CHOOSE PRODUCT:

Select your product from the list or search for Type


UNIPUL | detergente universale igienizzante concentrato per pavimenti
UNIPUL

 Concentrated sanitizer universal cleaner Product for the ordinary and/or extraordinary cleaning of all hard surfaces, efficacious also at low concentrations of use. CHARACTERISTICS AND FIELD OF APPLICATION: cleaner at universal use, depending on the concentration in the water. It cleans ceramic materials, stones, cotto, cement and synthetic agglomerates, treated wood. Low foaming detergent. It doesn't leave halos on the surfaces and it isn't necessary rinsing. It leaves a pleasant odour in the environments. INSTRUCTIONS OF USE: Pure up to 1:1 part in water: for extraordinary deep cleaning washings on old waxy treatments on cotto and stones. Spread UNIPUL on the floor, leave it act for few minutes and then rub the surface with medium hard pads, remove the residue and rinse with water. Apply subsequently a coat of IDROFIN. Diluted 1: 3-5 parts in water: for washing where is necessary a strong degreasing action on very dirty surfaces. Diluted 1: 30-40 parts in water: for normal dirt in the ordinary cleaning of not treated hard surfaces. Diluted 1: 80-100 parts in water (1/3 glass in 8–10 lt of water): for the ordinary cleaning of treated floor surfaces, polished stones, glazed ceramics, porcelain stoneware, cement agglomerates, cotto, klinker. YIELD: it depends on the concentration of use. PACKAGING: 1 lt - 5 lt - 10 lt. CORRELATED SYSTEMS OF TREATEMENT: System of manutention and protection of the surfaces System of extraordinary cleaning on floors in cotto, stone and agglomerate 

ECOMARBEC | Detergente sgrassante biodegradabile per pavimenti
ECOMARBEC

Eco-friendly detergent degreasing cleaner Product that disintegrates and solubilizes the greasy dirt, sanitizes surfaces in cotto, stone, cement agglomerate, porcelain stoneware and ceramic material in general. Biodegradable. CHARACTERISTICS AND FIELD OF APPLICATION: cleans, degreases, sanitizes surfaces in cotto, stone, cement, porcelain stoneware and other ceramic materials. It can be used pure or diluted in water for hand and machine washings (ex. scrubber, pressure washer). The product solubilizes greasy substances, making them easily removable. The product is biodegradable. It doesn't contain caustic soda, ammonia, fragrances, dyes and solvents. INSTRUCTION OF USE: - Pure or diluted up to 1:2 parts in water: for strong degreasing washings, to remove large greasy dirt residues (cooking oils, lubrificating oils, fats and stubborn dirt residues). – Diluted 1:20-30 parts in water: (1/2 glass of ECOmarbecdef2 in 5 lt of water): for periodic degreasing washings of the floors. – Diluted 1:80-90 parts in water: (1/4 glass in 5 lt of water): for the daily cleaning of treated and washable floor surfaces. YIELD: it depends on the concentration of use.  

GRES LINDO  Detergente concentrato per pavimenti in gres porcellanato
GRES LINDO

Concentrated cleaner for microporous materials like porcelain stoneware, ceramics and stones Product for the ordinary cleaning of coverings and floors of microporous materials. It removes dirt and the becoming grey, also the most stubborn, bringing back the material to its original colour CHARACTERISTICS AND FIELD OF USE: it eliminates quickly the dirt, even the most stubborn, from microporous surfaces like porcelain stoneware, ceramics klinker and stones, where is necessary a fast and easy action of domestic cleaning, leaving a pleasant odour of mint in the environments. It does not leave halos. It brings back the material to its original colour. A continuative use of GRES LINDO keeps joints clean.      INSTRUCTIONS OF USE: Diluted 1:20-30 parts in water (a glass of GRES LINDO in 5 lt of water): for an extraordinary and deep cleaning. Spread the product on the surface with a cloth, mop and let it act for some minutes, and after all rinse all with clean water; Diluted 1:50-60 parts in water (1/2 glass of GRES LINDO in 5 lt of water): for the ordinary cleaning of surfaces in porcelain stoneware, klinker and stones at structurated surface (rough). Diluted 1:80-100 parts in water (1/4 glass of GRES LINDO in 5 lt of water) for the ordinary cleaning of surfaces in porcelain stoneware and polished stones. YIELD: it depends on the concentration of use. PACKAGING: 1 lt - 5 lt.

DETERBRILL | Detergente concentrato brillanatante per pavimenti cerati
DETERBRILL

Concentrated detergent sparkle cleaner for floors in cotto and stone Concentrated neutral product for the ordinary cleaning of surfaces treated with wax. It sanitizes the surface and keeps the brilliance of the treatment during the time CHARACTERISTICS AND FIELD OF APPLICATION: not aggressive concentrated cleaner to clean floorings in cotto, natural stone, cement agglomerate, that have been treated with waxes. It cleans and sanitizes the surface keeping the brilliance of treatment during the time. It leaves a pleasant odour in the environment of lemon and mint. INSTRUCTIONS OF USE:   Diluted 1: 1-4 parts in hot water: to remove considerable dirt, consisting in the periodic cleaning of the treated surfaces.  Diluted 1: 20-30 parts in water (a glass in 8-10 litres of water): for normal dirt in the periodic cleaning of the treated surfaces.  Diluted 1: 50-60 pieces in water (1/3 of glass in 8-10 litres of water): for the daily washing of the floor treated surfaces. YIELD: it depends on the concentration of use. PACKAGING: 1 lt - 5 lt.

FLORA | Detergente neutro per pulizia dei pavimenti di casa
FLORA

Concentrated detergent cleaner for floors Neutral detergent product for the ordinary cleaning of all hard surfaces: it combines the sanitizing function and the degreasing power. Not aggressive for the materials CHARACTERISTICS AND FIELD OF USE: not aggressive concentrated cleaner to clean floors in cotto, glazed ceramic, porcelain stoneware, natural stone, cement agglomerate, treated wood, synthetic surfaces. Low foaming detergent that leaves a pleasant odour of lavender in the environment. It doesn't leave halos on the surface. FLORA combines the detergent/degreaser action with an efficacious sanitizing function. INSTRUCTIONS FOR USE:     – Diluted 1: 2-4 parts in water: to remove considerable dirt in the periodic cleaning of untreated surfaces.     – Diluted 1: 20-30 parts in water (a glass in 8-10 litres of water): for normal dirt in the periodic cleaning of hard untreated surfaces.     – Diluted 1: 50-60 parts in water (1/2 glass in 8-10 litres of water): for the ordinary cleaning of polished stone surfaces, glazed ceramics, porcelain stoneware, klinker.     – Diluted 1: 80-100 parts in water (1/4 glass in 8-10 litres of water): for the ordinary cleaning of treated floor surfaces. YIELD: it depends on the concentration of use.  

REFIX LUCIDO | Cera di manutenzione dei trattamenti su cotto, pietra e agglomerati cementizi
REFIX LUCIDO

Wax glossy maintenance for floors in stone material  Emulsion product resino-glossy waxy which renews and preserves in time treatment of initial finish on surfaces in cotto, natural stone, grits, cement and clinker, without creating surface films CHARACTERISTICS AND USE: on all types of stone material absorbent (cotto, natural stone, grits, cements, klinker) treated with waxs. Renews and preserves in time the protective features and aesthetic characteristics of the initial treatment without determining the phenomena of peel or wax buildup. Constitutes a micro-resino layer-surface waxy easily cleanable and renewable in routine maintenance by reducing the formation of scratches persistent black and the accumulation of dirt. Leaves no unpleasant odours in the premises. For internal use. Instructions for Use: you normally use pure. Shake well before use. Distribute small amounts of REFIX directly on the clean surface or on a soft cloth and spread the product in thin layer uniformly wetting the surface without leaving excesses. Do not ride roughshod during drying. It is not necessary to repolish. Frequency of use - every 1- 2 months: on the surfaces intensely flouted and subject to severe wear (e.g. shops, public spaces, offices, kitchens, bar, restaurants etc.) - every 3 - 6 months: on the surfaces a moderate use (e.g. salt, inputs, bathrooms). - Every 6 - 12 months: on the surfaces to less wear (e.g. night areas, remittances) Yield: indicatively 1lt / 30 -40 square meters.

REFIX MATT | Cera di manutenzione opaca per pavimenti in cotto e pietra
REFIX MATT

Wax opaque maintenance for floors in stone material Emulsion product resino-opaque waxy which renews and preserves in time treatment of initial finish on surfaces in cotto, natural stone, grits, cement and clinker, without creating surface films CHARACTERISTICS AND USE: on all types of stone material absorbent (cotto, natural stone, grits, cements, klinker) treated with waxs. Renews and preserves in time the protective features and aesthetic characteristics of the initial treatment without determining the phenomena of peel or wax buildup. Constitutes a micro-resino layer-surface waxy easily cleanable and renewable in routine maintenance by reducing the formation of scratches persistent black and the accumulation of dirt. Leaves no unpleasant odours in the premises. For internal use. Instructions for Use: you normally use pure. Shake well before use. Distribute small amounts of REFIX directly on the clean surface or on a soft cloth and spread the product in thin layer uniformly wetting the surface without leaving excesses. Do not ride roughshod during drying. It is not necessary to repolish. Frequency of use - every 1- 2 months: on the surfaces intensely flouted and subject to severe wear (e.g. shops, public spaces, offices, kitchens, bar, restaurants etc.) - every 3 - 6 months: on the surfaces a moderate use (e.g. salt, inputs, bathrooms). - Every 6 - 12 months: on the surfaces to less wear (e.g. night areas, remittances) Yield: indicatively 1lt / 30 -40 square meters.

