CHOOSE PRODUCT:

Select your product from the list or search for Type


MONOFLEX

Impregnating resin and a hardener for "wet look" in a solvent base Description: protective polyurethane resin-based aliphatic mono-component low viscosity non yellowing. Fields of application: on all absorbent stone materials (brick, stone, marble, granite, agglomerated note, cement, etc.) on vertical and horizontal surfaces installed outdoors. Performance: MONOFLEX with its composition based on special resins with low viscosity polyurethane makes it ideal to protect all porous surfaces producing a marked "wet look". Although not a waterproofing product drastically reduces water absorption and staining substances while maintaining a good traspirabilit of porous media (not film). The yellowing resistance makes it especially suitable for outdoor applications. Consolidates the dusty surfaces of materials increasing resistance to wear and eliminating the release of dust. Can be easily with pigment dyes for polyurethanes. Instructions for use: mix well before use. Treated surfaces must be clean and completely dry. There should be no dampness of ascent from moist substrates. Make sure the material is porous and absorbing liquids. In case of doubt adhesion tests. The product can be used pure or diluted with xylol or solvent for Polyurethanes (max 1: 2 dilution in volume) as a function of the absorption of materials or the final look you want to achieve. Thanks to its low viscosity, can be applied to MONOFLEX roller (fine hair), spray, brush, soft cloth (microfibre perfect) making sure to fully saturate the material with care not to ever dry the product as long as it did not happen the complete absorption by redistributing or dabbing any excesses. Can be applied one or more hands depending on the media saturation. The second coat should be applied after 2-4 hours (no more than 6 hours) from the first.

PRIMER 1

Adhesion primer in a solvent base for stone materials Product adhesion promoter indifferently on porous substrates such as concrete, fiber cement, or on supports little or nothing porous such as tiles, monocotture, bicotture, terracotta, gravel, cement, marble and granite. Characteristics and use: is used as adhesion promoter indifferently on porous substrates such as concrete, fiber cement, or on supports little or nothing porous such as tiles, monocotture, bicotture, terracotta, gravel, cement, marble and granite. The product always applies on support dry, clean, free from fats, oils and old paintings. Instructions for Use: Prepare the surface by sandblasting to recovery (blasting), bushhammering and milling grinding dry sanding,. After thorough mixing of the base with the hardener, primer 1 applies to Pile Roller medium or long hair (non-synthetic) spray, airless or air with airbrush. Yield: adhesion to the concrete > 3N/mm2. Full cure at 23°C - 7 days.

PRIMER 2

Adhesion primer water based resin coating and concrete Description: 2-component epoxy resin based water compatible with hydraulic binders. Fields of application: Is used as adhesion promoter for resinous coatings, mortars, concretes, fresh cement surfaces aged also smooth. It is also used as adhesion promoter for epoxy to wet cycles. The product can be applied as is or mixed with cement or 425 Ptl325 and/or quartz. The product always applies on surfaces and clean, free of bulk parts, grouts, disarming oils. Performance: Adhesion to concrete > 3N/mm2 complete hardening to 23 C 7 days Directions for use: The methodology for preparation of the substrate must be made taking into account the nature and consistency of support and subsequent working phases. The surface, however, after the preparation should not present inconsistent parts or branches, old paint/or substances that could affect adhesion. The preparation of surfaces should be carried out by hydro-blasting, shot peening, and milling. Roller applies: the product can be applied as is, after mixing the two components (base + hardener) or mixed with Ptl cement 325 or 425 in 1.1 ratio by weight. When the application, in addition to promote adhesion of subsequent layers, also has the function of vapor barrier, the product must be used always added with cement and we recommend applying with brush. With the application the spatula can be applied to layers with variable thicknesses ranging from 1-2 mm, depending on the grain size of quartz used. We recommend that you do not exceed the thicknesses shown to have no risk of cracking. When you apply the PRIMER 2 spatula should be mixed with Ptl 0 325 425 and quartz in reports in 1: 1 weight: 1 inert resin cement. To improve the flow of dough add up 30% of clean water. When the 2 PRIMER is used as adhesion promoter in Jet shooting and/or mortars, the application of the new Jet or malta must occur within the open 60 ' time. Environmental conditions of high temperatures, dry and ventilation the open time is reduced, then it must be empirically operate with the primer applied still soft and that dirty fingers to touch.

