CHOOSE PRODUCT:

Select your product from the list or search for Type


ECOMARBEC | Detergente sgrassante biodegradabile per pavimenti
ECOMARBEC

Eco-friendly detergent degreasing cleaner Product that disintegrates and solubilizes the greasy dirt, sanitizes surfaces in cotto, stone, cement agglomerate, porcelain stoneware and ceramic material in general. Biodegradable. CHARACTERISTICS AND FIELD OF APPLICATION: cleans, degreases, sanitizes surfaces in cotto, stone, cement, porcelain stoneware and other ceramic materials. It can be used pure or diluted in water for hand and machine washings (ex. scrubber, pressure washer). The product solubilizes greasy substances, making them easily removable. The product is biodegradable. It doesn't contain caustic soda, ammonia, fragrances, dyes and solvents. INSTRUCTION OF USE: - Pure or diluted up to 1:2 parts in water: for strong degreasing washings, to remove large greasy dirt residues (cooking oils, lubrificating oils, fats and stubborn dirt residues). – Diluted 1:20-30 parts in water: (1/2 glass of ECOmarbecdef2 in 5 lt of water): for periodic degreasing washings of the floors. – Diluted 1:80-90 parts in water: (1/4 glass in 5 lt of water): for the daily cleaning of treated and washable floor surfaces. YIELD: it depends on the concentration of use.  

UNIPUL | DETERGENTE UNIVERSALE IGIENIZZANTE CONCENTRATO PER SUPERFICI DURE
UNIPUL

UNIVERSAL SANITIZING CONCENTRATED DETERGENT FOR HARD SURFACES FIELDS OF APPLICATION For the extraordinary and ordinary cleaning of all hard surfaces (cotto, stone, cement, ceramic materials, wood, metal, glass and synthetic surfaces). CHARACTERISTICS Concentrated detergent for multifunctional use based on its concentration in water for: remove old blackened and deteriorated surface layers of wax on already treated surfaces; an intensive degreasing cleaning on all hard surfaces; an ordinary cleaning of all surfaces, which does not deteriorate the basic treatment and the material. UNIPUL is an effective product even at low concentrations of use, has a low foaming, does not leave streaks after use and leaves a pleasant scent in the environment. INSTRUCTIONS FOR USE The concentration of use depends on the kind of dirt to be removed. Dosages: Pure or diluted 1 part of UNIPUL in 1 part of water: to perform extraordinary deep cleaning washes on old wax treatments blackened by the accumulation of dirt and to re-move excess maintenance wax, without completely removing the background treatment. Spread UNIPUL on the floor, leave acting for a few minutes and then rub the surface with medium hard pads. Remove the residue and rinse with water. Then apply a coat of anti-dirt and anti-wear finish of IDROFIN. Diluted 1 part of UNIPUL in 3 - 5 parts of water: for washing where an energetic de-greasing action is required on very dirty surfaces: car engines, surfaces and stoves, mechan-ical parts, traces of felt-tip pens, wooden floors, etc. Diluted 30 - 40 cc of UNIPUL in 1 lt of water: for normal dirt in periodic cleaning of un-treated hard surfaces. Diluted 8-10 cc of UNIPUL in 1 lt of water: for the daily cleaning of treated (and not) floor surfaces, cotto, stone, ceramic materials, klinker, wood, washable walls, plastic surfaces, lacquered and painted surfaces (tables, furniture, fixtures, car interiors, linoleum, sanitary ware, glasses. YIELD Depending on the concentration of use. PACKAGING 1 lt -5 lt -10 lt

DETERBRILL | Detergente concentrato brillanatante per pavimenti cerati
DETERBRILL

Concentrated detergent sparkle cleaner for floors in cotto and stone Concentrated neutral product for the ordinary cleaning of surfaces treated with wax. It sanitizes the surface and keeps the brilliance of the treatment during the time CHARACTERISTICS AND FIELD OF APPLICATION: not aggressive concentrated cleaner to clean floorings in cotto, natural stone, cement agglomerate, that have been treated with waxes. It cleans and sanitizes the surface keeping the brilliance of treatment during the time. It leaves a pleasant odour in the environment of lemon and mint. INSTRUCTIONS OF USE:   Diluted 1: 1-4 parts in hot water: to remove considerable dirt, consisting in the periodic cleaning of the treated surfaces.  Diluted 1: 20-30 parts in water (a glass in 8-10 litres of water): for normal dirt in the periodic cleaning of the treated surfaces.  Diluted 1: 50-60 pieces in water (1/3 of glass in 8-10 litres of water): for the daily washing of the floor treated surfaces. YIELD: it depends on the concentration of use. PACKAGING: 1 lt - 5 lt.

FLORA | Detergente neutro per pulizia dei pavimenti di casa
FLORA

Concentrated detergent cleaner for floors Neutral detergent product for the ordinary cleaning of all hard surfaces: it combines the sanitizing function and the degreasing power. Not aggressive for the materials CHARACTERISTICS AND FIELD OF USE: not aggressive concentrated cleaner to clean floors in cotto, glazed ceramic, porcelain stoneware, natural stone, cement agglomerate, treated wood, synthetic surfaces. Low foaming detergent that leaves a pleasant odour of lavender in the environment. It doesn't leave halos on the surface. FLORA combines the detergent/degreaser action with an efficacious sanitizing function. INSTRUCTIONS FOR USE:     – Diluted 1: 2-4 parts in water: to remove considerable dirt in the periodic cleaning of untreated surfaces.     – Diluted 1: 20-30 parts in water (a glass in 8-10 litres of water): for normal dirt in the periodic cleaning of hard untreated surfaces.     – Diluted 1: 50-60 parts in water (1/2 glass in 8-10 litres of water): for the ordinary cleaning of polished stone surfaces, glazed ceramics, porcelain stoneware, klinker.     – Diluted 1: 80-100 parts in water (1/4 glass in 8-10 litres of water): for the ordinary cleaning of treated floor surfaces. YIELD: it depends on the concentration of use.  

REFIX LUCIDO | Cera di manutenzione dei trattamenti su cotto, pietra e agglomerati cementizi
REFIX LUCIDO

Wax glossy maintenance for floors in stone material  Emulsion product resino-glossy waxy which renews and preserves in time treatment of initial finish on surfaces in cotto, natural stone, grits, cement and clinker, without creating surface films CHARACTERISTICS AND USE: on all types of stone material absorbent (cotto, natural stone, grits, cements, klinker) treated with waxs. Renews and preserves in time the protective features and aesthetic characteristics of the initial treatment without determining the phenomena of peel or wax buildup. Constitutes a micro-resino layer-surface waxy easily cleanable and renewable in routine maintenance by reducing the formation of scratches persistent black and the accumulation of dirt. Leaves no unpleasant odours in the premises. For internal use. Instructions for Use: you normally use pure. Shake well before use. Distribute small amounts of REFIX directly on the clean surface or on a soft cloth and spread the product in thin layer uniformly wetting the surface without leaving excesses. Do not ride roughshod during drying. It is not necessary to repolish. Frequency of use - every 1- 2 months: on the surfaces intensely flouted and subject to severe wear (e.g. shops, public spaces, offices, kitchens, bar, restaurants etc.) - every 3 - 6 months: on the surfaces a moderate use (e.g. salt, inputs, bathrooms). - Every 6 - 12 months: on the surfaces to less wear (e.g. night areas, remittances) Yield: indicatively 1lt / 30 -40 square meters.

