CHOOSE PRODUCT:

Select your product from the list or search for Type


ACQUABLOCK | Protettivo consolidante anti-infiltrazioni per pavimenti e rivestimenti in materiale lapideo
ACQUABLOCK

Consolidating, anti-infiltration for stone materials Product that penetrates into the material and forms an invisible chemical barrier, drastically reduces water absorption capacity and eliminates infiltration from cracks. Ideal for waterproofing joints. Do not film. CHARACTERISTICS AND USE: on all absorbent stone materials (Terracotta, Stones, Cement, Clinker and Stoneware, etc.). Ideal for waterproofing floor joints in the outside. It water-repels the surface and restores the original cohesion of decoese materials. ACQUABLOCK eliminates water infiltration from artifacts caused by cracks and cracks up to 1.5 mm wide. It has excellent resistance to aging. It does not yellow. INSTRUCTIONS FOR USE: The product is used pure on dry and clean material. Apply by spray or brush by uniformly wetting the surface to be treated until saturation, following absorption. Insist on joints and cracks. After 5-10 minutes completely remove the product not absorbed by the material, rubbing the surface with a soft cloth or absorbent paper. The application of any second hand must be carried out ("wet on wet") as soon as the first is dry on the surface. ACQUABLOCK dries in 6-8 hours. Protect or prevent the newly treated surfaces from being wet by rain before 24 hours of application. YIELD: On stones, cooked "Toscano type", cements 1 lt / 10-15 sqm; On plaster, plaster and very absorbent stones 1 lt / 4-8 sqm.

ALGANET - Pulitore per la rimozione di incrostazione biologiche come alghe e licheni sui pavimenti e rivestimenti
ALGANET

Stain remover cleaner for fouling Product that removes deposits, even large, algae, moss and other bio-fouling as blackening by micro-organisms, residues of leaves and flowers, animal excrement, urine, etc. It has a strong power sanitizer on surfaces. It develops more effective action of bleach (sodium hypochlorite). FEATURES AND USE: on all surfaces and exterior stone artefacts (Cotto, Natural Stone, Concrete, Klinker, Porcelain tiles, ceramics, etc.). It has a strong power sanitizing of the treated surfaces. INSTRUCTIONS FOR USE: dissolve in a clean bucket of plastic material a part by weight of ALGANET in 6-8 parts of water (eg. 1 kg of powder in 6-8 liters of water) by mixing for several minutes. For maximum cleaning action, use warm water. The solution thus obtained should be used immediately and consumed within 3-4 hours. It can be applied with a brush, sponge, soft cloth, mop. Wet the surface to be treated, leaving the product to act as long as possible. Subsequently, the surface should be rinsed with water to remove dirt degraded. Proteggre plants, textiles, metal and wood. YIELD: with 1 kg of powder are prepared about 6-8 l iters of cleaning solution (average consumption 1 l / 5-7 sqm).  VIDEO

ANTISPORCO | Protettivo per pavimenti in gres porcellanato
ANTISPORCO

Anti-slip, anti-stain protection for micro-porous materials Waterproof invisible protective product for porcelain stoneware surfaces, ceramics, stones and glossy agglomerates. It drastically reduces dirt adhesion by facilitating ordinary cleaning. CHARACTERISTICS AND USE: Anti-stain anti-stain coating for micro-porous materials such as: porcelain stoneware, ceramics, stones and glittery agglomerates that tend to retain dirt in the microporousness of the surface, making it easy to clean it in regular maintenance (washing) . Shapes on the surface an invisible chemical barrier that does not alter the appearance and color tone of the material; Does not form superficial films. It does not yellow in time and degrades by altering the material. INSTRUCTIONS FOR USE: Shake well before use. Spray small amounts of product on the surface by distributing the surface smoothly with a soft cloth. Any excess product after drying should be removed by rewetting a wet cloth of ANTISPORCO on the surface. The product must be re-applied periodically, even in delimited areas of the floor, depending on the washing and surface roughness (usually 3-6 months). YIELD: normally 1 lt / 40 - 60mq

DELICACID Detergente disincrostante acido per pietre e materiali lapidei
DELICACID

Decrusting detergent acid for stones and stone materials Cleaning product for cleaning decalcarizzante decrusting and for the removal of cement slurries, efflorescence and calcareous incrustations for stones, agglomerates and ceramic materials in general. Characteristics and use: for washing decalcarizzante of all the stone materials (brick, stone, Klinker, stoneware, grits, slabs, Cement, Palladiane, glazed ceramics resistant to acid). Avoid use on calcareous stones polished, slates (overhead), grits and cementitious agglomerates transparencies. Does not contain hydrochloric acid. Fumiga not and does not develop toxic vapors. Can be used in water cleaners, scrubber-dryers and other equipment for washes of large surfaces. Instructions for use: You can use either pure or diluted in water. Pure: on deposits and calcareous deposits consistent and tenacious. Diluted 1:1-2 in water: for the washings to where it is needed a normal action decrusting decalcarizzante-and neutralization of previous alkaline washings. Diluted 1:3-4 in water: on calcareous stones not polished marble and not polished. Spread DELICACID on the surface and let it act a few minutes. Diluted 1:5-10 in water: for washings after the laying of ceramic tiles. Wipe the surface with pads or discs in plastics fibers or brushes made of nylon, tinex or carborundum; repeat the wash if necessary. Always rinse with plenty of water. Consumption : to remove substantial calcareous residues 1 lt /4-6 sqm; for normal washings 1 lt / 10-15 smq; on ceramic materials 1 lt / 20-40 sqm.