ANTISTAUB

Impregnating resin, dusters "wet look" under water Description: Transparent BiComponent resin, high vehicle based on epoxy resins under water. Fields of application: For wet cement also moist media in internal premises subjected to light traffic. Performance: Eliminates the dust caused by the concrete surface and allows a more easy to clean. The application creates thickness and therefore the final aspect riprodurr or imperfections can be not perfectly uniform (most areas dark, opaque surfaces, etc.) to the different absorption of the support. Instructions for use: preparation of the surface you have to carefully brush with synthetic felt wet and rinse, on hard surfaces and closed we recommend sanding or grinding. If the media are very hard, non-porous, and possibly a dark color, may have been added to concrete hydro-fobizzanti additives or otherwise preventing the penetration depth of the product. In this case use solvent-based cycles. The two-component product: base and hardener must be mixed thoroughly prior to applying with mechanical stirrer (RPM 400/800). Apply diluted with water, equal to 1 parts by volume of product and 1 part by volume of water. The amount of dilution water should be slightly increased for very porous supports up to (1: 4 by volume). Dilution of the hand can be reduced slightly to obtain a more uniform surface appearance. In case of roller application thoroughly wash the roller at least every hour, and every time that you stop the application. Generally the application runs with short hair roller, but you can also apply by spraying. It is recommended, in case of interruption of the application, by oversee roller wash immediately with water.

EPOXYFIN 2

Epoxy resin bi-component with a low thickness with high mechanical and chemical resistance Product on the basis of water to make a dust cover wear, low thickness and with high chemical resistance on concrete floors subjected to traffic not very burdensome. You can obtain high aesthetic values. Characteristics and use: EPOXYFIN 2 serves to provide a dust cover wear, low thickness and with high chemical resistance on concrete floors subjected to traffic not very burdensome. You can obtain high aesthetic values. A possible slight discontinuity of color gives a pleasant aspect of manual dexterity to the surface. Protects the surfaces of cement from the chemical aggression, prevents soiling for absorption, prevents the formation of dust, makes for easy cleaning and decontamination from radiattivi residues. Valid finishing cycle for the floor with a high or medium thickness INSTRUCTIONS FOR USE: you must carefully brush the surface wet with synthetic felts and rinse; on hard surfaces and closed it is recommended that a sanding or a milling. Applies to roller short-haired. The product is bi-component: base and hardener are mixed thoroughly before application with mechanical stirrer (rpm 500/1000). For the appliczione, see technical data sheet. Yield: Dilution 1 part by volume of water for 2 parts by volume of catalyzed product. Consumption of dough: 0,250 kg/m2 diluted.

IMPERPAV

Self-leveling epoxy two-component water-based Description: Two-component self-levelling epoxy resin under water. Fields of application: It is used to make softwood floor self-levelling coatings continue, raincoats, with excellent impact resistance, wear resistance, chemical and weathering agents, easy cleaning and maintenance. Performance: Compressive strength ASTM D695 > 50 N/mm2 ASTM D695 compression Module 2,200 N/mm2 about tensile breaking load ISO R527 > 18N/mm2 elongation tensile Module 2% ISO R527 1500N/mm2 flexural elastic modulus about UNI 7219 approximately 480 N/mm2. Directions for use: The preparation of surfaces should be carried out by blasting (peening) recovery, Bush-hammering, milling, SECO-do the same conditions. IMPERPAV always applies on dry, clean, free from oil, grease and old paintings. IMPERPAV applies normally on suitable adhesion promoter according to the nature, conditions of support and sovrapponibilit times. The product applies, with American-type toothed spatula to check thickness made after the mixing with hardener. The product must be mixed with quartz aggregates in inert resin ratio 100: 70. The application of low thickness, or tem-low temperatures, can apply for reduced quantities of Quartz. It is possible to apply the roller product, in this case need to dilute it with 3-5% of denatured alcohol. The neutral version can be colored with pigment pastes 0.900 KG to 19.10 (A + B) of neutral IMPERPAV. The application of thin layers some colours (e.g. yellow, Orange, purple, etc.) must be sovradosate 1.8 Kg per IMPERPAV's why you 19.10 can have a little opaque effect.