MARBEC - Pulitore per la rimozione di boiacche epossidiche
NOEPOX

Cleaner for the removal of epoxy grout residues Product specific thickened cleaner for the removal of the residues and of epoxy grouts stains on porcelain, ceramic, granite and quartzite. It does not contain CFC. FEATURES AND USE: thickened mixture of organic solvents that do not contain CFCs. On all surfaces in porcelain tile, glazed ceramic tiles, glass mosaics. It can be used to clean up the compact stone materials (eg. Granites, Quartzite, etc.). Can be used both inside and outside, removes hardened residues of the grout on the tile surface without causing corrosion or discoloration of the grout has already hardened escape. Due to its viscosity it can also be used with ease on the vertical surfaces. INSTRUCTIONS: using pure. Wait at least 24 hours after grouting before using NOEPOX. Always apply on a dry surface. Apply the product with a brush or roller on the surface to be cleaned. Always work on limited areas (not more than 30 square meters). Leave for about 30-60 minutes on the dried grout residue, 2-4 hours or more on hardened residues and consistent grout. Then rinse with water (preferably with UNIPUL detergent water solution 1:10) rubbing the surface with a nylon brush or abrasive sponge, moving diagonally across the joints. A floor you can intervene with floor machine with the appropriate discs. Finally, rinse with water again. YIELD: to remove dried residues (after about 1-2 days.), 1 lt / 15-20 sqm; to remove residues of hardened (after 2-3 days.), 1 lt / 10-15 sqm.

DELICACID Detergente disincrostante acido per pietre e materiali lapidei
DELICACID

Decrusting detergent acid for stones and stone materials Cleaning product for cleaning decalcarizzante decrusting and for the removal of cement slurries, efflorescence and calcareous incrustations for stones, agglomerates and ceramic materials in general. Characteristics and use: for washing decalcarizzante of all the stone materials (brick, stone, Klinker, stoneware, grits, slabs, Cement, Palladiane, glazed ceramics resistant to acid). Avoid use on calcareous stones polished, slates (overhead), grits and cementitious agglomerates transparencies. Does not contain hydrochloric acid. Fumiga not and does not develop toxic vapors. Can be used in water cleaners, scrubber-dryers and other equipment for washes of large surfaces. Instructions for use: You can use either pure or diluted in water. Pure: on deposits and calcareous deposits consistent and tenacious. Diluted 1:1-2 in water: for the washings to where it is needed a normal action decrusting decalcarizzante-and neutralization of previous alkaline washings. Diluted 1:3-4 in water: on calcareous stones not polished marble and not polished. Spread DELICACID on the surface and let it act a few minutes. Diluted 1:5-10 in water: for washings after the laying of ceramic tiles. Wipe the surface with pads or discs in plastics fibers or brushes made of nylon, tinex or carborundum; repeat the wash if necessary. Always rinse with plenty of water. Consumption : to remove substantial calcareous residues 1 lt /4-6 sqm; for normal washings 1 lt / 10-15 smq; on ceramic materials 1 lt / 20-40 sqm.

ACIDO HP4 Detergente disincrostante acido per pietre dure contenenti minerali ferrosi
ACIDO HP4

Decrusting detergent acid for hard stones containing ferrous minerals Cleaning product for the removal of efflorescence, cement residue, rust stains and calcareous incrustations on hard stones natural mineral containing ferrous (granites, porphyries , quartzites) CHARACTERISTICS AND USE: cleaner specific acid for the descaling of stone materials resistant to acids and susceptible to yellowing (granite, crystalline schists). Inhibits the oxidation of the ferrous minerals contained in the stone material avoiding the formation of halos and yellow dots. Removes residues of the cementitious, efflorescence and calcareous encrustations. Does not contain hydrochloric acid. Removes halos and small deposits of surface rust from stone materials (terracotta and stone). INSTRIONS FOR USE: You can use either pure or diluted in water. The concentration of use must be determined in each situation in function of the type of soil, by the quantity of residues to be removed and the nature of the material. For this purpose, it may be useful to perform preliminary tests of washing. YIELD: for washings energetic 1 lt / 4-8 sqm; for normal washings 1 lt / 10-15 sqm.

METAL STRIP - Decerante rapido per cere metallizzate su materiali lapidei
METAL STRIP

Quick wax remover cleaner for stone materials Product alkaline wax remover for the quick removal of old layers of synthetic/matallic waxes  and various polymers. It does not contain caustic soda; low foaming. FEATURES AND USE: for stripper-strong sfilmante washing of all stone materials (Cotto, Stone, glazed ceramics, clinker, stoneware, cement, grits, etc.). No need for acid neutralization. It leaves no odor during use and environments; low schiumogeneità. Do not use on wood, linoleum, rubber and PVC. Protect the painted surfaces and anodized aluminum from contact with METAL-STRIP. INSTRUCTIONS: can be used pure or diluted in water. Pure: on thick accumulations of waxes and polymers. Diluted 1: 4.8 in water for washing where a normal wax remover action is necessary. Diluted 1: 15.10 in the water: for periodic washing with scrubbers. Apply the product wetting the surface thoroughly and let it act 5/10 minutes. Proceed for small areas (10-15 square meters). Scrub the surface with pads or discs in plastic fibers. Remove residues of the dewaxing and rinse with water. Do not let dry the old layers of wax dissolved by the stripper. CONSUMPTION: for energetic washes 1 lt / 4-8 sqm; for normal washes 1 lt / 10-15 sqm.   VIDEO

SOLVALL - Pulitore solvente sfilmante per pavimenti e rivestimenti in materiale lapideo
SOLVALL

Solvent cleaner sfilmante for stone materials solvent product to slow evaporation to a deep sfilmante action on stone materials. Leaves no unpleasant odours. Characteristics and use: for washing the dissolver sfilmante on all the stone materials (brick, stone, ceramic, klinker, stoneware, cement, grit, etc.) excluding materials descrambled with polymeric binder and wood. Compared to conventional solvents (e.g. nitro, acetone, turpentine) has a lower rate of evaporation and an action dissolutrice deeper. Leaves no unpleasant odours during use and in environments. Instructions for Use: always use pure. Spread the product on the surface and leave it to act, if possible, at least 15-30 minutes (up to a maximum of 8-12 hours). Wipe the surface with pads or discs in plastics fibers or with brushes made of nylon. Emulsify with water and remove the residue. Protect all painted surfaces and plastic material from contact with SOLVALL. Yield: to remove substantial polymeric residues 1 lt / 4-8 sqm; for normal washings 1 lt / 8-12 mq.

STRIP RESIL |Decerante universale per pavimenti
STRIP RESIL

Stripper universal quick for floors Product for rapid removal of old films of synthetic waxs. Specific for PVC, rubber and linoleum; can also be used on stone materials. Characteristics and use: stripper/universal sfilmante to fast action to remove old layers of metallic wax and various polymers. It is suitable for all floors but thanks to its specific formulation can be used with safety on the resilient materials without affecting the integrity. Does not contain inorganic alkalis. Does not require acid neutralization nor abundant rinse. Low schiumogeneità. Not releasing unpleasant odors during use and in environments. Instructions for Use: You can use either pure or diluted in water, in function of the typology of the dirt to be removed and the cleaning technique adopted. Spread the product thoroughly wetting the surface and let it act 10-15 minutes. Proceed for small areas (10-15 sqm). Wipe the surface with pads or discs in palstiche fibers. Remove the residues of the dewaxing and go with a clean mop; it is not necessary to rinse. Do not leave to dry the old layers of wax dissolved from the stripper. Consumption: it uses indicatively: Pure: on sizeable accumulations of waxs and polymers. Diluted 1: 4/8 in water: for washings to where it is needed a normal action stripper. Diluted 1: 8/12 in water: deceramenti for superficial. Diluted 1: 12/15 in water: for periodic washings with clothes washing and drying machines.