REFIX MATT | Cera di manutenzione opaca per pavimenti in cotto e pietra
REFIX MATT

Wax opaque maintenance for floors in stone material Emulsion product resino-opaque waxy which renews and preserves in time treatment of initial finish on surfaces in cotto, natural stone, grits, cement and clinker, without creating surface films CHARACTERISTICS AND USE: on all types of stone material absorbent (cotto, natural stone, grits, cements, klinker) treated with waxs. Renews and preserves in time the protective features and aesthetic characteristics of the initial treatment without determining the phenomena of peel or wax buildup. Constitutes a micro-resino layer-surface waxy easily cleanable and renewable in routine maintenance by reducing the formation of scratches persistent black and the accumulation of dirt. Leaves no unpleasant odours in the premises. For internal use. Instructions for Use: you normally use pure. Shake well before use. Distribute small amounts of REFIX directly on the clean surface or on a soft cloth and spread the product in thin layer uniformly wetting the surface without leaving excesses. Do not ride roughshod during drying. It is not necessary to repolish. Frequency of use - every 1- 2 months: on the surfaces intensely flouted and subject to severe wear (e.g. shops, public spaces, offices, kitchens, bar, restaurants etc.) - every 3 - 6 months: on the surfaces a moderate use (e.g. salt, inputs, bathrooms). - Every 6 - 12 months: on the surfaces to less wear (e.g. night areas, remittances) Yield: indicatively 1lt / 30 -40 square meters.

VIACEM STRONG BUFFERED ACID DESCALING DETERGENT  FOR COTTO AND TERRACOTTA
VIACEM

STRONG BUFFERED ACID DESCALING DETERGENT FOR COTTO AND TERRACOTTA FIELDS OF APPLICATIONS For the descaling wash of cotto and terracotta, quarry tiles, antique cobblestones and all the materials resistant to strong acids. CHARACTERISTICS Strong Buffered Acid Detergent for the descaling and the removal of limestone of acid-resistant materials, from: cinder grouts; salt efflorescences; chalk deposits, also consistent. Compared to the conventional muriatic acid, it exhales less corrosive fumes, it has a greater emulsifying capacity of solid dirt and a more controlled dissolution action. INSTRUCTIONS FOR USE We recommend to do a test on the material to verify the resistance to VIACEM. Pure: on consistent chalk scales and deposits and big cinder grouts; VIACEM diluted one part in water: for the washes where it’s necessary a normal descaling and a limestone removing and for the neutralization of the previous alkaline washes. Lay the product on the surface and let it act, if it’s possible, a few minutes. Scrub the surface with buffers or pads in soft plastic fibres or nylon, tynex or carborundum brushes. Repeat the wash if it’s necessary. Rinse always with a lot of water. YIELD Depending on the dirt to be removed and the absorption of the material: - for energetic washes 1 lt / 3-6 m²; - for normal washes 1 lt / 8-12 m². PACKAGING 1lt -5 lt -20 lt   VIDEO

STRIP RESIL |Decerante universale per pavimenti
STRIP RESIL

Stripper universal quick for floors Product for rapid removal of old films of synthetic waxs. Specific for PVC, rubber and linoleum; can also be used on stone materials. Characteristics and use: stripper/universal sfilmante to fast action to remove old layers of metallic wax and various polymers. It is suitable for all floors but thanks to its specific formulation can be used with safety on the resilient materials without affecting the integrity. Does not contain inorganic alkalis. Does not require acid neutralization nor abundant rinse. Low schiumogeneità. Not releasing unpleasant odors during use and in environments. Instructions for Use: You can use either pure or diluted in water, in function of the typology of the dirt to be removed and the cleaning technique adopted. Spread the product thoroughly wetting the surface and let it act 10-15 minutes. Proceed for small areas (10-15 sqm). Wipe the surface with pads or discs in palstiche fibers. Remove the residues of the dewaxing and go with a clean mop; it is not necessary to rinse. Do not leave to dry the old layers of wax dissolved from the stripper. Consumption: it uses indicatively: Pure: on sizeable accumulations of waxs and polymers. Diluted 1: 4/8 in water: for washings to where it is needed a normal action stripper. Diluted 1: 8/12 in water: deceramenti for superficial. Diluted 1: 12/15 in water: for periodic washings with clothes washing and drying machines.

SGRISER STRONG WAX REMOVER DETERGENT FOR STONE MATERIALS
SGRISER

STRONG WAX REMOVER DETERGENT FOR STONE MATERIALS FIELDS OF APPLICATION For the strong wax removing, degreasing and descaling wash on all stone materials (cotto, stone, glazed ceramics, klinker, gres, cement, grits, etc.). It can be used to clean the joints blackened by the accumulation of dirt in ceramic surfaces. CHARACTERISTICS Strong alkaline-solvent detergent to remove from absorbent stone materials and not: old treatments with oils and waxes in general and some polymeric films (ex. "metal-lized waxes"); lampblack and carbon residues; to facilitate the removal of the '' dark spots '' by sulfation on the cotto; deposits of greasy dirt, darkening of atmospheric pollution, deposits of green algae and molds. It does not leave damaging residues in the absorbent material. It has a strong dispersing and emulsifying power of greasy dirt, facilitating its removal from the surface of the material. It does not leave unpleasant smells during use and in environments. INSTRUCTIONS FOR USE It can be used pure or diluted in water. The concentration of use must be determined in each situation according to the type of dirt, the amount of residues to be removed and the absorp-tion of the materialFor this purpose, preliminary washing tests may be useful. It can be used indicatively: Pure: on substantial residues of oils, waxes, large accumulations of greasy dirt, organic residues and as descaler for "dark spots SGRISER diluted in an equal part of water: for washings where a strong degreasing action is required. Spread the product on the surface and let it act for at least 10 to 20 minutes. Rub the surface with plastic fiber pads or discs or nylon brushes. To remove large oily residues, it may be use-ful to let SGRISER dry on the surface. Do not use equipment made of plant or animal material. Repeat the washing if necessary. On surfaces resistant to acids, neutralize with an acidic aqueous solution with VIACEM or DELICACID. For other more delicate materials, rinse only with plenty of water. YIELD depending on the dirt to be removed and the absorption of the material: for energetic washes 1lt / 4 -8 m²; for normal washes 1lt / 5-10 m². PACKAGING 1 lt - 5 lt - 20 lt

METAL STRIP - Decerante rapido per cere metallizzate su materiali lapidei
METAL STRIP

Quick wax remover cleaner for stone materials Product alkaline wax remover for the quick removal of old layers of synthetic/matallic waxes  and various polymers. It does not contain caustic soda; low foaming. FEATURES AND USE: for stripper-strong sfilmante washing of all stone materials (Cotto, Stone, glazed ceramics, clinker, stoneware, cement, grits, etc.). No need for acid neutralization. It leaves no odor during use and environments; low schiumogeneità. Do not use on wood, linoleum, rubber and PVC. Protect the painted surfaces and anodized aluminum from contact with METAL-STRIP. INSTRUCTIONS: can be used pure or diluted in water. Pure: on thick accumulations of waxes and polymers. Diluted 1: 4.8 in water for washing where a normal wax remover action is necessary. Diluted 1: 15.10 in the water: for periodic washing with scrubbers. Apply the product wetting the surface thoroughly and let it act 5/10 minutes. Proceed for small areas (10-15 square meters). Scrub the surface with pads or discs in plastic fibers. Remove residues of the dewaxing and rinse with water. Do not let dry the old layers of wax dissolved by the stripper. CONSUMPTION: for energetic washes 1 lt / 4-8 sqm; for normal washes 1 lt / 10-15 sqm.   VIDEO

SOLVALL - Pulitore solvente sfilmante per pavimenti e rivestimenti in materiale lapideo
SOLVALL

Solvent cleaner sfilmante for stone materials solvent product to slow evaporation to a deep sfilmante action on stone materials. Leaves no unpleasant odours. Characteristics and use: for washing the dissolver sfilmante on all the stone materials (brick, stone, ceramic, klinker, stoneware, cement, grit, etc.) excluding materials descrambled with polymeric binder and wood. Compared to conventional solvents (e.g. nitro, acetone, turpentine) has a lower rate of evaporation and an action dissolutrice deeper. Leaves no unpleasant odours during use and in environments. Instructions for Use: always use pure. Spread the product on the surface and leave it to act, if possible, at least 15-30 minutes (up to a maximum of 8-12 hours). Wipe the surface with pads or discs in plastics fibers or with brushes made of nylon. Emulsify with water and remove the residue. Protect all painted surfaces and plastic material from contact with SOLVALL. Yield: to remove substantial polymeric residues 1 lt / 4-8 sqm; for normal washings 1 lt / 8-12 mq.

PULITORE FC | Pulitore per la rimozione dello smog dalle facciate
PULITORE FC

Cleaner for removal of smog facades Product which quickly removes oily substances, fat deposits from air pollution, guano. Easily applicable also on vertical surfaces. Characteristics and use: for the decrusting washing-degreaser strong on all the stone materials (brick, stone, stoneware, cement, etc.). Thanks to its viscosity can be easily applied on vertical surfaces. Instructions for Use: It uses pure. Spread the product on the surface and leave it to act at least 10-20 minutes. Wipe the surface with pads or discs in plastics fibers or with brushes made of nylon. Do not use the equipment in the plant material or animal. Always rinse with plenty of water. On the materials very porous is recommended neutralize CLEANER FC with dilute acid (es. Solution 1:10 Of DELICACID). Protect the painted surfaces and in anodized aluminum from contact with the cleaner FC. Yield: on average 1 lt / 4-8 sqm.

DESOLF 4 - Pulitore desolfatante in polvere per pietre e materiali lapidei
DESOLF 4

Desulphating powder for stone materials Product for removal of calcium sulphate (calcite) screeds on stone materials. CHARACTERISTICS AND USE: for decking on all absorbent stone materials (Cotto, Pietra, Gres, Cement, etc.), even delicate. It dissolves the "dark spots" on the Cotto and the "black crusts" outside on the surfaces of limestone materials in polluted atmospheres. Removes copper oxide residues. INSTRUCTIONS FOR USE: dilute the powder with water and mix until a paste is made (for a medium thick wrap, dilute one part by weight of powder in two parts of water). Do not use metal containers. Apply the product with a spatula or plastic pallet, taking care to leave a 2-3 mm thick layer of DESOLF4 on the stain to be removed. On too absorbent materials, cover the treated surface with a sealant film. Allow the wipe to dry before removing it with nylon brush or sage. Finally rinse with plenty of water. YIELD: On average, 1 kg of prepared dough (corresponding to about 300 grams of powder) covers about 1 square meters of surface.

MICRONET | Detergente intensivo per materiali lapidei microporosi
MICRONET

INTENSIVE DETERGENT FOR MICROPOROUS STONE MATERIALS FIELDS OF APPLICATION For the extraordinary cleaning and the removal of dirt caused by trampling, even the most stubborn, from microporous stone materials, such as: porcelain tiles, ceramic, quarry tiles, polished stones and agglomerates. CHARACTERISTICS Concentrated detergent based on inorganic salts, ideal for: the deep cleaning of surfaces in porcelain tiles, ceramic, klinker, polished stones, cement or synthetic agglomerates. It removes stubborn dirt, penetrated into the microporosity of the materials. Excellent for joints cleaning between ceramic tiles, blackened by accumulated dirt. Low foaming. It does not leave halos. INSTRUCTIONS FOR USE The concentration of use depends on the type of dirt to be removed: Pure or diluted 1 part of MICRONET in 1 part of water: for the removal of stains and stubborn dirt. Pour the product on the stain or on the surface, wait a few minutes and wipe with pads or soft disks for floor scrubber. Remove the residue with wet vacuum or dry cloth. Finally rinse the surface with a diluted acid solution, to remove the residues (eg solution 2 - 5% of DELICACID). Dilute 50cc - 100cc of MICRONET in 1 liter of water: for extraordinary washing of surfaces. Pour on the surface to be cleaned, leave to act for a few minutes and wipe with buffers or soft disks for floor brush until the dirt is removed. Remove residue and dirt with wet vacuum or soft cloth and then rinse with water. On some materials (polished or smooth surfaces) it may be useful to clean again the surface with a clean damp cloth. Dilute 10cc - 100cc of MICRONET in 1 liter of water: for the ordinary cleaning of highly trampled floors, with washer-dryer machine. YIELD Depending on the concentrations of use. PACKAGING 1lt-5lt  

IDROTON - Protettivo idrorepellente tonalizzante per materaili lapidei coem : cotto, pietra e cemento
IDROTON

Water-repellent protective wet effect for stone materials on the basis of water produced for the anti-degradation to tonalizzante effect of stone materials in the medium-high absorption laid on the inside and the outside. Characteristics and use: on all types of stone materials in the medium - high absorption (stone, terracotta, grit, etc.). Specific for all stones with surface machining coarse sand blasted, scratched, flaming, tumbled, honed, etc.). For interior and exterior. Leaves no surface films. Instructions for Use: Shake before use. Spread IDROTON with spandicera fleece, soft cloth, sponge homogeneously wetting the surface. During drying, blot any excess before drying. In the case of excess dried on the surface and remove them by polishing with hard red or white with single-brush scrubber or rehearsing a cloth moistened with IDROTON on the material. Just dry (1 - 2 hours) apply the second hand (where necessary) proceeding in the same manner as for the first. To avoid that the surfaces just treated are wet from rain before 8-12 hours from the application. Do not apply on surfaces exposed to the sun or too hot (application temperature 5°- 30°C). Yield: Normally 1 lt / 6-15 mq.

IDROWIP WATER-REPELLENT PROTECTIVE WATER BASED FOR STONE ABSORBENT MATERIALS
IDROWIP

WATER-REPELLENT PROTECTIVE WATER BASED FOR STONE ABSORBENT MATERIALS FIELDS OF APPLICATION For the water-repellent treatment of absorbent stone materials: cotto, brick, Natural stone with high absorption, cement, Mineral plaster in interior and exterior. CHARACTERISTICS Protective impregnator with exceptional penetration and diffusion capacity within the porosity of absorbent stone materials. It forms a water repellent chemical barrier which: it avoids and contrasts the rising damp (and consequently the formation of salt efflo-rescence, crusts, patinas, algae, etc.); blocks and reduces water absorption (ex. rains, water-soluble substances, cement grouts, etc.); has high chemical inertia and resistance to atmospheric agents; -does not alter the appearance of the material; does not form superficial films. On highly absorbent materials it is recommended to apply the product in the phases prior to laying or grouting the material, in order to protect the surface and facilitate and speed up the subsequent processing steps. Water based product without specific danger and toxicity for the user and the environment. The protection given to the absorbent material by IDROWIP, applied as instructed, maintains the permeability to the original water vapor (determination according to NORMAL 21/85) reducing it to a value <20% depending on the type of material (non-filmogenic protection with high permeability to vapor). I NSTRUCTIONS FOR USE It can also be applied on uniformly damp surfaces. Shake before using. It can be applied by spray (recommended) or cloth, sponge, fleece to spread wax, rag, evenly wetting the surface to be treated, following the absorption of the mate-rial. Redistribute any excesses on the material with a cloth during the drying phase. Normally it dries in 4 - 8 hours depending on the aeration. During the wet and cold season and in closed or poorly ventilated rooms, the drying time can be considerably longer. It is applied to saturation of the material: 1 coat: on medium-low absorption materials; 2 coats: on high absorption materials. The application of the second coat must be carried out as soon as the first one has been absorbed and without waiting for the surface to dry (“wet on wet”). The other treatment products can be applied, where required (other anti-stain protective products, wax finishers, etc.). Wash the equipment with water before drying the product. Avoid that the surfaces just treated are wet from rain before 12 hours. YIELD Depending on the the absorption of the materials: - on poorly absorbent material 1 lt / 8 - 15 m²; - on very absorbent material 1 lt / 4 - 8 m². PACKAGING 1 lt - 5 lt - 20 lt.