DEOSSIDA | Pulitore smacchiatore della patina d'invecchiamento delle pietre
DEOSSIDA

Stain remover for oxidation patinas on stone materials  Concentrated powderd extractor for the removal of oxidation patinas from stone materials exposed to weathering, renewing the look. It’s the ideal for extractive compresses, for a long and deep removal of rust stains and metallic oxides, penetrated in stone materials. RETROCHARACTERISTICS AND USE: Deossida is a specific extractor for compresses. We can use it for a deep removal of oxidation patinas caused by the ageing process of the material, rust stains, other metallic oxides for surfaces, stones, terracotta, cement, cinder and synthetic agglomeration and other stone sorbent materials, except calcareous stones with shiny surfaces (ex. Marble). INSTRUCTIONS FOR USE: knead with water before the use and mix until it forms a paste. Apply the product with a spatula, taking care to leave a coat of 2-3 mm of DEOSSIDA on the surface to clean. In case of removal of stains we recommend, if necessary, to cover the compress with a sheet of plastic (ex. film), to retard water evaporation. Leave drying the compress before of his dry removal with a nylon or sorghum brush. At the end rinse with a lot of water. If necessary, repeat the application. YIELD: on the average with a 1kg of paste (about 300 gr of dust) we can cover about 1mq of surface. PACKAGING: 250gr - 1kg

DESOLF 4 - Pulitore desolfatante in polvere per pietre e materiali lapidei
DESOLF 4

Desulphating powder for stone materials Product for removal of calcium sulphate (calcite) screeds on stone materials. CHARACTERISTICS AND USE: for decking on all absorbent stone materials (Cotto, Pietra, Gres, Cement, etc.), even delicate. It dissolves the "dark spots" on the Cotto and the "black crusts" outside on the surfaces of limestone materials in polluted atmospheres. Removes copper oxide residues. INSTRUCTIONS FOR USE: dilute the powder with water and mix until a paste is made (for a medium thick wrap, dilute one part by weight of powder in two parts of water). Do not use metal containers. Apply the product with a spatula or plastic pallet, taking care to leave a 2-3 mm thick layer of DESOLF4 on the stain to be removed. On too absorbent materials, cover the treated surface with a sealant film. Allow the wipe to dry before removing it with nylon brush or sage. Finally rinse with plenty of water. YIELD: On average, 1 kg of prepared dough (corresponding to about 300 grams of powder) covers about 1 square meters of surface.

ECOMARBEC | Detergente sgrassante biodegradabile per pavimenti
ECOMARBEC

Eco-friendly detergent degreasing cleaner Product that disintegrates and solubilizes the greasy dirt, sanitizes surfaces in cotto, stone, cement agglomerate, porcelain stoneware and ceramic material in general. Biodegradable. CHARACTERISTICS AND FIELD OF APPLICATION: cleans, degreases, sanitizes surfaces in cotto, stone, cement, porcelain stoneware and other ceramic materials. It can be used pure or diluted in water for hand and machine washings (ex. scrubber, pressure washer). The product solubilizes greasy substances, making them easily removable. The product is biodegradable. It doesn't contain caustic soda, ammonia, fragrances, dyes and solvents. INSTRUCTION OF USE: - Pure or diluted up to 1:2 parts in water: for strong degreasing washings, to remove large greasy dirt residues (cooking oils, lubrificating oils, fats and stubborn dirt residues). – Diluted 1:20-30 parts in water: (1/2 glass of ECOmarbecdef2 in 5 lt of water): for periodic degreasing washings of the floors. – Diluted 1:80-90 parts in water: (1/4 glass in 5 lt of water): for the daily cleaning of treated and washable floor surfaces. YIELD: it depends on the concentration of use.  

