the type of wood essence and may vary, for the same wood, from element to element (strips, tablets, beams, etc.). It is therefore advisable to perform sufficiently representative sampling of the finished product. YIELD: depending on the wood absorption 1 lt / 8-12 sqm.

OX FIVE PLUS -Soluzione Invecchiante forte per Legno
OX FIVE PLUS

Strong aging for wood An aged background product for the strong instability of wood essence. Compatible with the following paint and oil finishes. CHARACTERISTICS AND USE: OX FIVE PLUS is a strong alkaline solution for aging (essence insight) of the wood surface. INSTRUCTIONS FOR USE: Shake before use. Distribute OX-FIVE PLUS onto the surface with spray paint / sprayer (avoid spraying) homogeneously without creating excessive product. Aging action is progressive until the material is dry (6-12 hours). Eliminate the wood sculpture that is formed after the application of OX-FIVE PLUS using an abrasive paper or grid (eg 100-120 grain) The intensity and end result of aging is a function of the type of wood essence and can Vary, for the same wood, from element to element (strips, boards, beams, etc.). It is therefore advisable to perform sufficiently representative sampling of the finished product. YIELD: depending on the absorption of wood 1 lt / 6-12 sqm.

BIOTOP | Finitore antimacchia ed anti-usura per legno oliato
BIOTOP

Water based anti-stain and anti-use Product, resin-waxy emulsion for the finish of wooden surfaces placed indoor. It protects from stains and dirt oil treated wooden surfaces CHARACTERISTICS AND FIELD OF USE: on all types of wooden inside surfaces (floors, coverings, furnitures, structures). INSTRUCTIONS OF USE: shake before use. On floors and on large surfaces: spread BIOTOP with fleece/sponge/soft cloth and distribute a thin and uniform layer of product and avoiding excesses. It's enough, generally, only one coat of BIOTOP. When dry (generally 1-2 hours), polish with a brush in nylon or in tampic or discs in soft plastic fibers. On furnitures, frames, small structures, exc., apply the pèroduct with absorbent cloth or sponge and distribute a thin and uniform layer of the product avoiding excesses. Rinse the equipments with water before the drying of the product. YIELD: Generally 1 lt 30-40 sqm. PACKAGING: 1 lt - 5 lt - 10 lt. VIDEO:

TIROIL | Impregnante oleo-ceroso per legni interni
TIROIL

Oil-wax impervious protective foam for wood Waterproof protective product for the impregnation of wooden surfaces laid out internally. It does not create films or superficial films. Possibility of pigmentation with OILTONER. CHARACTERISTICS AND USE: on all wooden surfaces inside (parquet, coatings, furniture, structures). Forms a strong, non-sticky, easy-to-relieve and long-lasting oily-tough protection. Do not form superficial films. INSTRUCTIONS FOR USE: Shake TIROIL before use. The product is used pure or diluted with AGRUMOIL / DILUOIL. Any dilution is useful for saturating the more compact and oily woods (eg Teak and Iroko), facilitating impregnation. Distribute TIROIL with spatula (on the floor), brush or rag, homogenously wetting the surface following the absorption of wood. After about 30-60 minutes remove excess product from the surface by rubbing it with soft disc (on the floor), soft cloth, soft brush or brush. Wait for drying (12-24 hours) and apply a second coat as above. After drying (at least 24 to 48 hours in good ventilation) or otherwise, as soon as the surface is dry and not oily to the touch, polish with a soft disc. You can achieve pigmentation by adding OILTONER to the desired color version. Do not apply TIROIL to varnish or wood that is not perfectly sanded or cleaned by any trowels. The product, to dry in the required time, needs good ventilation of the premises or slight airflow on the surface. YIELD: On absorbent wood or coarse finish 1 lt / 12-15 mq; On low absorbent wood (teak, iroko) 1 lt / 20-30 mq; On very compact wood 1 lt /> 30 sqm.

OLIO TECNO |Impregnante oleo-ceroso per pavimenti in legno
OLIO TECNO

Solvent based impregnating oil-wax fast drying Impregnating oil product for the waterproof and anti-stain protection of wood placed indoor. It can be pigmented with OILTONER. CHARACTERISTICS AND FIELD OF USE: impregnating oil for waterproof and anti-stain protection of the wood. It forms a resistant, non-sticky protection, easy to keep in the course of time. It does not form superficial films. It does not exfoliate, it does not make layers****** on the surface. Easy to restore without necessity of rubbing the wood. Fast drying (12-24 hours). Ideal for the industrial impregnation with roller of floorings. Dispersion in vegetal and mineral solvents with low environmental impact, and with low tox**** impact on the user. Components that remain as protective in the wood are not toxic. It can easily pigmented with the desired colour version of OILTONER. INSTRUCTIONS OF USE: Shake OLIO TECNO before use. The product can be used pure or diluted with AGRUMOIL or DILUOIL. The eventual dilution is helpful to saturate oily and compact woods (ex. Teak and Iroko) to make the impregnation easier. Always apply two coats of OLIO TECNO. Distribute OLIO TECNO with a fleece/coat wetting the surface homogeneously following the absorption of wood. After about 10-15 minutes remove excesses of product from the surface rubbing with a cloth or a soft disk. After drying (at least 12-24 hours in good ventilation conditions) or anyway when the surface is dry and not oily at touch, apply the second coat as described before. When dry, proceede always to apply the finish BIOTOP. YIELD: approximately 1 lt - 12-30 sqm. PACKAGING: 1 lt - 5 lt. VIDEO:

CAREZZA PLUS - Finitore ceroso concentrato in dispersione cremosa per Legno
CAREZZA PLUS

Wax finishing concentrated paste for wooden surfaces Traditional product polisher for wood with excellent resistance to trampling and dirt. Easily physical characteristics and resettable over time. Characteristics and use: is a waxy dispersion concentrated in a solvent base. On the wood forms a waxy finish glossy, with excellent resistance to trampling, dirt and yellowing. Instructions for Use: it can be easily applied to each surface by means of a brush or cloth. Apply by brush small amounts of CAREZZA PLUS and spread the product uniformly on the floors with single-brush scrubber/polishing machine provided with brushes in Tampico soft, instead on furniture or furniture in general rub with a soft brush or pad in plastics fibers. After drying, polishing the surface with hard or soft woolen cloth. CAREZZA PLUS can be pigmented with OILTONER in version color desired. To fluidify CAREZZA plus in the winter season, heat the canister closed near a radiator or bathroom hot Mary. ù Yield: on woods very rough 1 lt / 12-15 mq; on woods in low absorption 1 lt / 15-20 mq; on woods in polished surface 1 lt / 25-30 sqm beeswax for furniture, parquet

TRAVE-L | Finitore ceroso per travi, soffittature rivestimenti in legno
TRAVE-L

Waxy finisher for beams, ceiling wood paneling Product in liquid wax in solvent easily for wood surfaces can not be walked indoors. Forms a non-sticky gloss wax finish with excellent resistance to aging and dirt. FEATURES AND USE: on all types of wood surfaces not for pedestrian (beams, wooden ceilings, paneling, etc.) Placed inside. On the wood forms a non-sticky gloss wax finish with excellent resistance to aging and dirt. Repolishable and easily restorable in time. Compared to traditional paste waxes, the fluidity of BEAM-L allows easy and fast application also by spraying. It dries quickly (4-6 hours in well ventilated environments). It leaves no unpleasant odor during use and indoor air. BEAM-L can be pigmented with OILTONER the desired color version. INSTRUCTIONS FOR USE: Shake before use BEAM-L. BEAM-L Apply with a spray or brush / brush wetting the surface homogeneously without excess. Just the surface dry, polish with brush or soft pad or warm the surface with hot air to remove any bleaching especially in cold weather. Generally it is sufficient to the application of a BEAM-L hand. Only on very rough wooden surfaces and extremely irregular may be required to apply a second coat. Rinse the equipment with AGRUMOIL / DILUOIL before the product. YIELD: according to the absorbency of the wood.

PROTEGGO MOBILI | Protettivo anti-degrado per arredi giardino in legno
PROTEGGO MOBILI

Protective anti-degradation for wooden garden furniture Produced in waxy protective emulsion for water-repellent treatment of garden furniture. Do not film. Prevents the bulge of the wood. CHARACTERISTICS AND USE: on all types of wood outside. Ideal for protection of tropical wood garden furniture (Ipé, Teak, Iroko, Eucalyptus, Balau, etc.). It forms a "shield" consisting of a protective micro-layer with strong water repellency and weathering resistance. It enlivens the natural color of wood. INSTRUCTIONS FOR USE: Shake before use. Ready to use. On the surface of the clean and dry wood, sprinkle PROTEGGO MOBILI and distribute the product with a sponge by wetting with a thin layer of wood. Only one hand of PROTEGGO MOBILI is sufficient. Dry quickly in 20-30 minutes. No need to polish. Rinse the equipment with water before drying the product. YELD: depending on the surface finish of the material. Indicatively 1 lt / 10-15 sqm.

ORC IMPREGNANTE |Protettivo ibrido oleo-resino-cera per legno esterno
ORC IMPREGNANTE

Hybrid impregnating oil resino-wax-based water for external wood Protection water repellant hybrid is ideal for the treatment of coatings, facilities, fences, doors and windows and exterior floors in wood. Greater resistance to weather compared to traditional oils. Fast application and drying . Characteristics and use: new hybrid system of water-repellent protection with low thickness for the treatment antidegrado of wooden artifacts located outside. Does not create spellicolamenti nor esfoliazioni. The protection obtained with ORC-impregnating material can be easily stored and renewed in time (periodic maintenance) by the application of a new passage of ORC-impregnated outside and without the need for onerous recoveries (es. Discard the wooden surface). Instructions for Use: mix well ORC-impregnated before use. The wood must be clean, well sanded and free of old residual films. The product can be applied with a brush, sponge homogeneously by wetting the surface of the wood. It dries quickly (30-60 min.) and immediately after can be applied to the second coat of the product. In the case that the application of the product takes place the next day or on surfaces are very sunny (where it has already developed the hydrophobic effect), it is advisable to spread the product by wiping the surface with a soft cloth or spandicera fleece to facilitate the unfolding. It is not necessary to abrade between coats, except that to eliminate any sfibrature of wood. Rinse the equipment with water. Yield: in function of the absorption capacity of the wood: on woods little absorbent 1 lt / 10-15 mq; on absorbent timber 1 lt / 7-10 mq.

OLIO41 | Impregnante oleo-ceroso per pavimenti in legno esterni
OLIO 41

Impregnant oleo-waxy for wood floors external Protective product oleo-specific waxy for the protection of wood floors located outside. Penetrates into the porosity of the fibers without creating surface films. Leave unaltered the appearance of natural wood. Easy to maintain, does not require ricarteggiatura of wood. Characteristics and use: applies on all wooden surfaces pre-oiled or rough on the outside (floors, coatings, structures, fencing). Does not form surface films. Instructions for Use: Shake well oil 41 before use. The product uses pure or diluted with AGRUMOIL DILUOIL or. On the pavement, distribute oil 41 with fleece spandicera homogeneously wetting the surface following the absorption capacity of the wood. After about 20-30 minutes remove excesses of product from the surface by wiping with a soft cloth/soft brush. Oil 41 applies in a passage on essences already oily or compact (es. teak, Iroko, Ipè) and in two steps on essences more absorbent. The optional second hand applies as soon as the first is dry (12-24 hours). On surfaces not walkable, apply oil 41 with spandicera fleece, brush or soft cloth wetting homogeneously the surface without leaving excesses. After 20-30 minutes dab excesses uniforming the absorption with soft cloth or by reviewing the surface with a soft brush. Polish with brushes or soft cloth surface after drying (12-24 hours). Oil 41 can be applied also to spray taking care to standardize any excesses. In the case of superficial excesses dried (glossy film) remove them by rubbing the surface with DILUOIL and cloth or soft brush. Yield: on woods little absorbent 1 lt / 12-20 mq; on absorbent timber 1 lt / 6-10 mq; on woods very compact 1 lt / >30 mq.

FLUOIL | Impregnate oleo ceroso per arredi giardino e legni esterni
FLUOIL

Anti-degradable oil-wax impregnating for garden furniture and outdoor wood Specific oil-wax protective product for the protection of window frames and wooden structures in general. It penetrates into the porosity of fibers without creating superficial films. It leaves the natural appearance of wood unchanged. Easy to maneuver, you do not need to recoat the wood. CHARACTERISTICS AND USE: on all wood surfaces placed outside (floorings, garden furniture, coatings, windows, structures, etc.). Ideal for regular maintenance of surfaces already oiled or varnished. Do not form superficial films. It does not create shingles or exhumations. INSTRUCTIONS FOR USE: Shake well FLUOIL before use. The product is pure or diluted with DILUOIL (on compact and little absorbent essences). Apply FLUOIL with a brush by homogenously wetting the wood following its absorption and without leaving any excess. After 20-30 minutes, buffer any unused product surplus by rubbing the surface with a soft cloth / dry brush / soft brush. FLUOIL is applied in a passage on already oily essences (eg teak, Iroko) and in two steps on the most absorbent essences. Any second hand will apply as soon as the first is dry (12-24 hours). To regenerate old paintwork and periodic maintenance, apply small amounts of FLUOIL to the surface by rubbing it with soft cloth or brush to remove any excess. Any excess of dried product can be removed with the DILUOIL diluent or with rage water. You can achieve pigmentation by adding OILTONER to the desired color version. YIELD: On absorbent or coarse wood 1 lt / 12-15 mq; On lightly absorbent wood (teak, iroko) 1 lt / 20-30 mq; On very compact wood 1 lt /> 30 sqm.

OLIO RAVVIVANTE Protettivo Impregnante oleo-ceroso per il recupero dei legni esterni
OLIO RAVVIVANTE

oil-waxy protective agent for recovery of fixtures, furniture and outdoor wood Protective product that enhances color and increases the water repellency of the treated wood or painted on the outside. Remove the fog effect of verinice ruined by fixtures and wooden structures in general. It does not form films or glossy film. FEATURES AND USE: on all wooden surfaces located outside (flooring, patio furniture, siding, windows, structures, etc.). Enhances color and increases the water repellency. Not spellicola or crack. It requires an annual reset on exposed structures. INSTRUCTIONS FOR USE: Shake well before use OIL RAVVIVANTE. Apply RAVVIVANTE OIL on clean and perfectly dry surfaces. To regenerate old paintwork and in the periodic maintenance of the woods already oiled, smooth off with a soft brush small amounts of OIL RAVVIVANTE and rub the surface after 20-30 minutes with a cloth or soft brush to remove any excess. Allow to dry for 12-24 hours. YIELD: according to the absorbency of the wood 1 lt / 15-25 sqm.

 BARRIER | Finitore anti-degrado anti usura per legno esterno
BARRIER

Anti-drip anti-slip protective coating on water base for exterior wood Produced in anti-degradable and anti-dirty protective emulsion based on water for finishing and preserving wood in exterior. It rejuvenates and revives the surface giving it a new shine CHARACTERISTICS AND USE: on all types of exterior wooden surfaces treated with transparent paints, paints and dyes, impregnating, oils (floors, coatings, garden furnishings, structures, etc.). Ideal for revitalizing PVC and varnished aluminum doors. It forms a highly resistant micro-layer that gives the surface of the treated wood greater water repellency and anti-dirt protection. INSTRUCTIONS FOR USE: Shake before use. Ready to use. If necessary, clean the surface by removing dirt with DETER CLEAN. Spread BARRIER with sponge (on smooth surfaces), soft cloth / fleece fleece (on the floor) or brush (on rough surfaces) by wetting the surface with a thin layer and avoiding excesses and dirt. Just one BARRIER hand is enough. Dry quickly in 20-30 minutes. No need to polish. Rinse the equipment with water before drying the product. YIELD: depending on the surface finish of the material 1 lt / 30 - 40 sqm

IDROTONER - Pigmento idro-solubile per PRIMAMANO e BIOTOP. Ver.bianco, nero, giallo, castagno, noce, rosso
IDROTONER