SGRISER | Detergente decerante alcalino solvente forte per materiali lapidei
SGRISER

Detergent alkali stripper solvent strong for stone materials Cleaning product stripper strong degreasing decrusting and stone materials. Removes in depth the old treatments in oil and/or wax on terracotta, stone, concrete, grit, etc. CHARACTERISTICS AND USE: for washing the stripper-degreased strong on all the stone materials (brick, stone, enamelled ceramics, Klinker, stoneware, cement, grit, etc.). You use on the terracotta as preliminary washing to that acid to facilitate the removal of the "dark spots" by sulphation. SGRISER leaves no nor harmful residues in the absorbent material, nor unpleasant odors during use and in environments. Do not use on wood, linoleum, rubber and PVC. Protect the painted surfaces and in anodized aluminum from contact with SGRISER. INSTRUCTIONS FOR USE: You can use either pure or diluted in water. Pure: on sizeable waste oils, waxs, heavy accumulations of dirt and grease organic residues and as descaling agent for the "dark spots". 1:1 diluted in water: for the washings to where it is needed a normal degreasing action/stripper. Spread the product on the surface and leave it to act at least 10 - 20 minutes. Wipe the surface with pads or discs in plastics fibers or with brushes made of nylon; to remove substantial oily residues, can be useful to allow SGRISER dried on the surface. Do not use the equipment in the plant material or animal. Repeat the wash if necessary. The surfaces are resistant to acids, neutralize with acidic aqueous solution. For other more delicate materials, always rinse with plenty of water. CONSUMPTION: for washings energetic 1 lt / 4-8 sqm for normal washings 1 lt / 10-15 sqm.

PULITORE FC | Pulitore per la rimozione dello smog dalle facciate
PULITORE FC

Cleaner for removal of smog facades Product which quickly removes oily substances, fat deposits from air pollution, guano. Easily applicable also on vertical surfaces. Characteristics and use: for the decrusting washing-degreaser strong on all the stone materials (brick, stone, stoneware, cement, etc.). Thanks to its viscosity can be easily applied on vertical surfaces. Instructions for Use: It uses pure. Spread the product on the surface and leave it to act at least 10-20 minutes. Wipe the surface with pads or discs in plastics fibers or with brushes made of nylon. Do not use the equipment in the plant material or animal. Always rinse with plenty of water. On the materials very porous is recommended neutralize CLEANER FC with dilute acid (es. Solution 1:10 Of DELICACID). Protect the painted surfaces and in anodized aluminum from contact with the cleaner FC. Yield: on average 1 lt / 4-8 sqm.

DESOLF 4 - Pulitore desolfatante in polvere per pietre e materiali lapidei
DESOLF 4

Desulphating powder for stone materials Product for removal of calcium sulphate (calcite) screeds on stone materials. CHARACTERISTICS AND USE: for decking on all absorbent stone materials (Cotto, Pietra, Gres, Cement, etc.), even delicate. It dissolves the "dark spots" on the Cotto and the "black crusts" outside on the surfaces of limestone materials in polluted atmospheres. Removes copper oxide residues. INSTRUCTIONS FOR USE: dilute the powder with water and mix until a paste is made (for a medium thick wrap, dilute one part by weight of powder in two parts of water). Do not use metal containers. Apply the product with a spatula or plastic pallet, taking care to leave a 2-3 mm thick layer of DESOLF4 on the stain to be removed. On too absorbent materials, cover the treated surface with a sealant film. Allow the wipe to dry before removing it with nylon brush or sage. Finally rinse with plenty of water. YIELD: On average, 1 kg of prepared dough (corresponding to about 300 grams of powder) covers about 1 square meters of surface.

Detergente intensivo per materiali lapidei microporosi
MICRONET

Intensive detergent for microporous surfaces of stone material Cleaner concentrated inorganic salts. Does not contain strong alkalis. Delete quickly and in depth all the dirt, even the most obstinate, from stone materials microporous, as: porcelain stoneware and ceramic, klinker, stone and agglomerates transparencies or smoothed. Characteristics and use: ideal for clean porcelain stoneware and ceramic, klinker, polished stones or polished, cementitious agglomerates or synthetic. Excellent to clean the grooves between the ceramic tiles blackened by dirt accumulated. Can be used in cleaning methods to machine and by hand. Leaves no marks; low schiumogeneità. Instructions for Use: You can use either pure or diluted in water. Removal of the stains: Use MICRONET pure or diluted 1:1 in water. Pour the product on the spot, wait a few minutes and rub the surface with a sponge or soft cloth. Buffering the residue with dry cloth. Repeat if necessary. It may be useful to rinse with diluted acid solution (DELICACID 2-5% in water). With monobrush scrubber and disc in sponge or cloth: nebulizing MICRONET diluted to 5 - 10% (½ liter / 1 liter in 10 Lt of water) on the surface to be cleaned and then wipe up to the removal of dirt. In the case of dirt particularly stubborn use MICRONET pure or diluted 1:1. On some materials (glossy surfaces or smooth), it may be useful to review the surface with a clean cloth wet. On walls and ceilings: according to the degree of dirt dilute MICRONET 1:1 or pure and drizzle over the surface to be treated. On porous surfaces shiny not you do not need any rinsing, while on the shiny surfaces smooth is necessary ripassarle immediately after with a clean cloth wet). With clothes washing and drying machine: for the daily cleaning of the floorings use MICRONET diluted from 1 to 20% (0.1 lt / 2 lt in 10 Lt of water). Do not use on surfaces treated with the polymeric waxs. Yield: as a function of the concentration of use.

IDROWIP | Protettivo idrorepellente per pavimenti in cotto, pietra e cemento
IDROWIP

Water-repellent protective for stone materials on the basis of water Produced for the anti-humidity of rising for terracotta and stone with high absorption laid on the inside and the outside. Specific for the pre-protection of materials before laying them or plugging of the joints. Characteristics and use: on cooked, Brick, natural stone with a high absorption, Cement, mineral plaster inside and outside. Specific for the pre-protection of materials before laying them or plugging of the joints. Does not significantly alter the appearance and the color tone of the material. Does not form surface films. Instructions for Use: Shake before use. Can be applied by spraying, fleece, brush with cloth or sponge uniformly wetting the surface to be treated and following the absorption of the material. Blot any excess during the drying stage. Normally dries in 4 - 8 hours depending on the ventilation. Applies to saturation in: 1 pure hand - on materials with a medium-high absorption in inside; 2 pure hands - on materials with a high absorption (e.g. clear terracotta, stone very absorbing) and with considerable humidity rising in inside and on all the materials placed outside. The application of the second hand must be carried out as soon as the first was absorbed or dry. To avoid that the surfaces just treated are wet from rain before 12 hours. Do not apply on surfaces too hot. Yield: on material little absorbent 1 lt / 8-15 mq; on material very absorbent 1 lt / 4-8 sqm.

IDROTON - Protettivo idrorepellente tonalizzante per materaili lapidei coem : cotto, pietra e cemento
IDROTON

Water-repellent protective wet effect for stone materials on the basis of water produced for the anti-degradation to tonalizzante effect of stone materials in the medium-high absorption laid on the inside and the outside. Characteristics and use: on all types of stone materials in the medium - high absorption (stone, terracotta, grit, etc.). Specific for all stones with surface machining coarse sand blasted, scratched, flaming, tumbled, honed, etc.). For interior and exterior. Leaves no surface films. Instructions for Use: Shake before use. Spread IDROTON with spandicera fleece, soft cloth, sponge homogeneously wetting the surface. During drying, blot any excess before drying. In the case of excess dried on the surface and remove them by polishing with hard red or white with single-brush scrubber or rehearsing a cloth moistened with IDROTON on the material. Just dry (1 - 2 hours) apply the second hand (where necessary) proceeding in the same manner as for the first. To avoid that the surfaces just treated are wet from rain before 8-12 hours from the application. Do not apply on surfaces exposed to the sun or too hot (application temperature 5°- 30°C). Yield: Normally 1 lt / 6-15 mq.

TIM Protettivo idro-oleorepellente per materiali lapidei assorbenti
TIM

Protective water repellent and anti-stain water-based absorbing stone materials Product for the ski anti-moisture and anti-stain treatment for terracotta, natural stone and cement mixtures with high absorption in interior and exterior. Transparent and leaves no surface film. FEATURES AND USE: on all kinds of medium-high absorption stone materials, such as stone, brick, cast stone, concrete, mineral plasters. For indoor and outdoor. Leaves no surface film. INSTRUCTIONS FOR USE: Shake before use. Spread TIM spreader fleece, soft cloth, sponge wetting the surface homogeneously. Dab any excess during the drying stage prior to drying. Normally it dries in 4 - 8 hours, in dell'areazione function. It applies to saturation: 1 Pure hand - of materials in the medium to high absorption in interior; 2 pure hands - on high absorption materials (eg. Clear terracotta, highly absorbent stones) and consistent with rising damp in the interior and on all materials placed outside. Avoid that surfaces just treated are wet from the rain before 8-12 hours from application. Do not apply on hot surfaces (> 30 ° C). YIELD: on medium-absorbing material 1 lt / 8-12 m² on very absorbent material 1 lt / 4-8 sqm

SILOX 6 | Impregnante protettivo anti-umidità di risalita per pavimenti, rivestimenti e pareti
SILOX 6

Water-repellent protective for stone materials produced for the protection of the antidegrado terracotta, stone and cement in the inside and the outside. Characteristics and use: on all the stone materials absorbing (terracotta, stone, marble, granite, cement agglomerates, etc.) laid in interior and exterior. Does not change the appearance and the color of the material, does not form the surface film. Instructions for Use: Use only on surfaces perfectly dry. Apply by spraying, fleece, brush or with a soft cloth uniformly wetting the surface to be treated until saturation following absorption. Dab well any excesses and drippings during the drying stage. The application of any second hand must be carried out ("wet on wet") as soon as the first is dry on the surface. Protect or prevent the surfaces just treated are wet from rain before 8-12 hours from the application. Do not apply on surfaces too hot (> 30°C). Yield:  on marbles, granites and other materials little absorbent 1 lt / 15-20 mq; on stone, terracotta "Tuscan type", cements 1 lt / 10-15 mq; on plasters, terracotta and stone highly absorbent 1 lt / 4-8 sqm.

TON 25 | Protettivo anti umidità di risalita , antimacchia per pietra, cotto e cemento
TON 25

Protective water and oil repellent in water-based toning for absorbent stone materials Product for stain protection against deterioration of stone, terracotta and absorbent cement agglomerates laid in interior and exterior. It intensifies the color of the material, does not create films and leaves a natural appearance to the material. FEATURES AND USE: on all types of absorbent stones (natural stones, Cotto, grits, etc.). Specific for all the stones with coarse surface processing (sandblasted, scratched, flamed, tumbled, polished, etc.). For indoor and outdoor. Leaves no surface film. INSTRUCTIONS FOR USE: Shake before use. Spread TON 25 with spreader fleece, soft cloth, sponge wetting the surface homogeneously. During drying dab any excess before drying. You need 1-2 steps depending on the absorption of the material. In the case of dried and excesses on the surface, remove them by rubbing with red or white disc with single-brush or rehearsing a moistened cloth TON 25 on the material. Just dry (1-2 hours) apply a second coat (where necessary) proceeding as for the first. Do not use on hot surfaces (> 30 ° C). YIELD: on medium-absorbing material 1 lt / 8-12 square meters; on very absorbent material 1 lt / 4-8 m².

ACTIV 3 | Protettivo antiumidità di risalita e antimacchia per pavimenti e rivestimenti in pietra, cotto, e cemento a superficie poco assorbente
ACTIV 3

Protective water-oil repellent for stone materials Specific product for stone, brick, concrete and stone materaili typically compact and not very absorbent routed inside and outside. Does not change the color and appearance of the material and not form films. FEATURES AND USE: on all low absorbent stone materials and polished or smooth surface with absorbent (eg. Diorite, Cardoso, fine-grained calcareous stones, Cotto) laid in interior and exterior. Does not change the appearance and color of the material. Not supeficiale film form. INSTRUCTIONS FOR USE: The product is used pure and dry surfaces in: 1 hand on compact shiny materials (marble and granite); 2 hands of more absorbent materials. It is applied by spray or brush (on small surfaces), distributing it evenly over the surface to create a "veil" wet. Do not rub and avoid foaming. During the drying stage, to remove excesses of product rilucidando the surface with a cloth or soft disk moistened ACTIV 3. Normally ACTIV3 dries in 3 - 4 hours in dell'areazione function. The application of the second coat should be performed as soon as the first is dry on the surface. Do not use on hot surfaces (> 30 ° C). YIELD: on marble, granite and other low absorbent materials 1 lt / 15-30 sqm; on absorbent stones and cooked 1 lt / 8-15 sqm.

EXCEL PLUS | Protettivo antimacchia per materaili lapdie assorbenti
EXCEL PLUS

Protective oil repellent in water-based absorbent stone materials Product for the stain protection of absorbent stone materials in interior and exterior. It forms an invisible protection. FEATURES AND USE: on all kinds of brick, stone and concrete with high absorption placed inside and outside the outer. It does not significantly alter the appearance and behavior of the material color tone. It forms an invisible protection. INSTRUCTIONS: Shake before use. It can be applied by spraying, with spreader fleece, with a brush, with soft cloth or sponge as needed, uniformly wetting the surface to be treated. Dab any excess during the drying phase. Normally it dries in 1-2 hours. On very absorbent materials it may be necessary to apply two coats of product. YIELD: Normally 1 lt / 6-10 sqm.

LITOFLON | Protettivo anti-umidità di risalita antimacchia per pietre assorbenti
LITOFLON

Fluorinated waterproof anti-stain agent for absorbent stones Specific impregnating product for middle-high absorbing stones laid inside. CHARACTERISTICS AND USE: on all types of medium-high intensity absorbent stones (sandstones, limestone, tufts, etc.) with rough surface finishes (bushy, spotted, scratched, flamed, etc.). Do not form superficial films. It forms an invisible shield. LITOFLON can not avoid acid corrosion of the materials. I NSTRUCTIONS FOR USE: Shake before use. Spread LITOFLON with a spatula, soft cloth, sponge or brush, homogenously wetting the surface after absorbing the material and buffering excessive excess before laying. Any excess of dried product should be removed by rewetting a lacquered LITOFLON cloth on the surface. As soon as it is dry (1-2 hours), apply the second coat as for the first one. Avoid washing the surfaces treated with LITOFLON using alcohol. Do not spray. YIELD: The yield is as follows: On absorbent stones (eg sand) 1 lt / 8-12 m²; On very absorbent stones (eg tuff) 1 lt / 4-8 mq.

GUARD | Trattamento antimacchia per pavimenti in granito, marmo e pietra compatta
GUARD

Protective stain pad for marble, granite, blended and low absorbent granules Water-based stain-resistant impregnating product for polished / honed compacted stones. It forms an invisible shield. CHARACTERISTICS AND USE: For all types of compact stones (Marble, Granite, Travertine, Graniglia, etc.), honed or polished inside. Does not significantly alter the appearance and color tone of the material. Do not form superficial films. It forms an invisible shield. The product can not avoid acid corrosion of the materials. INSTRUCTIONS FOR USE: Shake before use. Apply GUARD with spatula fleece, soft cloth, sponge, evenly wetting the surface. During drying, buffer any excess before drying. In the case of excesses dried on the surface, remove them by wiping a wet cloth of GUARD on the material. Avoid washing surfaces treated with GUARD using alcohol. YIELD: Approximately 1 lt / 20 sqm.

ANTISTIAN
ANTISTAIN

Protective fluorinated oil repellent for stone materials Impregnating product antistain/antigraffiti for universal use on any type of stone material placed in the inside and the outside. Characteristics and use: on all the stone materials absorbents such as terracotta, stone, cement agglomerate, ceramic flooring and wall coating in the inside and the outside. Facilitates the cleaning up of the absorbent material from dirt and stains. Does not alter the appearance and the color tone of the material. Does not form surface films and form an invisible protection. Instructions for Use: Ready to use. Apply the product on dry surfaces. ANTISTAIN applies to spray or brush (on small surfaces), distributing it evenly on the surface up to create a "veil" wet. Blot any excess during the drying stage. Do not rub decidedly in order to avoid the formation of foam. Any excess product after drying must be removed massaging with a cloth moistened with ANTISTAIN the surface. Normally dries in 1-2 hours in function of aeration. Yield:  - on marbles, granites, klinker and other materials little absorbent 1 lt / 15-20 mq; - on cooked,stones, grits, cements and other absorbent materials 1 lt 6-10 mq.

ULTRATON - Impregnante tonalizzante per pietre
ULTRATON

Protective for absorbent stones with wet effect Product for the "wet effect" stain treatment of middle-high absorption stones. Do not create movies. CHARACTERISTICS AND USE: on Natural stones with coarse surface machining (eg pebbled, sandblasted, hammered, antique). Saturate the porosity of the stone material without leaving superficial polymer films. It can be used both inside and outside. INSTRUCTIONS FOR USE: Shake before use. Apply only on dry surfaces. Distribute ULTRATON with brush / cloth, homogenously wetting the surface and absorbing the material. After 5-10 minutes, buffer any excess of product not absorbed with soft cloth or disc. ULTRATON is dried after 8-12 hours. On the very absorbent materials it may be necessary to apply two coats of product. Do not apply the product to areas exposed to sun and too hot. YIELD: On roughly worked and absorbent stones 1 lt / 8-12 sqm; On marbles and pebbles 1 lt / 15-20 sqm.

BRIGHTSTONE - Protettivo Impregnante antimacchia tonallizante per marmi e pietre a basso assorbimento
BRIGHTSTONE

Impregnant compact stones with wet effect protective Product stain resistant to treatment to "wet effect" of marbles and stones to low absorption. Does not create films. Characteristics and use: on all the stony surfaces inside and outside. Specific for stones at low absorption (Slate, Granite, porphyry, marble, etc.) and grits. Does not form surface films. Do not browse nor spellicolamenti creates. Can be used both inside and out. Instructions for Use: Shake BRIGHTSTONE before use. Distribute BRIGHTSTONE with spandicera fleece/soft cloth/brush homogeneously by wetting the surface following the absorption of the stone. After about 10-15 minutes to remove any excess product from the surface by wiping with a cloth or soft disc. Dried after 6-8 hours. On the materials highly absorbent may be necessary to apply two coats of the product. Do not apply BRIGHTSTONE on surfaces exposed to the sun and too hot. Can be pigmented with OILTONER. Yield:  on absorbent stones or coarse finish 1 lt / 8-15 mq; on compact stones 1 lt / 15-30 sqm.