FLORA | Detergente neutro per pulizia dei pavimenti di casa
FLORA

Concentrated detergent cleaner for floors Neutral detergent product for the ordinary cleaning of all hard surfaces: it combines the sanitizing function and the degreasing power. Not aggressive for the materials CHARACTERISTICS AND FIELD OF USE: not aggressive concentrated cleaner to clean floors in cotto, glazed ceramic, porcelain stoneware, natural stone, cement agglomerate, treated wood, synthetic surfaces. Low foaming detergent that leaves a pleasant odour of lavender in the environment. It doesn't leave halos on the surface. FLORA combines the detergent/degreaser action with an efficacious sanitizing function. INSTRUCTIONS FOR USE:     – Diluted 1: 2-4 parts in water: to remove considerable dirt in the periodic cleaning of untreated surfaces.     – Diluted 1: 20-30 parts in water (a glass in 8-10 litres of water): for normal dirt in the periodic cleaning of hard untreated surfaces.     – Diluted 1: 50-60 parts in water (1/2 glass in 8-10 litres of water): for the ordinary cleaning of polished stone surfaces, glazed ceramics, porcelain stoneware, klinker.     – Diluted 1: 80-100 parts in water (1/4 glass in 8-10 litres of water): for the ordinary cleaning of treated floor surfaces. YIELD: it depends on the concentration of use.  

GP 6 | Protettivo concentrato per pavimenti in gres porcellanato
GP 6

Protective stain release concentrate, stain-resistant for porcelain floor tiles Product water-based film-forming not that does not alter the appearance of the material. Drastically reduces the adhesion of dirt by facilitating the cleanability of the surface. Characteristics and use: on all types of Stone Materials micro-porous absorbents such as shiny porcelained stoneware or lapped and synthetic agglomerations. Special for the pre-protection of ceramic materials in the coating/floor, before the grouting with the cement slurries, colored and/or supplemented with latexes. Instructions for Use: Shake before use. You èuò use pure or diluted (max 1:5 in water). Spray a small quantity of product on the surface by evenly distributing the latter with spandicera fleece/soft cloth, wetting homogeneously the material. After a few minutes to polish the surface with a soft cloth or single-brush scrubber equipped with hard white soft or hard in microfiber. Any excess product after drying must be removed by reviewing a cloth moistened GP 6 on the surface. The product, just dry (15 - 30 minutes) is immediately walkable. GP 6 must be reapplied periodically, even only in confined areas of the floorings, in function of the frequency of washings and the treading surface (generally every 3- 6 months). Yield: indicatively 1 lt / 40-60 sqm.

GRES LINDO - Detergente concentrato per pavimenti in gres porcellanato
GRES LINDO

CONCENTRATED DETERGENT FOR PORCELAIN FLOOR TILES, STONES AND CERAMIC MATERIALS FILDS OF APPLICATION Ideal to clean all smooth microporous surfaces in stone as Porcelain tiles, Ceramic, Quarry tiles, Cement or Synthetic Agglomerates. CHARACTERISTICS It eliminates fastly and deeply all the dirt, also the most stubborn, from low ab-sorption and not absorbant materials where it is necessary to make a fast and easy domestic cleaning action. - It does not leave halos; - it brings back the material to its original colour; - the continuous use keeps joints clean; -it avoids the necessity of frequent washes with aggressive acid detergents. INSTRUCTIONS FOR USE GRES LINDO diluted 170-250ml (a glass) in 5lt of water: for an extraordinary cleaning with degreasing agent or to eliminate traces or patinas of calcareous sinter left by the use of strong waters with domestic use. Spread the product on the surface with cloth, mop and let it dry some minutes, at the end rinse all with clean water. GRES LINDO diluted 20-50ml (above one or half cup of coffee) in 5lt of water: for the ordinary detergency of microporous surfaces in general. YIELD Depending on the concentration of use PACKAGING 1 lt - 5 lt

GRIPPER | Trattamento antiscivolo per pavimenti
GRIPPER

Anti-slip treatment for floors Produced for non-slip treatment of all materials containing silicates (such as granites, porcelain stoneware, enamelled ceramics, etc.) inside and outside. It is on the surface of the material a microporosity that dramatically reduces the slippage of the wet surface. CHARACTERISTICS AND USE: for all materials containing silicates (granites, porcelain stoneware, glazed ceramics, etc.) inside and outside. It makes non-slip glossy and dense flooring for their slippery when wet. The brightness and color of the treated surfaces can also undergo significant variations. INSTRUCTIONS FOR USE: ready to use product. Remove any protective layers (waxes, polymers, impregnants). Apply homogenously the surface by spreading GRIPPER with sponge, veil, mop. Proceed on well-defined pavement areas (eg break through the joints) avoiding partial and double overlapping. The reaction time of the product depends on the desired effect and the type of material (generally 10-15 minutes). During this time the product should not dry. After the reaction time has elapsed, GRIPPER is neutralized with a SGRISER 1:10 solution (1 L of SGRISER in 10 L of water). Finally, rinse with plenty of water. YIELD: Approximately 10-20 sqm / lt.