PAV B50 ECO LUCIDO

Finishing resin bi-component polyurethane resin Product bicomponent aliphatic polyurethane in aqueous emulsion CHARACTERISTICS AND USE: is used as a finishing layer on the resin coatings to increase the chemical resistance and wear, besides ensuring a pleasant aesthetic appearance. It also has an excellent resistance to the aggression of the external environment while maintaining over time its brilliance. Instructions for Use: surfaces must be dry, clean, free from oils and fats. The product shall apply on funds compatible, generally epoxy or polyurethane or epossipoliuretanici after light sanding if exceeded the maximum time of coating provided. In order to obtain a film very uniform, the product should be applied by spray . There are no aesthetic requirements very stringent applies to Pile Roller short for polyurethanes. Applies to crossing the rolled. Mix perfectly all the material (base and hardener) with the maximum care that against the walls and the bottom of the container does not remain parts of product not well mixed. It is essential to carry out the mixing impeller with a minimum speed of 400g/min. Yield: view the product technical sheet.

PAV B50 ECO MATT

Finishing resin bi-component polyurethane resin Product bi-component aliphatic polyurethane in aqueous emulsion CHARACTERISTICS AND USE: is used as a finishing layer on the resin coatings to increase the chemical resistance to wear, as well as ensure a pleasant aesthetic appearance. It also has an excellent resistance to the aggression of the external environment while maintaining over time. Instructions for Use: surfaces must be dry, clean, free from oils and fats. The product shall apply on funds compatible, generally epoxy or polyurethane or epossipoliuretanici after light sanding if exceeded the maximum time of coating provided. In order to obtain a film very uniform, the product should be applied by spraying. Unless there are aesthetic requirements very stringent applies to Pile Roller short for polyurethanes. Applies to crossing the rolled. Mix perfectly all the material (base and hardener) with the maximum care that against the walls and the bottom of the container does not remain parts of product not well mixed. It is essential to carry out the mixing impeller with a minimum speed of 400g/min. Yield: consumption of dough 0.060 kg/m2 to 0,020 mm of thickness. View the product technical sheet.

PAVIDURA

Bi-component resin of the finish on resin coatings Resin product bi-component aliphatic polyurethane. Versions: transparent, neutral colored. Characteristics and use: is used as a finishing layer on the resin coatings to increase the chemical resistance to wear, as well as ensure a pleasant aesthetic appearance. It also has an excellent resistance to the aggression of the external environment while maintaining over time its brilliance. Instructions for Use: surfaces must be dry, clean, free from oils and fats. The product shall apply on funds compatible, generally epoxy or polyurethane or epossipoliuretanici after light sanding if exceeded the maximum time of coating provided. In order to obtain a film very closed and therefore to maximize the characteristics of chemical resistance, the product should be applied by spray or brush.unless there are aesthetic requirements very stringent applies to Pile Roller short for polyurethanes. Applies to crossing the rolled. Mix perfectly all the material (base and hardener) with the maximum care that against the walls and the bottom of the container does not remain parts of product not well mixed. Yield: consumption of dough 0.250 kg/m2 diluted.

Quarzo

For info request info to the technical Office.