BRIGNTSTONE NERO | Impregnante tonalizzante correttivo per l'ardesia nera
BRIGHTSTONE NERO

Black impregnation for slate and black stones Protective black-impregnating anti-stain product for color correction of whitewashed stones and black slates. Do not create films. CHARACTERISTICS AND USE: Specific for black slate (Blackboard) and other black marbles for indoor and outdoor use. Protective black stain inhibitor specific for color correction of black slates whitened by acid solutions or degradation due to weathering agents. It forms a strong, non-sticky, easy-to-re-seal and time-wicking oil-wax protection. Do not form superficial films. Do not spit or create shingles. INSTRUCTIONS FOR USE: Shake BRIGHTSTONE BLACK before use. Apply only on dry surfaces. Distribute BRIGHTSTONE NERO with fleece fleece / soft cloth / brush, homogenously wetting the surface following the absorption of the stone. After about 10-15 minutes, remove any excess product from the surface by rubbing it with a soft cloth or disc. Dry after 6-8 hours. On the very absorbent materials it may be necessary to apply two coats of product. Do not apply BRIGHTSTONE BLACK to exposed surfaces and too hot. YIELD: depending on the absorption of slate: on average, 1 lt / 15-30 mq.

PALLADIUM | Impregnante protettivo oleo-ceroso tonalizzante per cotto e pietre
PALLADIUM

Protective oleo-waxy with wet effect for terracotta and stone Product for finishing stain release and to wear of brick and stone sanitary cutlery inside. Enhances the color of the material without causing yellowing. Characteristics and use: for stone surfaces (excluding those polished), cotto and cement agglomerates. Physical characteristics. It does not form the surface film. For internal use. Instructions for Use: Shake before use. Distribute palladium with spray or brush homogeneously wetting the surface following the absorption of the material. After drying (at least 6-10 hours under conditions of good aeration) or in any case as soon as the surface is dry to touch, polish with soft cloth or with soft brush, or apply a second coat by completing the saturation of the material and polish after drying. Yield: -On compact stones 1 lt / 15-25 mq; -cooked on a low absorption 1 lt / 10-12 mq; - on absorbent stones or with rough surface and terracotta high absorption 1 lt / 6-10 mq.

OIL WET |Trattamento impregnante ad effetto bagnato per materiali lapidei
OIL WET

Impregnating wet effect for stone materials Protective low viscosity concentrate impregnating and solvent-free impregnating agent to give the wet effect to absorbent stone materials. It can be used on stones, marbles, granites, granules, synthetic agglomerates, terracotta and cement artifacts, both inside and outside. CHARACTERISTICS AND USE: hydro-oil-repellent and toning impregnating agent for performing "strong wet" treatments on absorbent materials. Saturate the porosity of the stone material without leaving superficial polymer films. The protection retains significant vapor permeability and does not spit or spell. Odorless product. A stable UV product. Resistant to atmospheric agents and microorganisms (algae, molds, etc.). Due to its low viscosity and moderate drying speed it is easy to apply on any substrate. OIL-WET forms permanent and non-reversible protection on the material. It is always advisable to carry out preliminary tests on the off-work material. INSTRUCTIONS FOR USE: apply only on surfaces perfectly dry and clean by dirt, oils and greases and residues of previous treatments. The product can be used as it may or may be diluted up to 1: 1 with DILUOIL. Distribute OIL-WET with a brush / soft cloth / sponge / spool (depending on the support) by homogenously wetting the surface and absorbing the material. After 10-15 minutes, buffer any excess product that is not absorbed by rubbing the surface with a soft cloth or disc. Wait at least 30 minutes before applying a subsequent product step. Normally OIL-WET is applied in 1-2 hands depending on the absorption of the support. Only on very absorbent and rough materials may be necessary to apply a third hand. OIL-WET Dries after 24 hours. The product accepts any finishing products (IDROFIN, LUXOR, PAV-05, etc.) YIELD: - on very rough and absorbent materials 1 lt / 8-12 sqm - smooth and slightly absorbent materials 1 lt /> 20 sqm

UNICO | Prodotto per il trattamento antimacchia e antisporco per pavimenti in cotto e pietra. Ideale per il fai da te
UNICO

Stain-resistant, anti-dirt for stone materials Water based resin-wax emulsion ideal for the DIY treatment of absorbent stone materials inside. CHARACTERISTICS AND USE: Shiny resin-ceramic emulsion for the treatment of interior stone materials with excellent sealing and stain resistance, anti-dirt and anti-wear properties. It leaves the material good vapor permeability. Can be used on all types of terracotta, natural stones, cements, granules, synthetic agglomerates (floor and lining) laid out internally. Not suitable for the treatment of polished surfaces (eg marble, granite) and ceramic materials (eg porcelain stoneware). INSTRUCTIONS FOR USE: Usually it is used pure on dry material. Shake ONLY before use. Types of application: 3-4 hands as a unique treatment product. The product is distributed with a spatula, cloth or sponge. It should be laid in thin layer by homogenously wetting the surface and without making excess. Apply the following hands as soon as the previous one is dry. UNICO Dries quickly, generally in 2-3 hours in well-ventilated environments. YIELD: generally 1 lt / 6-10 sqm.

PRIMAMANO NEUTRA - Primer protettivo anti-spolvero in base acqua per cotto e cemento
PRIMAMANO NEUTRA

Leveling anti-dust protection for stone materials Product resin-wax emulsion for the treatment of leveling down of terracotta materials, stone and concrete laid inside. Wicks the material and eliminates dusting. FEATURES AND USE: on all kinds of medium-high absorption stone materials with as stones, Cotto, cement, mineral plasters. As absorption leveling down and stain in wax treatments. Specifically as anti-dusting protection and surface riaggregante for decoesi materials. For indoor. INSTRUCTIONS: using pure or diluted in water. Apply with fleece applicator (floor), soft cloth, sponge, brush (very rough surfaces only). It should be spread in a thin layer wetting the surface homogeneously and without excesses. It dries quickly, usually in 1-2 hours. On difficult surfaces wettability (ie. Above the water-repellent or stain protection) rub the product on the surface facilitating even application. YIELD: as a provision of cooked very absorbent 1 lt / 6-10 square meters; as dusting 1 lt / 8-15 sqm.

PRIMAMANO RAVVIVANTE - Primer protettivo anti-spolvero in base acqua per cotto e cemento
PRIMAMANO RAVVIVANTE

Anti-dusting protective leveler for stone materials Resin-ceramic emulsion product for high-adhesion base material. Reassemble dusty surfaces avoiding dusting. It tones the surface without altering its color. It does not contain solvents. For inside. CHARACTERISTICS AND USE: on all types of medium-high absorption stone materials such as Stones, Cotto, Cement, Mineral Plasters. As a smoothing absorbing base and stain-resistant in waxy treatments. Specific as anti-dump and replenishing surface protection for decoese materials. For inside. INSTRUCTIONS FOR USE: Use pure or diluted in water. Applies with spool (floor) fleece, soft cloth, sponge, brush (only on very rough surfaces). PRIMAMANO RAVVIVANTE should be laid in thin layer by homogenously wetting the surface and without making excess. Dry quickly, generally in 1-2 hours. On surfaces that are difficult to wet (eg on water repellent or stain resistant), rub the product onto the surface, making it evenly worn. YIELD: As a base on cooks very absorbent 1 lt / 6-10 sqm; As anti-dust 1 lt / 8-15 mq.

ONIX ! Finitore ceroso concentrato per materiali lapidei assorbenti a superficie ruvida
ONIX

Wax finishing concentrate for stone materials absorbing a rough surface Product protective cream in solvent based waxs in fine dispersion for the waxy finishing of terracotta and stone laid inside. Practical Application, it dries quickly and has a strong water repellency. Characteristics and use: on all types of natural and artificial stone materials absorbing (cooked, terracottas, absorbent stones, etc.) inside. Its fluidity, even at low temperatures, allows an easy and quick application without creating accumulations. Instructions for Use: Shake or mix ONIX before use. On the pavement, spread ONIX with brush/flat brush or sprayer on limited areas and distribute the wax immediately in a homogeneous manner with single-brush scrubber provided with brushes in Tampico soft, avoiding excesses. After drying (usually 4-8 hours), lucidarla with soft disc/nylon brush. Generally it is sufficient for the application of a coat of ONIX. ONIX can be pigmented with OILTONER mixing until the complete and homogeneous dispersion of the pigment. Yield:  on materials with high absorption and rough surfaces 1 lt / 12-20 mq; on materials in the medium absorption 1 lt / 20-30 sqm.