Dispersion pigments hydro-soluble Description: water dispersions of inorganic and organic water-soluble pigments. Fields of application: for enhance products: PRIMAMANO and BIOTOP. Color version: white, red, yellow, sweet chestnut, walnut, black. Benefits: easily dispersible pigments in hydrophilic nature that will produce pigmentation sorbents "transparent" and not very opaque to light stability and weathering. Miscible in any proportion between the different color hues. Instructions for use: add IDROTONER in the product by mixing or stirring vigorously enhance until homogenous pigment dispersion. Use concentrations (expressed in grams of pigment per litre of product) of individual pigments products are the following: -White: up to a max of 60 Gr./lt. Recommended concentration 50 gr/lt -Red, Chestnut and yellow: up to a max of 50 Gr./lt. Recommended concentration 40 gr/lt Walnut: up to a max of 60 Gr./lt. Recommended concentration 50 gr/lt -Black: In all products up to a max of 20 Gr./lt. Recommended concentration 15 gr/lt

OILTONER - Pigmento idro-solubile per i prodotti. Palladium, Tuscania-oil, Ultraton, Tiroil, Olio 41, CArezza plus, Royal wax. Ver.bianco, nero, giallo, castagno, noce, rosso
OILTONER

Pigments in oil-soluble dispersed Description: waste oil-solvent soluble inorganic and organic pigments. Fields of application: for enhance products: ONIX, PALLADIUM, TUSCANIA-OIL, TIROIL, 41 and CARESS OIL PLUS, FLUOIL, TECNO, ROYAL WAX OIL. Color version: white, yellow, red, chestnut, walnut, black. Performance: finisher/fluid-based polishing waxes in dispersion fine with great penetration capacity and coverage of stone surfaces. Its smooth even at low temperatures, allows a quick and easy application without creating backlogs. Forms a waxy water-repellent finish, outstanding resistance to wear and dirt. Jessica quickly. Leaves no unpleasant odours during use and in closed environments. Does not yellow over time and can also be applied on clear or white materials (marble). Product made of organic solvents with low toxic to man and the environment. The dry residue that is non-toxic protection. Can be easily colored with desired color version OILTONER. Can be mixed with OIL or TUSCANIA PALLADIUM to give extra tone colour of the treated material. Directions for use: SHAKE BEFORE USE. Add OILTONER in the product by mixing or stirring vigorously enhance until homogenous pigment dispersion. Use concentrations (expressed in grams of pigment per litre of product) of individual pigments products are as follows: white: recommended only in products up to a max of 150 g/l. Standard concentration 100 gr/lt – Walnut Chestnut-yellow-red: in all products up to a max of 150 g/l. Standard concentration 50 gr/lt black: in all products up to a max of 70 g/l. Standard concentration 20 gr/lt

AGRUMOIL | Pulitore diluente con D-limonene per Legno
AGRUMOIL

Diluent Cleaner with D-Limonene Solvent product for cleaning wooden surfaces. Diluent for oleo-ceramic impregnants. It does not leave any vines on the wood. CHARACTERISTICS AND USE: AGRUMOIL is a solvent mixture in D-LIMONENE for cleaning wood surfaces and not dirty with greasy or soot. Ideal for degreasing surfaces in resinous wood or for removal of surplus waxy impregnated oils applied on all surfaces. Diluent for TIROIL, OIL 41, FLUOIL, TUSCANY OIL; It facilitates their absorption into low-absorbing materials. It does not leave edges and does not stain the wood essence. INSTRUCTIONS FOR USE: Spread AGRUMOIL on the surface and allow it to work for a few minutes. Wipe the surface with a single-spatula / buffer with mesio-hard fiber. Aspirate or remove residues. YIELD: Depending on the consistency of the dirt to be removed or the degree of dilution desired.

DILUOIL - Diluente / Solvente
DILUOIL

Diluent / solvent Non-odorless aliphatic diluent Product for the dilution of solvent-impregnated products CHARACTERISTICS AND USE: specific product for cleaning all wood surfaces and diluting finishes based on resins-oils and waxes. It can also be used on absorbent building materials (terracotta and stones). It does not leave edges and does not stain the wood essence. INSTRUCTIONS FOR USE: spread DILUOIL on the surface and allow it to work for a few minutes. Wipe the surface with a single-spat with a medium hard disk, a pad or a rag. Remove and collect residues. Clean the surface with DILUOIL wetted clean cloth. As a diluent it can be used in all concentrations. YIELD: Depending on the consistency of the dirt to be removed or the degree of dilution required.

SMACCHIO LEGNO - Pulitore per legno invecchiato e smacchiatore del tannino
SMACCHIO LEGNO

Cleaner of aged wood and stain remover of tannin Intensive cleaner product for the removal of ageing's patina (becoming grey) of woods placed outside. It removes stains and halos of tannin. CHARACTERISTICS AND FIELD OF USE: cleaner/renewing of old surfaces and woods in exterior (floorings, sidings, furnitures for gardens, ...). As specific stain remover of tannin on treated (oiled or painted) or rough surfaces in wood indoor.   INSTRUCTIONS OF USE: shake before use. Remove before paints, oils, waxes from wood. Apply the product with plastic sprayers (avoid nebulize the product), brush, sponge, soft cloth. Keep the surface wet for 20–30 minutes; if necessary, reapply the product. Rub the surface with medium hard buffers or nylon brushes. Rinse thoroughly with water and let it dry. Repeat the application if it is necessary. It is very important to wait favourable environmental conditions for optimal drying of wood before to apply any new protection. SMACCHIO LEGNO is not a paint remover or a wax remover and it doesn't remove layers of paints, primers, oils, waxes. YIELD: for the recycling of old wood 1 lt / 6-8 sqm; as stain remover 1 lt / 12-15 sqm. PACKAGING: 1  lt - 5 lt.

SMACCHIO POLVERE | Pulitore smacchiatore per sostanze organiche colorate (vino, frutta, caffè, ecc)
SMACCHIO POLVERE

Stain remover cleaner for colored organic matter (wine, coffee, futta, etc.) Product high effectiveness stain remover for the removal of oxidizable colored spots. It removes stains from stone materials: coffee, wine, juice, food residues typically, blood, urine and tannin. FEATURES AND USE: of Natural Stone, Cotto, Cement, grits, Agglomerates Synthetics, Ceramics. INSTRUCTIONS FOR USE: product to be dissolved in water before use and mix until it forms a paste. Do not use metal containers. Proceed with the application of the product with a spatula or plastic scoop, taking care to leave a layer of 2-3 mm SMACCHIO on the stain to remove. If necessary, the extractive duration of the action can be increased by covering the wrap with a sheet of plastic material (eg. Soft tape or Domopack). Allow to dry the pack prior to its removal Dry with nylon brush or broom. Finally, rinse with plenty of water. Control when removing the stain and repeat the application if necessary. Protect metal surfaces. YIELD: on average with 1 kg of prepared mixture (corresponds to about 300 g of powder) it covers about 1 square meter of surface.

marbecdef2 - Kit di manutenzione pavimenti in legno e parquet impregnati a olio e cera
Kit di manutenzione per legno e parquet oliato

Kit with everything you need for cleaning and maintenance of wooden floors and parquets impregnated with oil and wax. Contains -detergent PULIBRILL 1 lt -1 lt maintenance BIOCARE wax -1 blue Swab to take signs of rubber shoes -1 white Pad to remove dulling of the finish -1 undiluted fleece

marbecdef2 - Kit di manutenzione pavimenti in parquet cerati
Kit di manutenzione per legno e parquet cerato

Kit with everything you need for cleaning and maintenance of wooden floors and parquet floors waxed. Contains -detergent PULIBRILL 1 lt -1 lt maintenance wax VELUX -1 blue Swab to take signs of rubber shoes -1 white Pad to remove dulling of the finish -1 undiluted fleece

marbecdef2 - Kit di manutenzione pavimenti in legno e parquet impregnati a olio e cera
Kit di manutenzione per legno e parquet verniciato

Kit with everything you need for cleaning and maintenance of wooden floors and parquet painted. Contains > -detergent PULIBRILL 1 lt -1 lt maintenance BEAUTY wax FLOOR -1 blue Swab to take signs of rubber shoes -1 white Pad to remove dulling of the finish -1 undiluted fleece