SILOX 6 | Impregnante protettivo anti-umidità di risalita per pavimenti, rivestimenti e pareti
SILOX 6

Water-repellent protective for stone materials produced for the protection of the antidegrado terracotta, stone and cement in the inside and the outside. Characteristics and use: on all the stone materials absorbing (terracotta, stone, marble, granite, cement agglomerates, etc.) laid in interior and exterior. Does not change the appearance and the color of the material, does not form the surface film. Instructions for Use: Use only on surfaces perfectly dry. Apply by spraying, fleece, brush or with a soft cloth uniformly wetting the surface to be treated until saturation following absorption. Dab well any excesses and drippings during the drying stage. The application of any second hand must be carried out ("wet on wet") as soon as the first is dry on the surface. Protect or prevent the surfaces just treated are wet from rain before 8-12 hours from the application. Do not apply on surfaces too hot (> 30°C). Yield:  on marbles, granites and other materials little absorbent 1 lt / 15-20 mq; on stone, terracotta "Tuscan type", cements 1 lt / 10-15 mq; on plasters, terracotta and stone highly absorbent 1 lt / 4-8 sqm.

TIM Anti-humidity and anti-stain protective for absorbent stone materials
TIM

WATER AND OIL REPELLENT PROTECTIVE WATER BASED FOR STONE ABSORBENT MATERIALS FIELDS OF APPLICATION For the anti-humidity and stain-resistant treatment of absorbent stone materials: cotto, brick, Natural stone with high absorption, cement, Mineral plaster in interior and exterior. CHARACTERISTICS Protective impregnator with exceptional penetration and diffusion capacity within the porosity of absorbent stone materials. It forms a water repellent chemical barrier which: it avoids and contrasts the rising damp (and consequently the formation of salt efflorescence, crusts, patinas, algae, etc.); blocks and reduces water absorption (ex. rains, water-soluble substances, cement grouts, oils, fatty substances etc.); has high chemical inertia and resistance to atmospheric agents; does not alter the appearance of the material; does not form superficial films. On highly absorbent materials it is recommended to apply the product (diluted 50% in water) in the phases prior to laying or grouting the material, in order to protect the surface, facilitate and speed up the subsequent processing steps. Water based product without specific danger and toxicity for the user and the environment. The protection given to the absorbent material by TIM, applied as instructed, maintains the permeability to the original water vapor (determination according to NORMAL 21/85) reducing it to a value <20% depending on the type of material (non-filmogenic protection with high permeability to vapor). INSTRUCTIONS FOR USE It can also be applied on uniformly damp surfaces. Shake before using. It can be applied by spray (recommended) or cloth, sponge, fleece to spread wax, rag, evenly wetting the surface to be treated, following the absorption of the material. Redistribute any excesses on the material with a cloth during the drying phase. Normally it dries in 4 - 8 hours depending on the aeration. During the wet and cold season and in closed or poorly ventilated rooms, the drying time can be considerably longer. It is applied to saturation of the material: 1 coat: on medium-low absorption materials; 2 coats: on high absorption materials. The application of the second coat must be carried out as soon as the first one has been absorbed and without waiting for the surface to dry (“wet on wet”). The other treatment products can be applied, where required (other anti-stain protective products, wax finishers, etc.). Wash the equipment with water before drying the product. Avoid that the surfaces just treated are wet from rain before 12 hours. YIELD Depending on the the absorption of the materials: - on poorly absorbent material 1 lt / 8 - 15 m²;                                              - on very absorbent material 1 lt / 4 - 8 m². PACKAGING 1 lt - 5 lt - 20 lt VIDEO

TON 25 | Protettivo anti umidità di risalita , antimacchia per pietra, cotto e cemento
TON 25

Protective water and oil repellent in water-based toning for absorbent stone materials Product for stain protection against deterioration of stone, terracotta and absorbent cement agglomerates laid in interior and exterior. It intensifies the color of the material, does not create films and leaves a natural appearance to the material. FEATURES AND USE: on all types of absorbent stones (natural stones, Cotto, grits, etc.). Specific for all the stones with coarse surface processing (sandblasted, scratched, flamed, tumbled, polished, etc.). For indoor and outdoor. Leaves no surface film. INSTRUCTIONS FOR USE: Shake before use. Spread TON 25 with spreader fleece, soft cloth, sponge wetting the surface homogeneously. During drying dab any excess before drying. You need 1-2 steps depending on the absorption of the material. In the case of dried and excesses on the surface, remove them by rubbing with red or white disc with single-brush or rehearsing a moistened cloth TON 25 on the material. Just dry (1-2 hours) apply a second coat (where necessary) proceeding as for the first. Do not use on hot surfaces (> 30 ° C). YIELD: on medium-absorbing material 1 lt / 8-12 square meters; on very absorbent material 1 lt / 4-8 m².

EXCEL PLUS | Protettivo antimacchia per materaili lapdie assorbenti
EXCEL PLUS

Protective oil repellent in water-based absorbent stone materials Product for the stain protection of absorbent stone materials in interior and exterior. It forms an invisible protection. FEATURES AND USE: on all kinds of brick, stone and concrete with high absorption placed inside and outside the outer. It does not significantly alter the appearance and behavior of the material color tone. It forms an invisible protection. INSTRUCTIONS: Shake before use. It can be applied by spraying, with spreader fleece, with a brush, with soft cloth or sponge as needed, uniformly wetting the surface to be treated. Dab any excess during the drying phase. Normally it dries in 1-2 hours. On very absorbent materials it may be necessary to apply two coats of product. YIELD: Normally 1 lt / 6-10 sqm.

IDROFIN MATT FINITORE OPACO ANTI-SPORCO, ANTI-USURA  IN ACQUA PER MATERIALI LAPIDEI
IDROFIN MATT

MATT ANTI-DIRT ANTI-WEAR FINISHER WATER-BASED FOR STONE MATERIALS FIELDS OF APPLICATION For the final matt finish of treatments on absorbent stone materials placed inside: cotto, brick, natural stone with high absorption, cement, mineral plaster. CHARACTERISTICS IDROFIN: is a low-film anti-dirt and anti-wear finisher for absorbent stone materials placed inside; protects the hydro-oil repellent protectors from wear; does not alter the appearance of the material and does not form a thick film on the surface, leaving a good vapor permeability to the material; it forms on the material a resin-waxy micro-layer easy to apply, which reduces the penetration of dirt and makes the surfaces easier and faster to clean; easy to maintain over time with the REFIX MATT maintenance product. INSTRUCTIONS FOR USE normally it is used pure. Shake well before use Application types: 1 hand: on smooth and poorly absorbent surfaces; 2 hands: on rough surfaces. The product is distributed with fleece wax spreader, soft cloth or sponge. It should be spread in a thin layer, homogeneously wetting the surface and without making excesses. It dries quickly, generally in 2-3 hours in well-ventilated areas. Apply the second coat as soon as the first one is dry. YIELD  Depending on the absorption of materials. on materials with rough surfaces 1 lt / 10-18 m²; on materials with polished surfaces 1 lt / 20-30 m². PACKAGING 1 lt -5 lt -20 lt   VIDEO

ANTISTIAN
ANTISTAIN

Protective fluorinated oil repellent for stone materials Impregnating product antistain/antigraffiti for universal use on any type of stone material placed in the inside and the outside. Characteristics and use: on all the stone materials absorbents such as terracotta, stone, cement agglomerate, ceramic flooring and wall coating in the inside and the outside. Facilitates the cleaning up of the absorbent material from dirt and stains. Does not alter the appearance and the color tone of the material. Does not form surface films and form an invisible protection. Instructions for Use: Ready to use. Apply the product on dry surfaces. ANTISTAIN applies to spray or brush (on small surfaces), distributing it evenly on the surface up to create a "veil" wet. Blot any excess during the drying stage. Do not rub decidedly in order to avoid the formation of foam. Any excess product after drying must be removed massaging with a cloth moistened with ANTISTAIN the surface. Normally dries in 1-2 hours in function of aeration. Yield:  - on marbles, granites, klinker and other materials little absorbent 1 lt / 15-20 mq; - on cooked,stones, grits, cements and other absorbent materials 1 lt 6-10 mq.

OIL WET | Impregnante ad effetto bagnato per materiali lapidei
OIL WET

Impregnating wet effect for stone materials Protective low viscosity concentrate impregnating and solvent-free impregnating agent to give the wet effect to absorbent stone materials. It can be used on stones, marbles, granites, granules, synthetic agglomerates, terracotta and cement artifacts, both inside and outside. CHARACTERISTICS AND USE: hydro-oil-repellent and toning impregnating agent for performing "strong wet" treatments on absorbent materials. Saturate the porosity of the stone material without leaving superficial polymer films. The protection retains significant vapor permeability and does not spit or spell. Odorless product. A stable UV product. Resistant to atmospheric agents and microorganisms (algae, molds, etc.). Due to its low viscosity and moderate drying speed it is easy to apply on any substrate. OIL-WET forms permanent and non-reversible protection on the material. It is always advisable to carry out preliminary tests on the off-work material. INSTRUCTIONS FOR USE: apply only on surfaces perfectly dry and clean by dirt, oils and greases and residues of previous treatments. The product can be used as it may or may be diluted up to 1: 1 with DILUOIL. Distribute OIL-WET with a brush / soft cloth / sponge / spool (depending on the support) by homogenously wetting the surface and absorbing the material. After 10-15 minutes, buffer any excess product that is not absorbed by rubbing the surface with a soft cloth or disc. Wait at least 30 minutes before applying a subsequent product step. Normally OIL-WET is applied in 1-2 hands depending on the absorption of the support. Only on very absorbent and rough materials may be necessary to apply a third hand. OIL-WET Dries after 24 hours. The product accepts any finishing products (IDROFIN, LUXOR, PAV-05, etc.) YIELD: - on very rough and absorbent materials 1 lt / 8-12 sqm - smooth and slightly absorbent materials 1 lt /> 20 sqm

PALLADIUM | Impregnante protettivo oleo-ceroso tonalizzante per cotto e pietre
PALLADIUM

Protective oleo-waxy with wet effect for terracotta and stone Product for finishing stain release and to wear of brick and stone sanitary cutlery inside. Enhances the color of the material without causing yellowing. Characteristics and use: for stone surfaces (excluding those polished), cotto and cement agglomerates. Physical characteristics. It does not form the surface film. For internal use. Instructions for Use: Shake before use. Distribute palladium with spray or brush homogeneously wetting the surface following the absorption of the material. After drying (at least 6-10 hours under conditions of good aeration) or in any case as soon as the surface is dry to touch, polish with soft cloth or with soft brush, or apply a second coat by completing the saturation of the material and polish after drying. Yield: -On compact stones 1 lt / 15-25 mq; -cooked on a low absorption 1 lt / 10-12 mq; - on absorbent stones or with rough surface and terracotta high absorption 1 lt / 6-10 mq.

TUSCANIA OIL | Protettivo impregnate oleo ceroso con effetto bagnato per cotto e terracotta.
TUSCANIA OIL

Impregnant oleo-waxy with baganto effect for cotto floors internal protection Product antistain to "wet effect" of terracotta in the inside and the outside. Saturates the porosity of the material without leaving surface films. Characteristics and use: on all surfaces in terracotta in the inside and the outside. Does not form surface films. Do not browse nor spellicolamenti creates. Can be used to impregnate the wood (e.g. ceiling with wood and terracotta). Instructions for Use: Shake TUSCANIA-OIL before use. Apply only on dry surfaces. Distribute TUSCANIA-ILO with spandicera fleece or brush uniformly wetting the surface following the absorption of the material. After about 30 minutes uniform absorption of Tuscania-oil by removing the excess of product from the surface by wiping with a cloth or soft brush. After drying (at least 8-12 hours) apply a second coat by operating as above. Finally, polish with soft cloth or with soft brush just dry (generally 12-24 hours). TUSCANIA-oil can be pigmented with OILTONER. Yield: On Tuscan terracotta 1 lt / 12-18 mq; on clear terracotta or cooked handmade 1 lt 5-10 mq

WET OUT | Impregnante con effetto bagnato per pavimenti in cotto e pietra esterni
WET OUT

Impregnant oleo-waxy for wet effect for stone materials outside Impregnating product water repellent and stain resistant to treatment to wet effect of surfaces in terracotta and stone placed outside CHARACTERISTICS AND USE: water-repellent impregnating and stain resistant oleo-waxy for the treatment for wet effect of surfaces in terracotta and stone placed outside. The presence of fluorinated components in the product ensures a high resistance to atmospheric agents. Saturates the porosity of the material without leaving a thick and rigid surface films; does not create spellicolamenti. Dries more rapidly than the cooked linseed oil without creating tone differences. The product can be easily restored in time through the application of a new step of wet out and without the need for onerous recoveries. Instructions for Use: Shake wet out before use. Apply only on dry surfaces. Dilute with AGRUMOIL DILUOIL or. On materials with a high absorption are necessary 2 steps of impregnating saturarne for porosity. Distribute wet out with spandicera fleece or brush uniformly wetting the surface following the absorption of the material. After 30-60 minutes uniform absorption of wet out by removing the excess of product from the surface by wiping with a cloth or soft brush. After drying (at least 4-6 hours) apply a second coat by operating as above. Finally, polish with soft cloth or with soft brush just dry (generally 12-24 hours). Can be pigmented with OILTONER. Yield: On Tuscan terracotta 1 lt / 12-18 mq; on clear terracotta or stone highly absorbent 1 lt / 5-10 mq.

PRIMAMANO NEUTRA - Primer protettivo anti-spolvero in base acqua per cotto e cemento
PRIMAMANO NEUTRA

Leveling anti-dust protection for stone materials Product resin-wax emulsion for the treatment of leveling down of terracotta materials, stone and concrete laid inside. Wicks the material and eliminates dusting. FEATURES AND USE: on all kinds of medium-high absorption stone materials with as stones, Cotto, cement, mineral plasters. As absorption leveling down and stain in wax treatments. Specifically as anti-dusting protection and surface riaggregante for decoesi materials. For indoor. INSTRUCTIONS: using pure or diluted in water. Apply with fleece applicator (floor), soft cloth, sponge, brush (very rough surfaces only). It should be spread in a thin layer wetting the surface homogeneously and without excesses. It dries quickly, usually in 1-2 hours. On difficult surfaces wettability (ie. Above the water-repellent or stain protection) rub the product on the surface facilitating even application. YIELD: as a provision of cooked very absorbent 1 lt / 6-10 square meters; as dusting 1 lt / 8-15 sqm.

PRIMAMANO RAVVIVANTE - Primer protettivo anti-spolvero in base acqua per cotto e cemento
PRIMAMANO RAVVIVANTE

Anti-dusting protective leveler for stone materials Resin-ceramic emulsion product for high-adhesion base material. Reassemble dusty surfaces avoiding dusting. It tones the surface without altering its color. It does not contain solvents. For inside. CHARACTERISTICS AND USE: on all types of medium-high absorption stone materials such as Stones, Cotto, Cement, Mineral Plasters. As a smoothing absorbing base and stain-resistant in waxy treatments. Specific as anti-dump and replenishing surface protection for decoese materials. For inside. INSTRUCTIONS FOR USE: Use pure or diluted in water. Applies with spool (floor) fleece, soft cloth, sponge, brush (only on very rough surfaces). PRIMAMANO RAVVIVANTE should be laid in thin layer by homogenously wetting the surface and without making excess. Dry quickly, generally in 1-2 hours. On surfaces that are difficult to wet (eg on water repellent or stain resistant), rub the product onto the surface, making it evenly worn. YIELD: As a base on cooks very absorbent 1 lt / 6-10 sqm; As anti-dust 1 lt / 8-15 mq.

ROYAL WAX - Finitore ceroso in pasta per cotto fatto a mano
ROYAL WAX

Finisher waxy concentrate for handmade terracotta Product in paste wax solvent, specific for the cooked rough surface finish such as handmade terracotta. Excellent filling capacity, makes bright the surface and facilitates maintenance. FEATURES AND USE: on all types of Cotto "handmade" placed inside. INSTRUCTIONS: on the pavements, apply ROYAL WAX in small doses with a brush or brush on a few square meters of surface and distribute the product immediately with brush equipped with soft brushes Tampico without creating excess. After drying, polish the surface with hard or soft woolen cloth. YIELD: about Cotto "handmade" 1 lt / 8-15 sqm.

ONIX ! Finitore ceroso concentrato per materiali lapidei assorbenti a superficie ruvida
ONIX

Wax finishing concentrate for stone materials absorbing a rough surface Product protective cream in solvent based waxs in fine dispersion for the waxy finishing of terracotta and stone laid inside. Practical Application, it dries quickly and has a strong water repellency. Characteristics and use: on all types of natural and artificial stone materials absorbing (cooked, terracottas, absorbent stones, etc.) inside. Its fluidity, even at low temperatures, allows an easy and quick application without creating accumulations. Instructions for Use: Shake or mix ONIX before use. On the pavement, spread ONIX with brush/flat brush or sprayer on limited areas and distribute the wax immediately in a homogeneous manner with single-brush scrubber provided with brushes in Tampico soft, avoiding excesses. After drying (usually 4-8 hours), lucidarla with soft disc/nylon brush. Generally it is sufficient for the application of a coat of ONIX. ONIX can be pigmented with OILTONER mixing until the complete and homogeneous dispersion of the pigment. Yield:  on materials with high absorption and rough surfaces 1 lt / 12-20 mq; on materials in the medium absorption 1 lt / 20-30 sqm.

UNICO | Prodotto per il trattamento antimacchia e antisporco per pavimenti in cotto e pietra. Ideale per il fai da te
UNICO

Stain-resistant, anti-dirt for stone materials Water based resin-wax emulsion ideal for the DIY treatment of absorbent stone materials inside. CHARACTERISTICS AND USE: Shiny resin-ceramic emulsion for the treatment of interior stone materials with excellent sealing and stain resistance, anti-dirt and anti-wear properties. It leaves the material good vapor permeability. Can be used on all types of terracotta, natural stones, cements, granules, synthetic agglomerates (floor and lining) laid out internally. Not suitable for the treatment of polished surfaces (eg marble, granite) and ceramic materials (eg porcelain stoneware). INSTRUCTIONS FOR USE: Usually it is used pure on dry material. Shake ONLY before use. Types of application: 3-4 hands as a unique treatment product. The product is distributed with a spatula, cloth or sponge. It should be laid in thin layer by homogenously wetting the surface and without making excess. Apply the following hands as soon as the previous one is dry. UNICO Dries quickly, generally in 2-3 hours in well-ventilated environments. YIELD: generally 1 lt / 6-10 sqm.

FLACONE-1LT-IDROFIN-LUCIDO-ITALIANO-SITO.png
IDROFIN LUCIDO

SHINY ANTI-DIRT ANTI-WEAR FINISHER WATER-BASED FOR STONE MATERIALS FIELDS OF APPLICATION For the final shiny finish of treatments on absorbent stone materials placed inside: cotto, brick, natural stone with high absorption, cement, mineral plaster. CHARACTERISTICS IDROFIN: is a low-film anti-dirt and anti-wear finisher for absorbent stone materials placed inside; protects the hydro-oil repellent protectors from wear; does not alter the appearance of the material and does not form a thick film on the surface, leaving a good vapor permeability to the material; it forms on the material a resin-waxy micro-layer easy to apply, which reduces the penetration of dirt and makes the surfaces easier and faster to clean; easy to maintain over time with the REFIX LUCIDO maintenance product. INSTRUCTIONS FOR USE normally it is used pure. Shake well before use Application types: 1 hand: on smooth and poorly absorbent surfaces; 2 hands: on rough surfaces. The product is distributed with fleece wax spreader, soft cloth or sponge. It should be spread in a thin layer, homogeneously wetting the surface and without making excesses. It dries quickly, generally in 2-3 hours in well-ventilated areas. Apply the second coat as soon as the first one is dry. YIELD  Depending on the absorption of materials. on materials with rough surfaces 1 lt / 10-18 m²; on materials with polished surfaces 1 lt / 20-30 m². PACKAGING 1 lt -5 lt -20 lt   VIDEO

POLIFIN | Finitore anti-sporco anti-usura per pavimenti in materiale lapideo
POLIFIN

Waterproof and anti-wear finisher for stone materials Produced in high gloss resistant resinous emulsion. Particularly suitable for finishing smooth surface materials. CHARACTERISTICS AND USE: on all types of interior stone materials (cooked, natural stones, granules, cements, clinkers) especially on polished or polished finishes. Also suitable for resilient materials (PVC, Linoleum). INSTRUCTIONS FOR USE: Usually it is used pure. Shake before using. The product is distributed with a spatula, cloth or sponge. It should be laid in thin layer by homogenously wetting the surface and without making excess. Apply the second coat as soon as the first is dry. POLIFIN can also be distributed with a spray-buffing technique with a single-disc brush (speed up to 400 rpm) with medium hardness disk, especially on polished surfaces. Dry quickly, generally in 2-3 hours in well-ventilated environments. YIELD: - On rough surface materials 1 lt / 15-18 mq; - On smooth surface materials 1 lt / 25-50 sqm.

PAV 05 | Finitura protettiva anti-vegetativa per pavimenti in cotto, pietra e cemento esterni
PAV05

Anti-vegetative protective finish for external stone materials Product emulsion resin-wax resistant to atmospheric agents for the baked finish, stone, concrete conglomerates, laid outdoors. FEATURES AND USE: on absorbent stone materials (Cotto, Stone, Concrete) placed outside. It promotes the cleanability of the floorings exposed to the outside. It drastically reduces the growth of algae on surfaces. Always use a primer on water and oil repellent (eg. TIM-TON 25-IDROTON). INSTRUCTIONS: it is used pure or diluted in water. Apply with fleece applicator (floor), soft cloth, sponge, brush (very rough surfaces only). It should be spread in a thin layer wetting the surface homogeneously and without excesses. It dries quickly, usually in 1-2 hours. In general, it is sufficient only one hand; on materials with very rough surfaces it can be useful to a second passage. Protect or avoid that the surfaces are treated just wet from rain before 6-8 hours after application. Do not apply on hot surfaces in the hours in strong sunlight, on a windy day, or at temperatures below 5 ° C. YIELD: indicatively with 1 lt / 8-14 sqm.

ACQUABLOCK | Protettivo consolidante anti-infiltrazioni per pavimenti e rivestimenti in materiale lapideo
ACQUABLOCK

Consolidating, anti-infiltration for stone materials Product that penetrates into the material and forms an invisible chemical barrier, drastically reduces water absorption capacity and eliminates infiltration from cracks. Ideal for waterproofing joints. Do not film. CHARACTERISTICS AND USE: on all absorbent stone materials (Terracotta, Stones, Cement, Clinker and Stoneware, etc.). Ideal for waterproofing floor joints in the outside. It water-repels the surface and restores the original cohesion of decoese materials. ACQUABLOCK eliminates water infiltration from artifacts caused by cracks and cracks up to 1.5 mm wide. It has excellent resistance to aging. It does not yellow. INSTRUCTIONS FOR USE: The product is used pure on dry and clean material. Apply by spray or brush by uniformly wetting the surface to be treated until saturation, following absorption. Insist on joints and cracks. After 5-10 minutes completely remove the product not absorbed by the material, rubbing the surface with a soft cloth or absorbent paper. The application of any second hand must be carried out ("wet on wet") as soon as the first is dry on the surface. ACQUABLOCK dries in 6-8 hours. Protect or prevent the newly treated surfaces from being wet by rain before 24 hours of application. YIELD: On stones, cooked "Toscano type", cements 1 lt / 10-15 sqm; On plaster, plaster and very absorbent stones 1 lt / 4-8 sqm.

RE-BLOCK | Consolidante per materiali lapide
RE-BLOCK

Consolidant for stone materials in a solvent base Description: consolidating solvent solution of ethyl silicate. Fields of application: for all materials of natural stone laid in Interior and exterior. Can also be used on other stone materials absorbents (e.g. plaster, stucco, terracotta). Performance: penetrates and spreads to capillarit inside the absorbent material. Thanks to the reaction of ethyl silicate and water of atmospheric humidity will form a silica gel that hardening gives greater mechanical resistance of the material. The transformation and hardening of silica gel is accomplished in approximately 15 days at 20 C and 50% RH For these characteristics ideal for consolidating REBLOCK decoesionate stones from weathering and restoration plasters precious murals. REBLOCK does not contain hydrophobic additives. Instructions for use: the product uses pure generally; If required it can be diluted with the solvent DILUOIL. REBLOCK applies to spray, brush or dip. The main requirement for the success of consolidating treatment what this product soak completely altered the surface layer and reaches the healthy layer of material inside avoiding the formation of harmful surface crusts. For this purpose it is advisable to make the material by impregnation for small areas by applying REBLOCK extra wet-on-wet times up until the material no longer able to receive the product. After 2-3 weeks after surgery to check if have reached the optimal consolidating effect and if necessary repeat the procedure. On some materials may be useful to wash the surface immediately after applying the product DILUIOL REBLOCK to avoid unwanted whitening caused by ethyl silicate drying on the surface of the material. Consolidated materials with REBLOCK (after about a month) can be subsequently treated with waterproofing protectives (es. TIM, SILOX6) or painted with mineral paints (siloxane, silicates, etc.).

DEOSSIDA | Pulitore smacchiatore della patina d'invecchiamento delle pietre
DEOSSIDA

Stain remover for oxidation patinas on stone materials  Concentrated powderd extractor for the removal of oxidation patinas from stone materials exposed to weathering, renewing the look. It’s the ideal for extractive compresses, for a long and deep removal of rust stains and metallic oxides, penetrated in stone materials. RETROCHARACTERISTICS AND USE: Deossida is a specific extractor for compresses. We can use it for a deep removal of oxidation patinas caused by the ageing process of the material, rust stains, other metallic oxides for surfaces, stones, terracotta, cement, cinder and synthetic agglomeration and other stone sorbent materials, except calcareous stones with shiny surfaces (ex. Marble). INSTRUCTIONS FOR USE: knead with water before the use and mix until it forms a paste. Apply the product with a spatula, taking care to leave a coat of 2-3 mm of DEOSSIDA on the surface to clean. In case of removal of stains we recommend, if necessary, to cover the compress with a sheet of plastic (ex. film), to retard water evaporation. Leave drying the compress before of his dry removal with a nylon or sorghum brush. At the end rinse with a lot of water. If necessary, repeat the application. YIELD: on the average with a 1kg of paste (about 300 gr of dust) we can cover about 1mq of surface. PACKAGING: 250gr - 1kg

OILTONER - Pigmento idro-solubile per i prodotti. Palladium, Tuscania-oil, Ultraton, Tiroil, Olio 41, CArezza plus, Royal wax. Ver.bianco, nero, giallo, castagno, noce, rosso
OILTONER

Pigments in oil-soluble dispersed Description: waste oil-solvent soluble inorganic and organic pigments. Fields of application: for enhance products: ONIX, PALLADIUM, TUSCANIA-OIL, TIROIL, 41 and CARESS OIL PLUS, FLUOIL, TECNO, ROYAL WAX OIL. Color version: white, yellow, red, chestnut, walnut, black. Performance: finisher/fluid-based polishing waxes in dispersion fine with great penetration capacity and coverage of stone surfaces. Its smooth even at low temperatures, allows a quick and easy application without creating backlogs. Forms a waxy water-repellent finish, outstanding resistance to wear and dirt. Jessica quickly. Leaves no unpleasant odours during use and in closed environments. Does not yellow over time and can also be applied on clear or white materials (marble). Product made of organic solvents with low toxic to man and the environment. The dry residue that is non-toxic protection. Can be easily colored with desired color version OILTONER. Can be mixed with OIL or TUSCANIA PALLADIUM to give extra tone colour of the treated material. Directions for use: SHAKE BEFORE USE. Add OILTONER in the product by mixing or stirring vigorously enhance until homogenous pigment dispersion. Use concentrations (expressed in grams of pigment per litre of product) of individual pigments products are as follows: white: recommended only in products up to a max of 150 g/l. Standard concentration 100 gr/lt – Walnut Chestnut-yellow-red: in all products up to a max of 150 g/l. Standard concentration 50 gr/lt black: in all products up to a max of 70 g/l. Standard concentration 20 gr/lt

TIXO Smacchiatore per la rimozione delle macchie di olio e grasso di origine animale e vegetale su materiali lapidei
TIXO

Stain remover for the removal of oil stains and grease of animal and vegetable origin of stone materials Product in alkaline dispersion thickened to remove oils and animal and vegetable fats, drying oils, soot and residues (carbon black) from absorbent stone materials. Particularly suitable for vertical surfaces and / or localized interventions. FEATURES AND USE: on all stone materials (Cotto, Stone, glazed ceramics, clinker, stoneware, cements, grits, etc.). Do not use on wood, linoleum, rubber and PVC. Protect the painted surfaces and anodized aluminum from contact with TIXO. INSTRUCTIONS FOR USE: ready to use: proceed with the application of the product with a spatula or palette taking care to leave a layer of at least 3-5 mm TIXO on the stain to remove. If necessary, the extractive duration of the action can be increased by covering the wrap with a sheet of plastic material (eg. Soft tape or Domopack) so as to slow down the evaporation. Always let the wrap dry and then proceed to its removal Dry with nylon brush or broom. Rinse with an acid solution (eg. DELICACID or VIACEM diluted 1: 1 in water) the acid-resistant materials, while for the most delicate materials only rinse with plenty of water. Check that it is removed and repeat the application if necessary. YIELD: according to the absorbency and the type of material. On average, with 1 kg of product it is covers about 1-2 square meters of surface. 