IDROFIN MATT -Finitore  anti-sporco anti-macchia per il trattamento del cotto, pietra e cemento
IDROFIN MATT

Finishing stain and dirt for stone materials Product in resin-wax emulsion with matt effect for the final treatment of terracotta materials, stones and cement laid inside. Wicks the material, facilitates routine cleaning. FEATURES AND USE: on all types of absorbent stone material (brick, natural stone, cast stone, cement, clinker). For internal use. INSTRUCTIONS: normally uses pure. Shake well before use. Application types: 1 hand on wax dispersions; 2 hands in a thin layer on the protective stain impregnating. The product is distributed by spreader fleece, cloth or sponge. It should be spread in a thin layer wetting the surface homogeneously and without excesses. Apply the second coat as soon as the first is dry. IDROFIN can also be distributed with the technique "spray-buffing" with a single brush (max speed 400 revolutions / min.) Fitted with a medium hardness disc, in particular on the smooth surfaces. It dries quickly, usually in 2-3 hours in well-ventilated areas. YIELD: on rough surface materials 1 lt / 10 -18 m; on smooth surface materials 1 lt / 20-30 sqm.

IDROFIN LUCIDO -Finitore anti-sporco anti-macchia in base acqua per pavimenti in cotto, pietra e cemento
IDROFIN LUCIDO

Anti-stain and anti-dirt finisher for lapdei materials Product resin-wax emulsion with glossy effect for the final treatment of terracotta materials, stone and concrete laid in inside. Wicks the material, facilitates routine maintenance. FEATURES AND USE: on all types of absorbent stone material (brick, natural stone, cast stone, cement, clinker). For internal use. INSTRUCTIONS: normally uses pure. Shake well before use. Application types: 1 hand on wax dispersions; 2 hands in a thin layer on the protective stain impregnating. The product is distributed by spreader fleece, cloth or sponge. It should be spread in a thin layer wetting the surface homogeneously and without excesses. Apply the second coat as soon as the first is dry. IDROFIN POLISHED can also be distributed with the technique "spray-buffing" with a single brush (max speed 400 revolutions / min.) Fitted with a medium hardness disc, in particular on the smooth surfaces. It dries quickly, usually in 2-3 hours in well-ventilated areas. YIELD: on rough surface materials 1 lt / 10 -18 m; on smooth surface materials 1 lt / 20-30 sqm.

POLIFIN | Finitore anti-sporco anti-usura per pavimenti in materiale lapideo
POLIFIN

Waterproof and anti-wear finisher for stone materials Produced in high gloss resistant resinous emulsion. Particularly suitable for finishing smooth surface materials. CHARACTERISTICS AND USE: on all types of interior stone materials (cooked, natural stones, granules, cements, clinkers) especially on polished or polished finishes. Also suitable for resilient materials (PVC, Linoleum). INSTRUCTIONS FOR USE: Usually it is used pure. Shake before using. The product is distributed with a spatula, cloth or sponge. It should be laid in thin layer by homogenously wetting the surface and without making excess. Apply the second coat as soon as the first is dry. POLIFIN can also be distributed with a spray-buffing technique with a single-disc brush (speed up to 400 rpm) with medium hardness disk, especially on polished surfaces. Dry quickly, generally in 2-3 hours in well-ventilated environments. YIELD: - On rough surface materials 1 lt / 15-18 mq; - On smooth surface materials 1 lt / 25-50 sqm.

LUXOR | Finitore cereso anti usura per graniti, marmi, graniglie
LUXOR

Wear-resistant finisher to Granites, marbles and grits Product in liquid wax dispersion in solvent for finishing smooth and compact absorbent materials. No bleaching or yellowing over time. Easy to maintain. Characteristics and use: out of marble, granite, stones compact (es. Slate, compact limestone) and grits cutlery inside. Specific for stone materials with smooth surface finishes (polished, smoothed). It does not form a surface film. Instrutions for use: in the initial treatment pour/spray small amounts of LUXOR on the surface wetting it evenly. DAB during drying any excess product. Polish with a soft cloth, swab or drive the surface as soon as dry (15-30 minutes). Maintenance spray small amounts of LUXOR on the surface and rub it with a single brush with a soft disc or with a soft cloth until the drying of the product. Yield: out of marble, granite and grits lucidate1 lt/> 40 sqm; Compact stones smoothed 1 lt/30-40 sqm. 

WET OUT | Impregnante con effetto bagnato per pavimenti in cotto e pietra esterni
WET OUT

Impregnant oleo-waxy for wet effect for stone materials outside Impregnating product water repellent and stain resistant to treatment to wet effect of surfaces in terracotta and stone placed outside CHARACTERISTICS AND USE: water-repellent impregnating and stain resistant oleo-waxy for the treatment for wet effect of surfaces in terracotta and stone placed outside. The presence of fluorinated components in the product ensures a high resistance to atmospheric agents. Saturates the porosity of the material without leaving a thick and rigid surface films; does not create spellicolamenti. Dries more rapidly than the cooked linseed oil without creating tone differences. The product can be easily restored in time through the application of a new step of wet out and without the need for onerous recoveries. Instructions for Use: Shake wet out before use. Apply only on dry surfaces. Dilute with AGRUMOIL DILUOIL or. On materials with a high absorption are necessary 2 steps of impregnating saturarne for porosity. Distribute wet out with spandicera fleece or brush uniformly wetting the surface following the absorption of the material. After 30-60 minutes uniform absorption of wet out by removing the excess of product from the surface by wiping with a cloth or soft brush. After drying (at least 4-6 hours) apply a second coat by operating as above. Finally, polish with soft cloth or with soft brush just dry (generally 12-24 hours). Can be pigmented with OILTONER. Yield: On Tuscan terracotta 1 lt / 12-18 mq; on clear terracotta or stone highly absorbent 1 lt / 5-10 mq.

PAV 05 | Finitura protettiva anti-vegetativa per pavimenti in cotto, pietra e cemento esterni
PAV05

Anti-vegetative protective finish for external stone materials Product emulsion resin-wax resistant to atmospheric agents for the baked finish, stone, concrete conglomerates, laid outdoors. FEATURES AND USE: on absorbent stone materials (Cotto, Stone, Concrete) placed outside. It promotes the cleanability of the floorings exposed to the outside. It drastically reduces the growth of algae on surfaces. Always use a primer on water and oil repellent (eg. TIM-TON 25-IDROTON). INSTRUCTIONS: it is used pure or diluted in water. Apply with fleece applicator (floor), soft cloth, sponge, brush (very rough surfaces only). It should be spread in a thin layer wetting the surface homogeneously and without excesses. It dries quickly, usually in 1-2 hours. In general, it is sufficient only one hand; on materials with very rough surfaces it can be useful to a second passage. Protect or avoid that the surfaces are treated just wet from rain before 6-8 hours after application. Do not apply on hot surfaces in the hours in strong sunlight, on a windy day, or at temperatures below 5 ° C. YIELD: indicatively with 1 lt / 8-14 sqm.

GRIPPER | Trattamento antiscivolo per pavimenti
GRIPPER

Anti-slip treatment for floors Produced for non-slip treatment of all materials containing silicates (such as granites, porcelain stoneware, enamelled ceramics, etc.) inside and outside. It is on the surface of the material a microporosity that dramatically reduces the slippage of the wet surface. CHARACTERISTICS AND USE: for all materials containing silicates (granites, porcelain stoneware, glazed ceramics, etc.) inside and outside. It makes non-slip glossy and dense flooring for their slippery when wet. The brightness and color of the treated surfaces can also undergo significant variations. INSTRUCTIONS FOR USE: ready to use product. Remove any protective layers (waxes, polymers, impregnants). Apply homogenously the surface by spreading GRIPPER with sponge, veil, mop. Proceed on well-defined pavement areas (eg break through the joints) avoiding partial and double overlapping. The reaction time of the product depends on the desired effect and the type of material (generally 10-15 minutes). During this time the product should not dry. After the reaction time has elapsed, GRIPPER is neutralized with a SGRISER 1:10 solution (1 L of SGRISER in 10 L of water). Finally, rinse with plenty of water. YIELD: Approximately 10-20 sqm / lt.

ACQUABLOCK | Protettivo consolidante anti-infiltrazioni per pavimenti e rivestimenti in materiale lapideo
ACQUABLOCK

Consolidating, anti-infiltration for stone materials Product that penetrates into the material and forms an invisible chemical barrier, drastically reduces water absorption capacity and eliminates infiltration from cracks. Ideal for waterproofing joints. Do not film. CHARACTERISTICS AND USE: on all absorbent stone materials (Terracotta, Stones, Cement, Clinker and Stoneware, etc.). Ideal for waterproofing floor joints in the outside. It water-repels the surface and restores the original cohesion of decoese materials. ACQUABLOCK eliminates water infiltration from artifacts caused by cracks and cracks up to 1.5 mm wide. It has excellent resistance to aging. It does not yellow. INSTRUCTIONS FOR USE: The product is used pure on dry and clean material. Apply by spray or brush by uniformly wetting the surface to be treated until saturation, following absorption. Insist on joints and cracks. After 5-10 minutes completely remove the product not absorbed by the material, rubbing the surface with a soft cloth or absorbent paper. The application of any second hand must be carried out ("wet on wet") as soon as the first is dry on the surface. ACQUABLOCK dries in 6-8 hours. Protect or prevent the newly treated surfaces from being wet by rain before 24 hours of application. YIELD: On stones, cooked "Toscano type", cements 1 lt / 10-15 sqm; On plaster, plaster and very absorbent stones 1 lt / 4-8 sqm.

RE-BLOCK | Consolidante per materiali lapide
RE-BLOCK

Consolidant for stone materials in a solvent base Description: consolidating solvent solution of ethyl silicate. Fields of application: for all materials of natural stone laid in Interior and exterior. Can also be used on other stone materials absorbents (e.g. plaster, stucco, terracotta). Performance: penetrates and spreads to capillarit inside the absorbent material. Thanks to the reaction of ethyl silicate and water of atmospheric humidity will form a silica gel that hardening gives greater mechanical resistance of the material. The transformation and hardening of silica gel is accomplished in approximately 15 days at 20 C and 50% RH For these characteristics ideal for consolidating REBLOCK decoesionate stones from weathering and restoration plasters precious murals. REBLOCK does not contain hydrophobic additives. Instructions for use: the product uses pure generally; If required it can be diluted with the solvent DILUOIL. REBLOCK applies to spray, brush or dip. The main requirement for the success of consolidating treatment what this product soak completely altered the surface layer and reaches the healthy layer of material inside avoiding the formation of harmful surface crusts. For this purpose it is advisable to make the material by impregnation for small areas by applying REBLOCK extra wet-on-wet times up until the material no longer able to receive the product. After 2-3 weeks after surgery to check if have reached the optimal consolidating effect and if necessary repeat the procedure. On some materials may be useful to wash the surface immediately after applying the product DILUIOL REBLOCK to avoid unwanted whitening caused by ethyl silicate drying on the surface of the material. Consolidated materials with REBLOCK (after about a month) can be subsequently treated with waterproofing protectives (es. TIM, SILOX6) or painted with mineral paints (siloxane, silicates, etc.).

KW-P - Cristallizzante in polvere per la lucidatura  di marmi e travertini
KW-P

Crystalising powder for polishing marble and travertine Product in powder for the crystallization in the wet of flooring in marble. Gives lustre to the surface without creating films. Maintains the natural appearance of marble, renders the surfaces that are not very permeable to water and dirt, facilitating cleaning. Characteristics and use: on all the stone materials lucidabili calcareous. Do not use on granite, slates, sandstone, ceramic materials, synthetic agglomerations. Instructions for Use: Ready to use. Wet the pavement with water. Pour 20-60 gr (a fist) of powder KW-P on the surface, place the white disk on the powder and spraying water in the area surrounding the disk of the single-brush scrubber up to obtain a creamy consistency of the powder. Proceed working on 1-2 square meters at a time for a few minutes. Add water to maintain the creamy product. Then proceed as above. Do not leave to dry the paste on the surface! Finished the crystallization process, remove with aspiraliquidi. After the crystallization of the entire surface, cleansing with mild detergent solution (e.g. UNIPUL diluted 5% in water). Yield: depending on the porosity of the nature of the stone to be treated and the number of applications. Normally: 1 kg / 30-40 sqm. 

KW STAR - Lucidante in polvere per marmi e graniti
KW STAR

Polishing powder for granite and ceramic materials Product for wet polishing of granite floors, ceramic materials and porcelain stoneware. It gives shine to the surface without creating films. Mentiene the natural aspect of the material and makes the surfaces slightly permeable to water and dirt, which facilitates cleaning. FEATURES AND USE: all stones such as silica and silicate materials (granite, polished porcelain tiles and other ceramic materials). INSTRUCTIONS: ready. Wet the floor with clean water. Pour 30-60 gr (a KW-SPECIAL dust on the surface fist), place the white disk on dust and spray water in the area surrounding the disc, until obtaining a creamy consistency of the powder. Continue working on 1-2 square meters at a time for a few minutes, add water to keep the creaminess of the product. DO NOT allow to dry the dough on the surface! After the polishing process, remove the residue with a wet vacuum cleaner. After polishing of the entire surface, clean with mild detergent solution (eg. UNIPUL diluted 5% in water). YIELD: normally 1 kg / 30-40 sqm.

KW SPECIAL - Lucidante in polvere per granito e gres porcellanato
KW SPECIAL

Polishing powder for granite and ceramic materials Product for wet polishing of granite floors, ceramic materials and porcelain stoneware. It gives shine to the surface without creating films. Mentiene the natural aspect of the material and makes the surfaces slightly permeable to water and dirt, which facilitates cleaning. FEATURES AND USE: all stones such as silica and silicate materials (granite, polished porcelain tiles and other ceramic materials). INSTRUCTIONS: ready. Wet the floor with clean water. Pour 30-60 gr (a KW-SPECIAL dust on the surface fist), place the white disk on dust and spray water in the area surrounding the disc, until obtaining a creamy consistency of the powder. Continue working on 1-2 square meters at a time for a few minutes, add water to keep the creaminess of the product. DO NOT allow to dry the dough on the surface! After the polishing process, remove the residue with a wet vacuum cleaner. After polishing of the entire surface, clean with mild detergent solution (eg. UNIPUL diluted 5% in water). YIELD: normally 1 kg / 30-40 sqm.

KW L - Cristallizzante lucidante liquido per Marmi, Travertini e materiali calcarei lucidi
KW-L

Crystallizer liquid stones and polished calcareous materials Product crystallizing liquid for periodic polishing of high traffic superfci, such as limestone, marble, and limestone traverti concrete conglomerates. Renews and preserves the shine of the floors and facilitates routine cleaning. FEATURES AND USE: for polishing marble, travertine, calcareous agglomerates. Do not use on Granites, Slates, Sandstone, Ceramic Materials and synthetic agglomerates. INSTRUCTIONS: KW-L is ready for use. Shake before using. Clean and degrease the surface well. A dry pavement spray KW-L nebulizzandolo on the surface and immediately work with brush equipped with steel wool disc until complete absorption of the product and the polishing of the floor. Treat 1-2 square meters at a time. Rinse off after a few hours with water and mild detergent (eg. UNIPUL). For a better shine, polish the floor with a white disk. YIELD: in the periodic maintenance 1 lt / 40-60 sqm; on very worn surfaces 1 lt / 10-30 sqm.

OILTONER - Pigmento idro-solubile per i prodotti. Palladium, Tuscania-oil, Ultraton, Tiroil, Olio 41, CArezza plus, Royal wax. Ver.bianco, nero, giallo, castagno, noce, rosso
OILTONER

Pigments in oil-soluble dispersed Description: waste oil-solvent soluble inorganic and organic pigments. Fields of application: for enhance products: ONIX, PALLADIUM, TUSCANIA-OIL, TIROIL, 41 and CARESS OIL PLUS, FLUOIL, TECNO, ROYAL WAX OIL. Color version: white, yellow, red, chestnut, walnut, black. Performance: finisher/fluid-based polishing waxes in dispersion fine with great penetration capacity and coverage of stone surfaces. Its smooth even at low temperatures, allows a quick and easy application without creating backlogs. Forms a waxy water-repellent finish, outstanding resistance to wear and dirt. Jessica quickly. Leaves no unpleasant odours during use and in closed environments. Does not yellow over time and can also be applied on clear or white materials (marble). Product made of organic solvents with low toxic to man and the environment. The dry residue that is non-toxic protection. Can be easily colored with desired color version OILTONER. Can be mixed with OIL or TUSCANIA PALLADIUM to give extra tone colour of the treated material. Directions for use: SHAKE BEFORE USE. Add OILTONER in the product by mixing or stirring vigorously enhance until homogenous pigment dispersion. Use concentrations (expressed in grams of pigment per litre of product) of individual pigments products are as follows: white: recommended only in products up to a max of 150 g/l. Standard concentration 100 gr/lt – Walnut Chestnut-yellow-red: in all products up to a max of 150 g/l. Standard concentration 50 gr/lt black: in all products up to a max of 70 g/l. Standard concentration 20 gr/lt

TIXO Smacchiatore per la rimozione delle macchie di olio e grasso di origine animale e vegetale su materiali lapidei
TIXO

Stain remover for the removal of oil stains and grease of animal and vegetable origin of stone materials Product in alkaline dispersion thickened to remove oils and animal and vegetable fats, drying oils, soot and residues (carbon black) from absorbent stone materials. Particularly suitable for vertical surfaces and / or localized interventions. FEATURES AND USE: on all stone materials (Cotto, Stone, glazed ceramics, clinker, stoneware, cements, grits, etc.). Do not use on wood, linoleum, rubber and PVC. Protect the painted surfaces and anodized aluminum from contact with TIXO. INSTRUCTIONS FOR USE: ready to use: proceed with the application of the product with a spatula or palette taking care to leave a layer of at least 3-5 mm TIXO on the stain to remove. If necessary, the extractive duration of the action can be increased by covering the wrap with a sheet of plastic material (eg. Soft tape or Domopack) so as to slow down the evaporation. Always let the wrap dry and then proceed to its removal Dry with nylon brush or broom. Rinse with an acid solution (eg. DELICACID or VIACEM diluted 1: 1 in water) the acid-resistant materials, while for the most delicate materials only rinse with plenty of water. Check that it is removed and repeat the application if necessary. YIELD: according to the absorbency and the type of material. On average, with 1 kg of product it is covers about 1-2 square meters of surface. 

ALGANET - Pulitore per la rimozione di incrostazione biologiche come alghe e licheni sui pavimenti e rivestimenti
ALGANET

Stain remover cleaner for fouling Product that removes deposits, even large, algae, moss and other bio-fouling as blackening by micro-organisms, residues of leaves and flowers, animal excrement, urine, etc. It has a strong power sanitizer on surfaces. It develops more effective action of bleach (sodium hypochlorite). FEATURES AND USE: on all surfaces and exterior stone artefacts (Cotto, Natural Stone, Concrete, Klinker, Porcelain tiles, ceramics, etc.). It has a strong power sanitizing of the treated surfaces. INSTRUCTIONS FOR USE: dissolve in a clean bucket of plastic material a part by weight of ALGANET in 6-8 parts of water (eg. 1 kg of powder in 6-8 liters of water) by mixing for several minutes. For maximum cleaning action, use warm water. The solution thus obtained should be used immediately and consumed within 3-4 hours. It can be applied with a brush, sponge, soft cloth, mop. Wet the surface to be treated, leaving the product to act as long as possible. Subsequently, the surface should be rinsed with water to remove dirt degraded. Proteggre plants, textiles, metal and wood. YIELD: with 1 kg of powder are prepared about 6-8 l iters of cleaning solution (average consumption 1 l / 5-7 sqm).  VIDEO

TOGLIRUGGINE LIQUIDO | Smacchiatore dalla ruggine per pavimenti e rivestimenti
TOGLIRUGGINE LIQUIDO

Rust Stain Remover for stone materials Product specific cleaner for the removal of rust stains and metal oxides by stone materials. It does not contain acids and can also be used on polished calcareous materials. FEATURES AND USE: for delicate surfaces such as marble and travertine polished, polished and grits Slates. It can also be used on all other stone materials (Cotto, Cement, Ceramic Materials, etc.). It does not contain acids. INSTRUCTIONS FOR USE: ready to use product. Proceed with the application of rust-removal LIQUID with a trowel, shovel or brush making sure to leave a generous layer of product on the stain to remove. Let the product as long as the reaction for rust removal is not successful (the product will take on a purplish color); the time required for the reaction depends on the type of material. After successful reaction, you must remove the product within 10-15 minutes and rinse with plenty of water. Repeat if necessary. YIELD: average 1 lt / 6-10 sqm. VIDEO

PULI GRAFF - Prodotto per la rimozione dei graffiti e pennarelli da partei e muri
PULI GRAFF

Stain remover cleaner for inks and dissolving graffiti Product stain remover to remove the ink stone materials, markers, spray paint in general. Do not leave harmful residues in the material and is also effective for the removal of penetrated ink stains in the porosity of the material. It leaves no odor during use. FEATURES AND USE: on all stone materials (Cotto, Stone, Ceramic glazed and not, clinker, stoneware, cement, grit, etc.). Protect painted surfaces, wood and anodized aluminum from contact with PULIGRAFF. INSTRUCTIONS FOR USE: ready to use. Apply the product with a spatula or palette taking care to leave a layer of at least 3-5 mm PULIGRAFF on the stain to remove. If necessary, the extractive duration of the action can be increased by covering the wrap with a stretchable plastic sheet (eg. Soft tape or Domopack) so as to slow down the evaporation. Always let the wrap dry and then proceed to its removal Dry with a nylon brush or broom. Rinse finally with water. YIELD: on average with 1 kg of product it covers about 1-2 square meters of surface.

DEOSSIDA | Pulitore smacchiatore della patina d'invecchiamento delle pietre
DEOSSIDA

Stain remover for the removal of oxidation coatings on stone materials Product to remove the patina of oxidation of many stones exposed to atmospheric agents, renewing the appearance. Ideal for extractive compresses to a long and deep capabilities of removing rust stains and metal oxides penetrated the material. FEATURES AND USE: on all surfaces and stone artefacts stones, Cotto, cement, synthetic agglomerates and other absorbent stone materials, with the exception of limestone with shiny surfaces (eg. Marmi). INSTRUCTIONS: Product to be mixed with water before use and mix until it forms a paste. Proceed with the application of the product with a spatula or plastic scoop, taking care to leave a layer of 2-3 mm deoxidizes on the surface to be cleaned. In case of removal of stains is recommended, if necessary, to cover the wrap with a sheet of plastic material (eg. Soft tape or Domopack) so as to slow the evaporation of water. Allow to dry the pack prior to its removal Dry with a nylon brush or broom. Finally, rinse with plenty of water. If necessary, repeat the application. YIELD: on average with 1 kg of prepared mixture (corresponds to about 300 g of powder) it covers about 1 square meter of surface.

SMACCHIO POLVERE | Pulitore smacchiatore per sostanze organiche colorate (vino, frutta, caffè, ecc)
SMACCHIO POLVERE

Stain remover cleaner for colored organic matter (wine, coffee, futta, etc.) Product high effectiveness stain remover for the removal of oxidizable colored spots. It removes stains from stone materials: coffee, wine, juice, food residues typically, blood, urine and tannin. FEATURES AND USE: of Natural Stone, Cotto, Cement, grits, Agglomerates Synthetics, Ceramics. INSTRUCTIONS FOR USE: product to be dissolved in water before use and mix until it forms a paste. Do not use metal containers. Proceed with the application of the product with a spatula or plastic scoop, taking care to leave a layer of 2-3 mm SMACCHIO on the stain to remove. If necessary, the extractive duration of the action can be increased by covering the wrap with a sheet of plastic material (eg. Soft tape or Domopack). Allow to dry the pack prior to its removal Dry with nylon brush or broom. Finally, rinse with plenty of water. Control when removing the stain and repeat the application if necessary. Protect metal surfaces. YIELD: on average with 1 kg of prepared mixture (corresponds to about 300 g of powder) it covers about 1 square meter of surface.

SOLVOSIL - Pulitore Smacchiatore per oli, grassi siliconi, colle e cere su cotto, pietra e agglomerato cementizio
SOLVOSIL

Stain remover for mineral oil stains, adhesives, waxes, silicones Product that removes stains of oils and synthetic lubricant greases, glues, waxes and paint materials from terracotta, stone, concrete and stone materials in general. FEATURES AND USE: on all stone materials (Cotto, Stone, Ceramic glazed and not, clinker, stoneware, cement, grit, etc.). Do not use on synthetic and synthetic slurries agglomerations. It possesses rapid and powerful action of dissolution of stains without leaving marks in the materials of which it is used. It does not leave streaks in the materials of which it is used. Thanks to the special addesante, the action of the product can be in time. INSTRUCTIONS FOR USE: ready to use product. OPEN WITH CAUTION. Mix well. Apply the product with a spatula or palette taking care to leave a layer of at least 3-5 mm SOLVOSIL on the stain to remove. If necessary, the extractive duration of the action can be increased by covering the wrap with a stretchable plastic sheet. Always let the wrap dry and then proceed to its dry-removal nylon brush or broom. Finally rinse with a mild detergent solution (eg. UNIPUL diluted in water). If necessary, repeat the application. Protect the painted and plastic surfaces. YIELD: on average with 1 kg of product it covers about 1-2 square meters of surface.

marbecdef2 - Kit di manutenzione per cotto e pietra versione oapca
Kit di manutenzione cotto e pietra, Finitura opaca

Kit with everything you need for cleaning and maintenance of treatments carried out on cooked, stones and absorbing domestic conglomerates. Matt finiturare version. Contains -1 liter of detergent FLORA -1 lt maintenance wax REFIX MATT -1 red Plug to take signs of rubber shoes -1 undiluted fleece

marbecdef2- Kit di manutenzione cotto e pietra. Versione lucida
Kit di manutenzione cotto e pietra, Finitura lucida

Kit with everything you need for cleaning and maintenance of treatments carried out on cooked, stones and absorbing domestic conglomerates. Version with polished finiturare. Contains -1 liter of detergent FLORA -1 lt maintenance wax POLISHED REFIX -1 red Plug to take signs of rubber shoes -1 undiluted fleece

marbecdef2 - Kit di manutenzione per marmo, granito e agglomerato
Kit di manutenzione per marmo, granito e agglomeratI compatti

Kit with everything you need for cleaning and maintenance of floors in marble, granite and agglomerate. Contains -detergent UNIPUL 1 lt -1 lt maintenance wax LUXOR -1 red Plug to take signs of rubber shoes -1 undiluted fleece