IDROWIP


WATER-REPELLENT PROTECTIVE WATER BASED FOR STONE ABSORBENT MATERIALS

FIELDS OF APPLICATION
For the water-repellent treatment of absorbent stone materials: cotto, brick, Natural stone with high absorption, cement, Mineral plaster in interior and exterior.
CHARACTERISTICS
Protective impregnator with exceptional penetration and diffusion capacity within the porosity of absorbent stone materials. It forms a water repellent chemical barrier which:
On highly absorbent materials it is recommended to apply the product in the phases prior to laying or grouting the material, in order to protect the surface and facilitate and speed up the subsequent processing steps. Water based product without specific danger and toxicity for the user and the environment. The protection given to the absorbent material by IDROWIP, applied as instructed, maintains the permeability to the original water vapor (determination according to NORMAL 21/85) reducing it to a value <20% depending on the type of material (non-filmogenic protection with high permeability to vapor). I
NSTRUCTIONS FOR USE
It can also be applied on uniformly damp surfaces. Shake before using. It can be applied by spray (recommended) or cloth, sponge, fleece to spread wax, rag, evenly wetting the surface to be treated, following the absorption of the mate-rial. Redistribute any excesses on the material with a cloth during the drying phase. Normally it dries in 4 - 8 hours depending on the aeration. During the wet and cold season and in closed or poorly ventilated rooms, the drying time can be considerably longer.
It is applied to saturation of the material:
The application of the second coat must be carried out as soon as the first one has been absorbed and without waiting for the surface to dry (“wet on wet”). The other treatment products can be applied, where required (other anti-stain protective products, wax finishers, etc.). Wash the equipment with water before drying the product. Avoid that the surfaces just treated are wet from rain before 12 hours.
YIELD
Depending on the the absorption of the materials:
- on poorly absorbent material 1 lt / 8 - 15 m²;
- on very absorbent material 1 lt / 4 - 8 m².
PACKAGING
1 lt - 5 lt - 20 lt.

Related Products: