To download this PDF you have to log in first with your Marbec Account:
Request a free consultation by filling out the form below and send us your request.
STAY UP TO DATE WITH OUR FRESH NEWS
Crystallizer liquid stones and polished calcareous materials
Product crystallizing liquid for periodic polishing of high traffic superfci, such as limestone, marble, and limestone traverti concrete conglomerates. Renews and preserves the shine of the floors and facilitates routine cleaning.
FEATURES AND USE: for polishing marble, travertine, calcareous agglomerates. Do not use on Granites, Slates, Sandstone, Ceramic Materials and synthetic agglomerates.
INSTRUCTIONS: KW-L is ready for use. Shake before using. Clean and degrease the surface well. A dry pavement spray KW-L nebulizzandolo on the surface and immediately work with brush equipped with steel wool disc until complete absorption of the product and the polishing of the floor. Treat 1-2 square meters at a time. Rinse off after a few hours with water and mild detergent (eg. UNIPUL). For a better shine, polish the floor with a white disk.
in the periodic maintenance 1 lt / 40-60 sqm;
on very worn surfaces 1 lt / 10-30 sqm.
Acid crystallizer in powder for marble and travertine
Powder for the crystallization of marble and travertine surfaces. The powder gives brightness to the surfaces without creating films and keeping the natural aspect. It makes the surface permeable to water and dirt making the cleaning easier.
CHARACTERISTICS AND USE: KW-P is a powder crystallising for the polishing of marbles, travertines and calcareous stones that can be polished. Do not apply on granites, slates, sandstone, ceramic materials, synthetic agglomerates.
INSTRUCTIONS FOR USE: the product can be used with floor scrubber and white disc (on floors and big surfaces) or with a drill equipped with a backing pad with wool polishing bonnet (on little surfaces, as tops, shelves, tables, etc). On badly corroded surfaces we recommend to sand down in advance the material with an abrasive paper of grain 400 and 800.
WITH FLOOR SCRUBBER: spill 20-60 gr of powder KW-P on the surface, lay the white disc and nebulize water along the surrounding area of the disc during the friction until the apparition of a white mash. Proceed working the product on a few square meters during a few minutes. Add a bit of water to the powder to maintain the creaminess of the product. Then proceed like above. Do not leave the paste to dry on the surface! Once the crystallisation process is over, remove the residues with a machine able to aspirate the liquids. After the crystallization of all the surface, clean with a neutral detergent solution (ex. UNIPUL diluted 5% in water).
WITH DRILL AND WOOL POLISHING BONNET: wet in advance the surface with water, spill a few grams of powder under the backing pad and scrub strongly doing pressure on the backing pad for a few minutes, until obtaining a white mash. Eliminate with water and sponge the formed residue and leave it to dry.
YIELD: depending on the porosity and the material to polish and on the number of applications. Ordinarily: 1 kg /30 - 40 m².
PACKAGING: 800gr - 4 kg
Polishing powder for granite and ceramic materials
Product for wet polishing of granite floors, ceramic materials and porcelain stoneware. It gives shine to the surface without creating films. Mentiene the natural aspect of the material and makes the surfaces slightly permeable to water and dirt, which facilitates cleaning.
FEATURES AND USE: all stones such as silica and silicate materials (granite, polished porcelain tiles and other ceramic materials).
INSTRUCTIONS: ready. Wet the floor with clean water. Pour 30-60 gr (a KW-SPECIAL dust on the surface fist), place the white disk on dust and spray water in the area surrounding the disc, until obtaining a creamy consistency of the powder. Continue working on 1-2 square meters at a time for a few minutes, add water to keep the creaminess of the product. DO NOT allow to dry the dough on the surface! After the polishing process, remove the residue with a wet vacuum cleaner. After polishing of the entire surface, clean with mild detergent solution (eg. UNIPUL diluted 5% in water).
YIELD: normally 1 kg / 30-40 sqm.
Request a free consultationwithout obligation