ALGANET - Pulitore per la rimozione di incrostazione biologiche come alghe e licheni sui pavimenti e rivestimenti
ALGANET

Stain remover cleaner for fouling Product that removes deposits, even large, algae, moss and other bio-fouling as blackening by micro-organisms, residues of leaves and flowers, animal excrement, urine, etc. It has a strong power sanitizer on surfaces. It develops more effective action of bleach (sodium hypochlorite). FEATURES AND USE: on all surfaces and exterior stone artefacts (Cotto, Natural Stone, Concrete, Klinker, Porcelain tiles, ceramics, etc.). It has a strong power sanitizing of the treated surfaces. INSTRUCTIONS FOR USE: dissolve in a clean bucket of plastic material a part by weight of ALGANET in 6-8 parts of water (eg. 1 kg of powder in 6-8 liters of water) by mixing for several minutes. For maximum cleaning action, use warm water. The solution thus obtained should be used immediately and consumed within 3-4 hours. It can be applied with a brush, sponge, soft cloth, mop. Wet the surface to be treated, leaving the product to act as long as possible. Subsequently, the surface should be rinsed with water to remove dirt degraded. Proteggre plants, textiles, metal and wood. YIELD: with 1 kg of powder are prepared about 6-8 l iters of cleaning solution (average consumption 1 l / 5-7 sqm).  VIDEO

TOGLIRUGGINE LIQUIDO | Smacchiatore per la rimozione della ruggine dalle superfici in materiale lapideo
TOGLIRUGGINE LIQUIDO

STAIN REMOVER FOR RUST REMOVAL FROM STONE MATERIALS FIELDS OF APPLICATION Specific stain remover for the removal of rust stains and metal oxides surfaces in stone material. CHARACTERISTICS TOGLIRUGGINE LIQUIDO: can be used on all stone materials in general (eg cotto, stone, ceramic and cement). Not being an acidic product, it can be used on precious stone materials such as: polished marbles and travertines, polished grits and slates; removes stains from ferrous contamination (eg rusty ferrous objects); fertilizers based on ferrous sulphate for lawns; it works quickly and leaves no residue. In many cases the removal action takes place in a few minutes (5 - 10 minutes). INSTRUCTIONS FOR USE product ready to use. Proceed with the application of TOGLIRUGGINE LIQUID with a paint brush, taking care to leave a generous layer of product on the stain to be removed. Leave the product to act as long as the reaction to the rust extraction has not occurred successfully (the product will take on a purple color); the time necessary for the reaction depends on the type of material. Don’t let the product to dry on the surface. Once the reaction has occurred, it is advisable to remove the product within 10-15 minutes, rinsing with a slightly alkaline water solution (eg SGRISER diluted 10% in water). Repeat the application if necessary. YIELD: according to the absorption of materials. approximately 1 lt / 6 - 10 m² PACKAGING 0.5 lt - 5 lt VIDEO

PULI GRAFF - Prodotto per la rimozione dei graffiti e pennarelli da partei e muri
PULI GRAFF

Stain remover cleaner for inks and dissolving graffiti Product stain remover to remove the ink stone materials, markers, spray paint in general. Do not leave harmful residues in the material and is also effective for the removal of penetrated ink stains in the porosity of the material. It leaves no odor during use. FEATURES AND USE: on all stone materials (Cotto, Stone, Ceramic glazed and not, clinker, stoneware, cement, grit, etc.). Protect painted surfaces, wood and anodized aluminum from contact with PULIGRAFF. INSTRUCTIONS FOR USE: ready to use. Apply the product with a spatula or palette taking care to leave a layer of at least 3-5 mm PULIGRAFF on the stain to remove. If necessary, the extractive duration of the action can be increased by covering the wrap with a stretchable plastic sheet (eg. Soft tape or Domopack) so as to slow down the evaporation. Always let the wrap dry and then proceed to its removal Dry with a nylon brush or broom. Rinse finally with water. YIELD: on average with 1 kg of product it covers about 1-2 square meters of surface.

SMACCHIO POLVERE | Pulitore smacchiatore per sostanze organiche colorate (vino, frutta, caffè, ecc)
SMACCHIO POLVERE

Stain remover cleaner for colored organic matter (wine, coffee, futta, etc.) Product high effectiveness stain remover for the removal of oxidizable colored spots. It removes stains from stone materials: coffee, wine, juice, food residues typically, blood, urine and tannin. FEATURES AND USE: of Natural Stone, Cotto, Cement, grits, Agglomerates Synthetics, Ceramics. INSTRUCTIONS FOR USE: product to be dissolved in water before use and mix until it forms a paste. Do not use metal containers. Proceed with the application of the product with a spatula or plastic scoop, taking care to leave a layer of 2-3 mm SMACCHIO on the stain to remove. If necessary, the extractive duration of the action can be increased by covering the wrap with a sheet of plastic material (eg. Soft tape or Domopack). Allow to dry the pack prior to its removal Dry with nylon brush or broom. Finally, rinse with plenty of water. Control when removing the stain and repeat the application if necessary. Protect metal surfaces. YIELD: on average with 1 kg of prepared mixture (corresponds to about 300 g of powder) it covers about 1 square meter of surface.

SOLVOSIL - Pulitore Smacchiatore per oli, grassi siliconi, colle e cere su cotto, pietra e agglomerato cementizio
SOLVOSIL

Stain remover for mineral oil stains, adhesives, waxes, silicones Product that removes stains of oils and synthetic lubricant greases, glues, waxes and paint materials from terracotta, stone, concrete and stone materials in general. FEATURES AND USE: on all stone materials (Cotto, Stone, Ceramic glazed and not, clinker, stoneware, cement, grit, etc.). Do not use on synthetic and synthetic slurries agglomerations. It possesses rapid and powerful action of dissolution of stains without leaving marks in the materials of which it is used. It does not leave streaks in the materials of which it is used. Thanks to the special addesante, the action of the product can be in time. INSTRUCTIONS FOR USE: ready to use product. OPEN WITH CAUTION. Mix well. Apply the product with a spatula or palette taking care to leave a layer of at least 3-5 mm SOLVOSIL on the stain to remove. If necessary, the extractive duration of the action can be increased by covering the wrap with a stretchable plastic sheet. Always let the wrap dry and then proceed to its dry-removal nylon brush or broom. Finally rinse with a mild detergent solution (eg. UNIPUL diluted in water). If necessary, repeat the application. Protect the painted and plastic surfaces. YIELD: on average with 1 kg of product it covers about 1-2 square meters of surface.

marbecdef2 - Kit di manutenzione per cotto e pietra versione oapca
Kit di manutenzione cotto e pietra, Finitura opaca

Kit with everything you need for cleaning and maintenance of treatments carried out on cooked, stones and absorbing domestic conglomerates. Matt finiturare version. Contains -1 liter of detergent FLORA -1 lt maintenance wax REFIX MATT -1 red Plug to take signs of rubber shoes -1 undiluted fleece

marbecdef2- Kit di manutenzione cotto e pietra. Versione lucida
Kit di manutenzione cotto e pietra, Finitura lucida

Kit with everything you need for cleaning and maintenance of treatments carried out on cooked, stones and absorbing domestic conglomerates. Version with polished finiturare. Contains -1 liter of detergent FLORA -1 lt maintenance wax POLISHED REFIX -1 red Plug to take signs of rubber shoes -1 undiluted fleece