KW SPECIAL - Lucidante in polvere per granito e gres porcellanato
KW SPECIAL

Polishing powder for granite and ceramic materials Product for wet polishing of granite floors, ceramic materials and porcelain stoneware. It gives shine to the surface without creating films. Mentiene the natural aspect of the material and makes the surfaces slightly permeable to water and dirt, which facilitates cleaning. FEATURES AND USE: all stones such as silica and silicate materials (granite, polished porcelain tiles and other ceramic materials). INSTRUCTIONS: ready. Wet the floor with clean water. Pour 30-60 gr (a KW-SPECIAL dust on the surface fist), place the white disk on dust and spray water in the area surrounding the disc, until obtaining a creamy consistency of the powder. Continue working on 1-2 square meters at a time for a few minutes, add water to keep the creaminess of the product. DO NOT allow to dry the dough on the surface! After the polishing process, remove the residue with a wet vacuum cleaner. After polishing of the entire surface, clean with mild detergent solution (eg. UNIPUL diluted 5% in water). YIELD: normally 1 kg / 30-40 sqm.

METAL STRIP - Decerante rapido per cere metallizzate su materiali lapidei
METAL STRIP

Quick wax remover cleaner for stone materials Product alkaline wax remover for the quick removal of old layers of synthetic/matallic waxes  and various polymers. It does not contain caustic soda; low foaming. FEATURES AND USE: for stripper-strong sfilmante washing of all stone materials (Cotto, Stone, glazed ceramics, clinker, stoneware, cement, grits, etc.). No need for acid neutralization. It leaves no odor during use and environments; low schiumogeneità. Do not use on wood, linoleum, rubber and PVC. Protect the painted surfaces and anodized aluminum from contact with METAL-STRIP. INSTRUCTIONS: can be used pure or diluted in water. Pure: on thick accumulations of waxes and polymers. Diluted 1: 4.8 in water for washing where a normal wax remover action is necessary. Diluted 1: 15.10 in the water: for periodic washing with scrubbers. Apply the product wetting the surface thoroughly and let it act 5/10 minutes. Proceed for small areas (10-15 square meters). Scrub the surface with pads or discs in plastic fibers. Remove residues of the dewaxing and rinse with water. Do not let dry the old layers of wax dissolved by the stripper. CONSUMPTION: for energetic washes 1 lt / 4-8 sqm; for normal washes 1 lt / 10-15 sqm.   VIDEO

MICRONET | Detergente intensivo per materiali lapidei microporosi
MICRONET

INTENSIVE DETERGENT FOR MICROPOROUS STONE MATERIALS FIELDS OF APPLICATION For the extraordinary cleaning and the removal of dirt caused by trampling, even the most stubborn, from microporous stone materials, such as: porcelain tiles, ceramic, quarry tiles, polished stones and agglomerates. CHARACTERISTICS Concentrated detergent based on inorganic salts, ideal for: the deep cleaning of surfaces in porcelain tiles, ceramic, klinker, polished stones, cement or synthetic agglomerates. It removes stubborn dirt, penetrated into the microporosity of the materials. Excellent for joints cleaning between ceramic tiles, blackened by accumulated dirt. Low foaming. It does not leave halos. INSTRUCTIONS FOR USE The concentration of use depends on the type of dirt to be removed: Pure or diluted 1 part of MICRONET in 1 part of water: for the removal of stains and stubborn dirt. Pour the product on the stain or on the surface, wait a few minutes and wipe with pads or soft disks for floor scrubber. Remove the residue with wet vacuum or dry cloth. Finally rinse the surface with a diluted acid solution, to remove the residues (eg solution 2 - 5% of DELICACID). Dilute 50cc - 100cc of MICRONET in 1 liter of water: for extraordinary washing of surfaces. Pour on the surface to be cleaned, leave to act for a few minutes and wipe with buffers or soft disks for floor brush until the dirt is removed. Remove residue and dirt with wet vacuum or soft cloth and then rinse with water. On some materials (polished or smooth surfaces) it may be useful to clean again the surface with a clean damp cloth. Dilute 10cc - 100cc of MICRONET in 1 liter of water: for the ordinary cleaning of highly trampled floors, with washer-dryer machine. YIELD Depending on the concentrations of use. PACKAGING 1lt-5lt  

NANO SYSTEM - Protettivo antimacchia nanotecnologico per materiali lapidei comoatti
NANO SYSTEM

Nano-proof anti-slip and stain resistant material on compact materials Product for nano-protection to prevent accumulation of dirt in micro-porosity of compact materials, porcelain stoneware and synthetic agglomerates CHARACTERISTICS AND USE: on porcelain stoneware (in particular polished), synthetic agglomerates and other micro-porous materials. Nano-protection based on two individual solutions (A and B) designed to prevent dirtiness by avoiding contamination and accumulation in the surface microporousness of the material of colorants, oil, dirt particles, cement, etc., allowing a simple Cleaning with detergent products. The nano-protection is very resistant both chemically and mechanically, INSTRUCTIONS FOR USE: The nano-final protection is achieved by applying a first protective solution A and then a second protective solution B. Spraying small amounts of solution A on the surface and distributing the product by means of a single sponge provided with cloth Microfibre until drying the material (if it does not have a single brush and in particular for small surfaces, the application can also be carried out manually). Proceed with a few meters at a time. If necessary, remove any dampened residues by rinsing a wet solution solution A on the surface. Wait for at least 24 hours and apply solution B as above. The maximum protective capacity is reached after about 24 hours at room temperature (about 20 ° C). In particularly cold environments, a longer hardening time may be required. YIELD: nano system (A + B) 1 lt + 1 lt / 70-150 sqm.

MARBEC - Pulitore per la rimozione di boiacche epossidiche
NOEPOX

Cleaner for the removal of epoxy grout residues Product specific thickened cleaner for the removal of the residues and of epoxy grouts stains on porcelain, ceramic, granite and quartzite.  FEATURES AND USE: thickened mixture of organic solvents that do not contain CFCs. On all surfaces in porcelain tile, glazed ceramic tiles, glass mosaics. It can be used to clean up the compact stone materials (eg. Granites, Quartzite, etc.). Can be used both inside and outside, removes hardened residues of the grout on the tile surface without causing corrosion or discoloration of the grout has already hardened escape. Due to its viscosity it can also be used with ease on the vertical surfaces. INSTRUCTIONS: using pure. Wait at least 24 hours after grouting before using NOEPOX. Always apply on a dry surface. Apply the product with a brush or roller on the surface to be cleaned. Always work on limited areas (not more than 30 square meters). Leave for about 30-60 minutes on the dried grout residue, 2-4 hours or more on hardened residues and consistent grout. Then rinse with water (preferably with UNIPUL detergent water solution 1:10) rubbing the surface with a nylon brush or abrasive sponge, moving diagonally across the joints. A floor you can intervene with floor machine with the appropriate discs. Finally, rinse with water again. YIELD: to remove dried residues (after about 1-2 days.), 1 lt / 15-20 sqm; to remove residues of hardened (after 2-3 days.), 1 lt / 10-15 sqm.

POLIFIN | Finitore anti-sporco anti-usura per pavimenti in materiale lapideo
POLIFIN

Waterproof and anti-wear finisher for stone materials Produced in high gloss resistant resinous emulsion. Particularly suitable for finishing smooth surface materials. CHARACTERISTICS AND USE: on all types of interior stone materials (cooked, natural stones, granules, cements, clinkers) especially on polished or polished finishes. Also suitable for resilient materials (PVC, Linoleum). INSTRUCTIONS FOR USE: Usually it is used pure. Shake before using. The product is distributed with a spatula, cloth or sponge. It should be laid in thin layer by homogenously wetting the surface and without making excess. Apply the second coat as soon as the first is dry. POLIFIN can also be distributed with a spray-buffing technique with a single-disc brush (speed up to 400 rpm) with medium hardness disk, especially on polished surfaces. Dry quickly, generally in 2-3 hours in well-ventilated environments. YIELD: - On rough surface materials 1 lt / 15-18 mq; - On smooth surface materials 1 lt / 25-50 sqm.

POWER DET |Detergente smacchiatore intensivo per gres porcellanato
POWER DET

Concentrated descaling degreasing detergent specific to eliminate persistent laying residues, halos and stains that are difficult to remove on porcelain stoneware, quarry tiles and glazed ceramic. FIELDS OF APPLICATION For the extraordinary descaling cleansing of hard surfaces (polished and raw porcelain tiles, quarry tiles, glazed ceramic). CHARACTERISTICS Film remover and dirt dissolver detergent with acid limestone removing and descaling functions. POWER DET: can have, in relation to its concentration of use, the function of stain remover and concentrated cleaner or the one of detergent in the periodic maintenance of hard surfaces (eg porcelain tiles); the combination of solvent and acid functions allows it to simultaneously attack organic dirt (greases, oils, polymers) and that of an inorganic nature (limestone, oxides); is indicated especially in the cleaning of hard ceramic surfaces from residues of grouts and polymer mortars even colored; It has a strong dispersing and emulsifying power against the dirt, even on that tenaciously anchored and penetrated into very compact materials (eg porcelain tiles); does not leave unpleasant odors during use and in environments. INSTRUCTIONS FOR USE You can use either pure or diluted in water. Pure, for the post-yard cleaning: to remove substantial and persistent residues of grouts, accumulation of dirt and deteriorated and stained shiny patinas. Lay POWER DET on the surface and let it dry at least 10-15 minutes. Scrub the surface with buffers in plastic fibers, enough strong to remove the dirt. At the end rinse well the surface, with abundant water, until the removal of the product and the dirt. POWER DET diluted 1 part in 1-3 parts of water: for the extraordinary decontamination washes of stained, deteriorated and very dirty surfaces. Lay POWER DET on the surface and let it act at least 10-15 minutes. Scrub directly the detergent solution on the surface with a soft cloth, buffer or discs in soft plastic fibers. At the end rinse well the surface, with abundant water, until the removal of the product and the dirt. YIELD: As descaling cleaning post-yard: 1lt/ 15-20 m² for extraordinay washes: 1lt/ 30-60 m² PACKAGING 1 lt - 5 lt 

PULI GRAFF - Prodotto per la rimozione dei graffiti e pennarelli da partei e muri
PULI GRAFF

Stain remover cleaner for inks and dissolving graffiti Product stain remover to remove the ink stone materials, markers, spray paint in general. Do not leave harmful residues in the material and is also effective for the removal of penetrated ink stains in the porosity of the material. It leaves no odor during use. FEATURES AND USE: on all stone materials (Cotto, Stone, Ceramic glazed and not, clinker, stoneware, cement, grit, etc.). Protect painted surfaces, wood and anodized aluminum from contact with PULIGRAFF. INSTRUCTIONS FOR USE: ready to use. Apply the product with a spatula or palette taking care to leave a layer of at least 3-5 mm PULIGRAFF on the stain to remove. If necessary, the extractive duration of the action can be increased by covering the wrap with a stretchable plastic sheet (eg. Soft tape or Domopack) so as to slow down the evaporation. Always let the wrap dry and then proceed to its removal Dry with a nylon brush or broom. Rinse finally with water. YIELD: on average with 1 kg of product it covers about 1-2 square meters of surface.

PULITORE FC | Pulitore per la rimozione dello smog dalle facciate
PULITORE FC

Cleaner for removal of smog facades Product which quickly removes oily substances, fat deposits from air pollution, guano. Easily applicable also on vertical surfaces. Characteristics and use: for the decrusting washing-degreaser strong on all the stone materials (brick, stone, stoneware, cement, etc.). Thanks to its viscosity can be easily applied on vertical surfaces. Instructions for Use: It uses pure. Spread the product on the surface and leave it to act at least 10-20 minutes. Wipe the surface with pads or discs in plastics fibers or with brushes made of nylon. Do not use the equipment in the plant material or animal. Always rinse with plenty of water. On the materials very porous is recommended neutralize CLEANER FC with dilute acid (es. Solution 1:10 Of DELICACID). Protect the painted surfaces and in anodized aluminum from contact with the cleaner FC. Yield: on average 1 lt / 4-8 sqm.

SGRISER STRONG WAX REMOVER DETERGENT FOR STONE MATERIALS
SGRISER

STRONG WAX REMOVER DETERGENT FOR STONE MATERIALS FIELDS OF APPLICATION For the strong wax removing, degreasing and descaling wash on all stone materials (cotto, stone, glazed ceramics, klinker, gres, cement, grits, etc.). It can be used to clean the joints blackened by the accumulation of dirt in ceramic surfaces. CHARACTERISTICS Strong alkaline-solvent detergent to remove from absorbent stone materials and not: old treatments with oils and waxes in general and some polymeric films (ex. "metal-lized waxes"); lampblack and carbon residues; to facilitate the removal of the '' dark spots '' by sulfation on the cotto; deposits of greasy dirt, darkening of atmospheric pollution, deposits of green algae and molds. It does not leave damaging residues in the absorbent material. It has a strong dispersing and emulsifying power of greasy dirt, facilitating its removal from the surface of the material. It does not leave unpleasant smells during use and in environments. INSTRUCTIONS FOR USE It can be used pure or diluted in water. The concentration of use must be determined in each situation according to the type of dirt, the amount of residues to be removed and the absorp-tion of the materialFor this purpose, preliminary washing tests may be useful. It can be used indicatively: Pure: on substantial residues of oils, waxes, large accumulations of greasy dirt, organic residues and as descaler for "dark spots SGRISER diluted in an equal part of water: for washings where a strong degreasing action is required. Spread the product on the surface and let it act for at least 10 to 20 minutes. Rub the surface with plastic fiber pads or discs or nylon brushes. To remove large oily residues, it may be use-ful to let SGRISER dry on the surface. Do not use equipment made of plant or animal material. Repeat the washing if necessary. On surfaces resistant to acids, neutralize with an acidic aqueous solution with VIACEM or DELICACID. For other more delicate materials, rinse only with plenty of water. YIELD depending on the dirt to be removed and the absorption of the material: for energetic washes 1lt / 4 -8 m²; for normal washes 1lt / 5-10 m². PACKAGING 1 lt - 5 lt - 20 lt

SMACCHIO POLVERE | Pulitore smacchiatore per sostanze organiche colorate (vino, frutta, caffè, ecc)
SMACCHIO POLVERE

Stain remover cleaner for colored organic matter (wine, coffee, futta, etc.) Product high effectiveness stain remover for the removal of oxidizable colored spots. It removes stains from stone materials: coffee, wine, juice, food residues typically, blood, urine and tannin. FEATURES AND USE: of Natural Stone, Cotto, Cement, grits, Agglomerates Synthetics, Ceramics. INSTRUCTIONS FOR USE: product to be dissolved in water before use and mix until it forms a paste. Do not use metal containers. Proceed with the application of the product with a spatula or plastic scoop, taking care to leave a layer of 2-3 mm SMACCHIO on the stain to remove. If necessary, the extractive duration of the action can be increased by covering the wrap with a sheet of plastic material (eg. Soft tape or Domopack). Allow to dry the pack prior to its removal Dry with nylon brush or broom. Finally, rinse with plenty of water. Control when removing the stain and repeat the application if necessary. Protect metal surfaces. YIELD: on average with 1 kg of prepared mixture (corresponds to about 300 g of powder) it covers about 1 square meter of surface.

SOLVALL - Pulitore solvente sfilmante per pavimenti e rivestimenti in materiale lapideo
SOLVALL

Solvent cleaner sfilmante for stone materials solvent product to slow evaporation to a deep sfilmante action on stone materials. Leaves no unpleasant odours. Characteristics and use: for washing the dissolver sfilmante on all the stone materials (brick, stone, ceramic, klinker, stoneware, cement, grit, etc.) excluding materials descrambled with polymeric binder and wood. Compared to conventional solvents (e.g. nitro, acetone, turpentine) has a lower rate of evaporation and an action dissolutrice deeper. Leaves no unpleasant odours during use and in environments. Instructions for Use: always use pure. Spread the product on the surface and leave it to act, if possible, at least 15-30 minutes (up to a maximum of 8-12 hours). Wipe the surface with pads or discs in plastics fibers or with brushes made of nylon. Emulsify with water and remove the residue. Protect all painted surfaces and plastic material from contact with SOLVALL. Yield: to remove substantial polymeric residues 1 lt / 4-8 sqm; for normal washings 1 lt / 8-12 mq.

SOLVOSIL - Pulitore Smacchiatore per oli, grassi siliconi, colle e cere su cotto, pietra e agglomerato cementizio
SOLVOSIL

Stain remover for mineral oil stains, adhesives, waxes, silicones Product that removes stains of oils and synthetic lubricant greases, glues, waxes and paint materials from terracotta, stone, concrete and stone materials in general. FEATURES AND USE: on all stone materials (Cotto, Stone, Ceramic glazed and not, clinker, stoneware, cement, grit, etc.). Do not use on synthetic and synthetic slurries agglomerations. It possesses rapid and powerful action of dissolution of stains without leaving marks in the materials of which it is used. It does not leave streaks in the materials of which it is used. Thanks to the special addesante, the action of the product can be in time. INSTRUCTIONS FOR USE: ready to use product. OPEN WITH CAUTION. Mix well. Apply the product with a spatula or palette taking care to leave a layer of at least 3-5 mm SOLVOSIL on the stain to remove. If necessary, the extractive duration of the action can be increased by covering the wrap with a stretchable plastic sheet. Always let the wrap dry and then proceed to its dry-removal nylon brush or broom. Finally rinse with a mild detergent solution (eg. UNIPUL diluted in water). If necessary, repeat the application. Protect the painted and plastic surfaces. YIELD: on average with 1 kg of product it covers about 1-2 square meters of surface.

STRIP RESIL |Decerante universale per pavimenti
STRIP RESIL

Stripper universal quick for floors Product for rapid removal of old films of synthetic waxs. Specific for PVC, rubber and linoleum; can also be used on stone materials. Characteristics and use: stripper/universal sfilmante to fast action to remove old layers of metallic wax and various polymers. It is suitable for all floors but thanks to its specific formulation can be used with safety on the resilient materials without affecting the integrity. Does not contain inorganic alkalis. Does not require acid neutralization nor abundant rinse. Low schiumogeneità. Not releasing unpleasant odors during use and in environments. Instructions for Use: You can use either pure or diluted in water, in function of the typology of the dirt to be removed and the cleaning technique adopted. Spread the product thoroughly wetting the surface and let it act 10-15 minutes. Proceed for small areas (10-15 sqm). Wipe the surface with pads or discs in palstiche fibers. Remove the residues of the dewaxing and go with a clean mop; it is not necessary to rinse. Do not leave to dry the old layers of wax dissolved from the stripper. Consumption: it uses indicatively: Pure: on sizeable accumulations of waxs and polymers. Diluted 1: 4/8 in water: for washings to where it is needed a normal action stripper. Diluted 1: 8/12 in water: deceramenti for superficial. Diluted 1: 12/15 in water: for periodic washings with clothes washing and drying machines.

TIXO Smacchiatore per la rimozione delle macchie di olio e grasso di origine animale e vegetale su materiali lapidei
TIXO

Stain remover for the removal of oil stains and grease of animal and vegetable origin of stone materials Product in alkaline dispersion thickened to remove oils and animal and vegetable fats, drying oils, soot and residues (carbon black) from absorbent stone materials. Particularly suitable for vertical surfaces and / or localized interventions. FEATURES AND USE: on all stone materials (Cotto, Stone, glazed ceramics, clinker, stoneware, cements, grits, etc.). Do not use on wood, linoleum, rubber and PVC. Protect the painted surfaces and anodized aluminum from contact with TIXO. INSTRUCTIONS FOR USE: ready to use: proceed with the application of the product with a spatula or palette taking care to leave a layer of at least 3-5 mm TIXO on the stain to remove. If necessary, the extractive duration of the action can be increased by covering the wrap with a sheet of plastic material (eg. Soft tape or Domopack) so as to slow down the evaporation. Always let the wrap dry and then proceed to its removal Dry with nylon brush or broom. Rinse with an acid solution (eg. DELICACID or VIACEM diluted 1: 1 in water) the acid-resistant materials, while for the most delicate materials only rinse with plenty of water. Check that it is removed and repeat the application if necessary. YIELD: according to the absorbency and the type of material. On average, with 1 kg of product it is covers about 1-2 square meters of surface. 

TOGLIRUGGINE LIQUIDO | Smacchiatore per la rimozione della ruggine dalle superfici in materiale lapideo
TOGLIRUGGINE LIQUIDO

STAIN REMOVER FOR RUST REMOVAL FROM STONE MATERIALS FIELDS OF APPLICATION Specific stain remover for the removal of rust stains and metal oxides surfaces in stone material. CHARACTERISTICS TOGLIRUGGINE LIQUIDO: can be used on all stone materials in general (eg cotto, stone, ceramic and cement). Not being an acidic product, it can be used on precious stone materials such as: polished marbles and travertines, polished grits and slates; removes stains from ferrous contamination (eg rusty ferrous objects); fertilizers based on ferrous sulphate for lawns; it works quickly and leaves no residue. In many cases the removal action takes place in a few minutes (5 - 10 minutes). INSTRUCTIONS FOR USE product ready to use. Proceed with the application of TOGLIRUGGINE LIQUID with a paint brush, taking care to leave a generous layer of product on the stain to be removed. Leave the product to act as long as the reaction to the rust extraction has not occurred successfully (the product will take on a purple color); the time necessary for the reaction depends on the type of material. Don’t let the product to dry on the surface. Once the reaction has occurred, it is advisable to remove the product within 10-15 minutes, rinsing with a slightly alkaline water solution (eg SGRISER diluted 10% in water). Repeat the application if necessary. YIELD: according to the absorption of materials. approximately 1 lt / 6 - 10 m² PACKAGING 0.5 lt - 5 lt VIDEO

UNIPUL | DETERGENTE UNIVERSALE IGIENIZZANTE CONCENTRATO PER SUPERFICI DURE
UNIPUL

UNIVERSAL SANITIZING CONCENTRATED DETERGENT FOR HARD SURFACES FIELDS OF APPLICATION For the extraordinary and ordinary cleaning of all hard surfaces (cotto, stone, cement, ceramic materials, wood, metal, glass and synthetic surfaces). CHARACTERISTICS Concentrated detergent for multifunctional use based on its concentration in water for: remove old blackened and deteriorated surface layers of wax on already treated surfaces; an intensive degreasing cleaning on all hard surfaces; an ordinary cleaning of all surfaces, which does not deteriorate the basic treatment and the material. UNIPUL is an effective product even at low concentrations of use, has a low foaming, does not leave streaks after use and leaves a pleasant scent in the environment. INSTRUCTIONS FOR USE The concentration of use depends on the kind of dirt to be removed. Dosages: Pure or diluted 1 part of UNIPUL in 1 part of water: to perform extraordinary deep cleaning washes on old wax treatments blackened by the accumulation of dirt and to re-move excess maintenance wax, without completely removing the background treatment. Spread UNIPUL on the floor, leave acting for a few minutes and then rub the surface with medium hard pads. Remove the residue and rinse with water. Then apply a coat of anti-dirt and anti-wear finish of IDROFIN. Diluted 1 part of UNIPUL in 3 - 5 parts of water: for washing where an energetic de-greasing action is required on very dirty surfaces: car engines, surfaces and stoves, mechan-ical parts, traces of felt-tip pens, wooden floors, etc. Diluted 30 - 40 cc of UNIPUL in 1 lt of water: for normal dirt in periodic cleaning of un-treated hard surfaces. Diluted 8-10 cc of UNIPUL in 1 lt of water: for the daily cleaning of treated (and not) floor surfaces, cotto, stone, ceramic materials, klinker, wood, washable walls, plastic surfaces, lacquered and painted surfaces (tables, furniture, fixtures, car interiors, linoleum, sanitary ware, glasses. YIELD Depending on the concentration of use. PACKAGING 1 lt -5 lt -10 lt